Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Width: 6.86 mm; Minimum Cutoff Frequency: .1 GHz; Height: 5.72 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
RF Transformers SWB1015-SMLB attributes and parameters. Explore more RF Transformers devices from Coilcraft
Additional Features:
Maximum Cutoff Frequency:
Minimum Cutoff Frequency:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Inductance (Primary):
Terminal Finish:
Transformer Type:
Width:
SWB1015-SMLB Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
LM358M
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Rfe International
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32H753BIT6
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
Semtech Electronics
ULN2803ADWR
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
LDB212G4020C-001
Murata Manufacturing
Murata Manufacturing's LDB212G4020C-001 RF Transformer has impedance of 50Ω primary and 100Ω secondary, with insertion loss of 1.05 dB. It is a surface mount transformer for signal applications, operating b/w -40°C to 85°C, with cutoff frequency ranging from 2.3 GHz to 2.5 GHz.
WBC16-1TLC
Coilcraft
WBC16-1TLC by Coilcraft is a RF transformer with 0.25W power rating, 300V isolation voltage, and 0.8dB insertion loss. Ideal for isolation applications, it operates b/w -40 to 85°C temperatures and has a min cutoff frequency of 0.6GHz.
WBC2-1TLB
Coilcraft's WBC2-1TLB RF Transformer offers low 0.5 dB insertion loss, 10 uH primary inductance, and a wide frequency range from 0.2 GHz to 500 MHz. Ideal for surface mount applications in RF circuits, this transformer operates b/w -40°C to 85°C with compact dimensions of L4.45xB4.19xH3.05 mm.
PA0908NL
Pulse Electronics
PA0908NL by Pulse Electronics is an RF Transformer with inductance of 216uH, dimensions L29.46xB25.4xH10.2 (mm), and max cutoff frequency of 0.7 MHz. Ideal for applications requiring surface mounting feature, it operates b/w -40 to 125 °C and has a min cutoff frequency of 0.2 GHz.
TTWB2040LD
Coilcraft's TTWB2040LD RF Transformer offers 400V isolation voltage, 0.4dB insertion loss, and 25uH inductance. Ideal for power applications, it operates b/w -40 to 85°C with a frequency range of 150kHz to 400MHz. This surface mount transformer has dimensions of L6.35xB6.1xH4.7mm and is suitable for various RF circuit designs.
1812WBT-5LC
1812WBT-5LC by Coilcraft is an RF Transformer with 1.5 dB Insertion Loss, 0.09 uH Primary Inductance, and a Max Cutoff Frequency of 645 MHz. Ideal for high-frequency applications in electronics requiring precise signal transformation and low loss transmission.
MABA-007159-000000
M/a-com Technology Solutions
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR; Maximum Operating Frequency: 3000000 KHz; No. of Winding (Secondary): 1; Minimum Operating Frequency: 4500 KHz;
BALF-SPI2-02D3
STMicroelectronics' BALF-SPI2-02D3 RF Transformer has 3.6 dB Insertion Loss, operates b/w -40°C to 105°C, and features Tin/Silver/Copper terminal finish. Ideal for surface mount applications in various RF circuits due to its compact size of 1.6mm x 2.15mm x 0.68mm.
BALF-NRG-01D3
STMicroelectronics' BALF-NRG-01D3 RF Transformer has -1.1 dB insertion loss, 2400 GHz min cutoff frequency, and 2500 MHz max cutoff frequency. Ideal for surface mount applications in temperature range of -40 to 105°C.
MABA-010247-2R1250
MABA-010247-2R1250 by M/a-com: RF Transformer with 4dB Insertion Loss, 1GHz Min Cutoff Freq, and 1600MHz Max Cutoff Freq. Ideal for surface mount applications in RF circuits due to compact L4.21xB4.21xH2.7mm dimensions and operating temp range of -40°C to 85°C.
HHM1523C1
TDK
The TDK HHM1523C1 RF Transformer features low insertion loss of 1.1 dB, with dimensions L2.0xB1.25xH0.95 (mm). Ideal for applications requiring a min cutoff frequency of 880 GHz and max operating temperature of 85°C, this surface mount transformer operates in the frequency range up to 960 MHz.
WB1010-SMLD
Coilcraft's WB1010-SMLD RF Transformer offers 780uH inductance, operates b/w -40 to 85°C, with a frequency range of 0.005GHz to 100MHz. Ideal for surface mount applications in RF circuits requiring precise signal transformation and filtering capabilities.
ATB3225-75034CT
The TDK ATB3225-75034CT RF Transformer has 2dB insertion loss, operates b/w -25°C to 85°C, with a cutoff frequency range of 1GHz to 100MHz. Ideal for surface mount applications in RF circuits due to its compact size and high-frequency capabilities.
WB2010-1-SMLB
Coilcraft's WB2010-1-SMLB RF Transformer offers 95uH inductance, operates b/w -40 to 85°C, with cutoff frequencies ranging from 0.04GHz to 175MHz. Ideal for surface mount applications in RF circuits.
HHM1570B1
The TDK HHM1570B1 is a surface mount RF transformer with an insertion loss of 1 dB. It has dimensions of L2XB1.25XH0.95 (mm) and can operate at temperatures ranging from -40 to 85 °C. This transformer is commonly used in applications requiring RF signal transformation and amplification.
WB1-6TSLD
Coilcraft's WB1-6TSLD RF Transformer offers low insertion loss of 0.2 dB and inductance of 70 uH. With dimensions L8.26xB7.24xH5.72 mm, it is ideal for applications requiring a min cutoff frequency of 0.05 GHz, such as RF signal processing in electronics.
PWB-2-BLC
Coilcraft's PWB-2-BLC RF Transformer offers 0.25W power rating, 300V isolation voltage, and 0.35dB insertion loss. Ideal for signal applications with inductance of 75uH, it operates b/w -40 to 85°C and has a max cutoff frequency of 400MHz. This surface mount transformer is compact at L6.48xB7.2xH4.45mm, making it suitable for various RF signal processing tasks.
JT-1975
Mini-circuits
JT-1975 by Mini-circuits is a RF Transformer with 0.25W power rating, 3dB insertion loss, and 1:2.5 turns ratio. Ideal for matching applications, it operates b/w -20 to 85°C with cutoff frequencies ranging from 40kHz to 80MHz.
SWB3010-SMLD
Coilcraft's SWB3010-SMLD RF Transformer offers 780uH inductance, 100MHz max cutoff frequency, and -40 to 85°C operating range. Ideal for surface mount applications in RF circuits requiring precise signal transformation with a min cutoff frequency of 0.005GHz.
PCT-27
Stancor Products
The Stancor Products PCT-27 RF Transformer has a max operating temp of 105°C, min cutoff freq of 0.0003 GHz, and through-hole mounting feature. Ideal for applications requiring a transformer with a turns ratio of 2:1:1, such as in RF circuits for signal conversion and amplification.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved