Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper -Matte Tin -with Nickel barrier; No. of Winding (Primary): 1; Additional Features: HEIGHT DIM INCLUDES TERMINAL ALSO; Packing Method: TR, EMBOSSED PLASTIC, 7 INCH;
Median Price
$5.550
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
< 1k
Coilcraft
1+ parts
$2.690
100+ parts
-
1k+ parts
$1.560
10k+ parts
$1.220
Farnell
$5.270
$3.740
$3.360
Mouser Electronics
$5.830
$2.660
Element14
$7.660
$3.490
Andel Nordic
$5.761
$5.531
RF Transformers PWB2040LC attributes and parameters. Explore more RF Transformers devices from Coilcraft
Additional Features:
Application:
Maximum Cutoff Frequency:
Minimum Cutoff Frequency:
Maximum DC Unbalance Current:
Height:
Insertion Loss:
Isolation Voltage:
Length:
Load Resistance:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Power Rating:
Inductance (Primary):
Sub-Category:
Terminal Finish:
Transformer Type:
Width:
PWB2040LC Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
Infinex
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3203F
Idec
ROTARY SWITCH;
BALF-NRG-02J5
STMicroelectronics
RF TRANSFORMER;
ADT4-1T
Mini-circuits
Mini-circuits' ADT4-1T RF Transformer has 1W power rating, 3dB insertion loss, and 30mA max DC unbalance current. Ideal for matching applications with a frequency range from 9GHz to 625MHz. Compact size of L7.87xB5.59xH2.84 (mm) makes it suitable for surface mount installations in various RF systems.
P3801
Etal Group Ab
P3801 RF Transformer by Etal Group Ab features 1.5 dB insertion loss, 0.0002 GHz min cutoff frequency, and 0.004 MHz max cutoff frequency. Ideal for applications requiring high-frequency signal transformation with approvals from IEC, CUL, and UL.
ADT1-1WT
The Mini-circuits ADT1-1WT RF Transformer has a power rating of 0.5W, insertion loss of 3dB, and max DC unbalance current of 30mA. Ideal for matching applications with frequency range from 400KHz to 800MHz. Compact dimensions L7.87xB5.59xH2.84 (mm) make it suitable for surface mount installations in various RF systems.
BALFHB-WL-04D3
BALFHB-WL-04D3 by STMicroelectronics is a surface mount RF transformer with an insertion loss of just 1.5 dB. It operates b/w 862 MHz and 928 MHz, making it ideal for high-frequency applications. With a compact size of 2.15 x 1.88 x 0.68 mm, it withstands temperatures from -40 °C to +105 °C.
ADT2-1T-1P+
Mini-circuits' ADT2-1T-1P+ RF Transformer has 1W power rating, 3dB insertion loss, and 30mA DC unbalance current. Ideal for matching applications with a frequency range from 8KHz to 600MHz. Dimensions: L7.87xB5.59xH2.84mm, surface mountable with tin over nickel finish for high-temp environments up to 85°C.
TC4-1TG2+
Mini-circuits TC4-1TG2+ RF Transformer has 2 dB insertion loss, 30 mA max DC unbalance current, and operates from 500 KHz to 300 MHz. Ideal for signal applications with surface mounting feature.
SWB2010-SMLD
Coilcraft SWB2010-SMLD RF Transformer offers 780uH inductance, 100MHz max cutoff frequency, and -40 to 85°C operating range. Ideal for surface mount applications in RF circuits for high-frequency signal transformation.
WBC2-1TLC
Coilcraft's WBC2-1TLC RF Transformer features 10uH primary inductance, 0.5dB insertion loss, and 0.2GHz min cutoff frequency. Ideal for surface mount applications in RF circuits operating b/w -40°C to 85°C.
HFB050100
Pulse Specialty Components
RF TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Manufacturer Series: HFB050100; Packing Method: BULK; Height: 22.86 mm; Minimum Operating Temperature: 0 Cel;
0900BL15C050E
Johanson Technology
Johanson Technology's 0900BL15C050E RF Transformer offers low insertion loss of 1.2 dB, operating temperature range from -40 to 85°C, and cutoff frequency ranging from 800 MHz to 1000 GHz. Ideal for surface mount applications in RF circuits for efficient signal transformation.
LDB31900M20C-416
Murata Manufacturing
LDB31900M20C-416 by Murata is a RF Transformer with impedance of 50Ω primary and 200Ω secondary. It has insertion loss of 0.9 dB, operates b/w -40°C to 85°C, and supports signal applications. This surface mount transformer has dimensions of L1.6xW0.8xH0.6 mm, with cutoff frequency ranging from 800 KHz to 1000 MHz.
BALFLB-WL-09D3
BALFLB-WL-09D3 by STMicroelectronics is an RF Transformer with 2.15 dB Insertion Loss, 470 GHz Min Cutoff Freq, and 510 MHz Max Cutoff Freq. Ideal for applications requiring high-frequency signal transformation in compact electronic devices due to its small dimensions and surface mounting feature.
TC1-1-43+
The Mini-circuits TC1-1-43+ RF Transformer offers 2 dB insertion loss and can handle up to 30 mA DC unbalance current. With dimensions of L3.81xB3.81xH4.06 mm, it is suitable for signal applications with a frequency range from 650 KHz to 4000 MHz at temperatures ranging from -40 to 85 °C.
BAL-UWB-01E3
BAL-UWB-01E3 by STMicroelectronics is an RF transformer with a low insertion loss of 1.2 dB, operating b/w 3000 GHz and 8000 MHz. It supports surface mount applications and functions effectively in temperatures ranging from -40 °C to 105 °C. Ideal for high-frequency communication systems, it ensures reliable signal integrity.
ATB2012V-75011-T01
TDK
TDK's ATB2012V-75011-T01 RF Transformer has 1.2 dB insertion loss, operates from -40 to 105°C, and supports up to 1000 MHz cutoff frequency. Ideal for AEC-Q200 approved automotive applications requiring compact surface mount transformers with a min cutoff frequency of 50 GHz.
TC1-1-13M
Mini-circuits TC1-1-13M RF Transformer features 3dB Insertion Loss, 4.5GHz Min Cutoff Freq, and 3000MHz Max Cutoff Freq. Ideal for surface mount applications in RF circuits with dimensions of L3.81xB3.81xH3.81 mm and operating temperatures from -40 to 85°C.
SWB1010-SMLB
Coilcraft's SWB1010-SMLB RF Transformer offers inductance of 780uH, max cutoff freq of 100MHz, and min cutoff freq of 0.005GHz. Ideal for RF applications with surface mounting feature. Operating temp range -40 to 85°C makes it versatile for various electronic designs.
BALF-SPI-01D3
BALF-SPI-01D3 by STMicroelectronics is an RF transformer with -2 dB insertion loss, 779 GHz min cutoff frequency, and 956 MHz max cutoff frequency. It is used in applications requiring surface mount transformers for RF signal processing at temperatures ranging from -40 to 85°C.
BAL-CC1101-01D3
STMicroelectronics' BAL-CC1101-01D3 RF Transformer offers 1.9 dB insertion loss, 779 GHz min cutoff frequency, and 928 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits operating b/w -40°C to 125°C temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved