Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Coilcraft's SWB1010-SMLB RF Transformer offers inductance of 780uH, max cutoff freq of 100MHz, and min cutoff freq of 0.005GHz. Ideal for RF applications with surface mounting feature. Operating temp range -40 to 85°C makes it versatile for various electronic designs.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
AZTECH Wire
$17.620
$16.920
$16.580
$16.250
Ampacity Inc.
$705.000
Argo Parts USA
Continental Prestige Electronics
Bastille Electronics
High inductance allows for efficient signal transformation and transmission.
TR packing method indicates the use of tape and reel packaging, making it convenient for automated manufacturing processes.
With a maximum operating temperature of 85°C, this RF transformer can withstand high temperature environments and prolonged use.
The low minimum cutoff frequency of 0.005 GHz ensures that this transformer can handle a wide range of RF signals with precision.
With a minimum operating temperature of -40°C, this transformer can operate in cold environments without issues.
The matte tin finish with nickel barrier provides excellent conductivity and corrosion resistance for reliable performance.
Compact height makes this RF transformer suitable for applications where space is limited.
Narrow width allows for easy integration into circuit designs with constrained dimensions.
High maximum cutoff frequency of 100 MHz enables this transformer to handle high-frequency signals with accuracy.
Designed specifically for RF signal transformation, ensuring optimal performance in RF applications.
Surface mount design makes installation easy and allows for close placement to other components on the circuit board.
The moderate length of 7.87 mm strikes a balance between compact size and ease of handling during assembly.
RF Transformers SWB1010-SMLB attributes and parameters. Explore more RF Transformers devices from Coilcraft
Additional Features:
Maximum Cutoff Frequency:
Minimum Cutoff Frequency:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Inductance (Primary):
Terminal Finish:
Transformer Type:
Width:
SWB1010-SMLB Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
617DB-1018
Toko
The Toko 617DB-1018 RF Transformer has 3 dB insertion loss, with dimensions of L4.4xB3.8xH3.2 (mm) and a min cutoff frequency of 2 GHz. Ideal for applications requiring surface mount RF transformers with a max cutoff frequency of 2000 MHz and a turns ratio of 1:1.
1812WBT-2LC
Coilcraft
1812WBT-2LC by Coilcraft is an RF Transformer with 1 dB Insertion Loss, 5.3 uH Primary Inductance, and 0.8 GHz Min Cutoff Frequency. Ideal for surface mount applications in RF circuits operating b/w -40 to 85 °C, offering precise signal transformation capabilities.
BAL-UWB-01E3
BAL-UWB-01E3 by STMicroelectronics is an RF transformer with a low insertion loss of 1.2 dB, operating b/w 3000 GHz and 8000 MHz. It supports surface mount applications and functions effectively in temperatures ranging from -40 °C to 105 °C. Ideal for high-frequency communication systems, it ensures reliable signal integrity.
TT1-6-KK81+
Mini-circuits
The Mini-circuits TT1-6-KK81+ RF Transformer has a power rating of 0.25W and insertion loss of 3dB. With dimensions L7.62xB6.86xH5.84 (mm), it is ideal for matching applications in the frequency range from 4KHz to 300MHz, with a max operating temperature of 85°C.
1812WBT-3LC
1812WBT-3LC by Coilcraft is an RF Transformer with 1 dB Insertion Loss, 1.25 uH Inductance, and operates b/w -40 to 85°C. Ideal for applications requiring a min cutoff frequency of 4 GHz, max cutoff frequency of 200 MHz, and surface mounting feature.
ADT1-1WT-1
The Mini-circuits ADT1-1WT-1 RF Transformer has a power rating of 0.25W, insertion loss of 1dB, and max DC unbalance current of 30mA. It is designed for signal applications with a min cutoff frequency of 1GHz and operates in temperatures ranging from -20°C to 85°C. Ideal for surface mount installations, it comes in tape & reel packaging and measures L7.87xB5.59xH2.84mm.
NCR2-113+
NCR2-113+ by Mini-circuits is an RF transformer with 2.7 dB insertion loss, operating temperature range of -40 to 85 °C, and cutoff frequency from 3.5 GHz to 11 GHz. Ideal for surface mount applications in RF circuits due to compact dimensions of L2.49xB2.01xH0.89 mm and TR packing method.
TC1-1T+
TC1-1T+ by Mini-circuits is a RF transformer with 0.25W power rating, 3dB insertion loss, and 1.5GHz min cutoff frequency. Ideal for signal applications, it operates b/w -40 to 85°C temperatures and has dimensions of L3.81xB3.81xH4.06 mm for surface mounting method.
HHM1589B1
TDK
TDK's HHM1589B1 RF Transformer offers low insertion loss of 1.4 dB, with a wide operating temperature range from -40°C to 85°C. This surface mount transformer has dimensions of L2.0xB1.25xH0.95 (mm) and is ideal for applications requiring high-frequency signal conversion up to 710 MHz, such as in RF communication systems or wireless devices.
MABAES0060
M/a-com Technology Solutions
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: GOLD OVER NICKEL; Width: 3.81 mm; Additional Features: IMPEDANCE RATIO IS 1:1; Minimum Cutoff Frequency: .3 GHz;
Z9314-ALC
Coilcraft's Z9314-ALC RF Transformer offers 1.1 dB insertion loss, 4.5 uH inductance, and a max cutoff frequency of 1700 MHz. Ideal for surface mount applications in RF circuits with temperatures ranging from -40 to 85 °C.
MABA-007159-000000
TE Connectivity
TE Connectivity's MABA-007159-000000 RF Transformer features 3.5 dB Insertion Loss, 4.5 GHz Min Cutoff Freq, and 3000 MHz Max Cutoff Freq. Ideal for applications requiring high-frequency signal transformation in compact spaces with surface mounting feature.
BALF-NRF01J5
BALF-NRF01J5 by STMicroelectronics is a compact RF transformer ideal for wireless applications. It features an insertion loss of 2.4 dB, operates b/w -40 °C to 85 °C, and covers frequencies from 2400 MHz to 2540 MHz. Its surface mount design ensures easy integration into devices.
SWB2010-1-SMLD
Coilcraft's SWB2010-1-SMLD RF Transformer offers 95uH inductance, 175MHz max cutoff frequency, and -40 to 85°C operating range. Ideal for surface mount applications in RF circuits with a min cutoff frequency of 0.04GHz.
TC1-1-43+
The Mini-circuits TC1-1-43+ RF Transformer offers 2 dB insertion loss and can handle up to 30 mA DC unbalance current. With dimensions of L3.81xB3.81xH4.06 mm, it is suitable for signal applications with a frequency range from 650 KHz to 4000 MHz at temperatures ranging from -40 to 85 °C.
PWB2010LC
The Coilcraft PWB2010LC RF Transformer has a power rating of 0.25W, insertion loss of 0.2dB, and primary inductance of 780uH. It is used for signal applications with a max operating temperature of 85°C and min cutoff frequency of 0.0035GHz.
0900BL15C050E
Johanson Technology
Johanson Technology's 0900BL15C050E RF Transformer offers low insertion loss of 1.2 dB, operating temperature range from -40 to 85°C, and cutoff frequency ranging from 800 MHz to 1000 GHz. Ideal for surface mount applications in RF circuits for efficient signal transformation.
TP-220
Synergy Microwave
TP-220 by Synergy Microwave is an RF transformer with a 3 dB insertion loss. It has a min cutoff frequency of 0.08 GHz and a max cutoff frequency of 340 MHz. This through-hole mounted transformer is commonly used in RF applications for impedance matching and signal isolation.
BD3150N50100AHF
Ttm Technologies
BD3150N50100AHF by Ttm Technologies is an RF Transformer with 0.9 dB Insertion Loss, 3100 GHz Min Cutoff Frequency, and 7000 MHz Max Cutoff Frequency. Ideal for surface mount applications in RF circuits due to its compact dimensions of L1.04xB1.04xH0.57 (mm) and NICKEL GOLD terminal finish.
TC1-1-13MG2
Mini-circuits TC1-1-13MG2 RF Transformer has 50Ω impedance, 3.02 dB insertion loss, and operates from -40 to 85°C. Ideal for signal applications with a frequency range of 4.5 kHz to 3 GHz, this surface-mount transformer is compact at 3.81mm x 3.81mm x 3.81mm in size.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SWB1010-SMLD
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Height: 5.72 mm; JESD-609 Code: e3; Width: 6.86 mm;
SWB1015-SMLD
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Inductance (Primary): 80 uH; Maximum Operating Temperature: 85 Cel; Packing Method: TR, EMBOSSED PLASTIC, 13 INCH; Additional Features: IMPEADANCE RATIO: 1.5:1;
SWB1015-PCL
RF TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Additional Features: IMPEADANCE RATIO: 1.5:1; Inductance (Primary): 80 uH; Minimum Operating Temperature: -40 Cel;
SWB1010-1-PCL
RF TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Maximum Operating Temperature: 85 Cel; Minimum Cutoff Frequency: .04 GHz; Width: 6.86 mm;
SWB1010-1-SMLB
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Inductance (Primary): 95 uH; Maximum Cutoff Frequency: 175 MHz; Length: 7.87 mm;
SWB1015-SMLB
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Width: 6.86 mm; Minimum Cutoff Frequency: .1 GHz; Height: 5.72 mm;
SWB1040-SMLB
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3; Maximum Operating Temperature: 85 Cel; Length: 7.87 mm;
SWB1010-PCL
RF TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Additional Features: IMPEADANCE RATIO: 1:1; Maximum Cutoff Frequency: 100 MHz; Minimum Cutoff Frequency: .005 GHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved