Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN SILVER COPPER/TIN OVER NICKEL; Height: 4.45 mm; Additional Features: HEIGHT DIM INCLUDES TERMINAL ALSO; Maximum Operating Temperature: 85 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
RF Transformers PWB-1.5-CLD attributes and parameters. Explore more RF Transformers devices from Coilcraft
Additional Features:
Maximum Cutoff Frequency:
Minimum Cutoff Frequency:
Height:
Insertion Loss:
Length:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Inductance (Primary):
Terminal Finish:
Transformer Type:
Width:
PWB-1.5-CLD Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
RC0402FR-0710KL
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
1N4148WS
Meritek Electronics
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MABA-007159-000000
TE Connectivity
TE Connectivity's MABA-007159-000000 RF Transformer features 3.5 dB Insertion Loss, 4.5 GHz Min Cutoff Freq, and 3000 MHz Max Cutoff Freq. Ideal for applications requiring high-frequency signal transformation in compact spaces with surface mounting feature.
LDB31900M20C-416
Murata Manufacturing
LDB31900M20C-416 by Murata is a RF Transformer with impedance of 50Ω primary and 200Ω secondary. It has insertion loss of 0.9 dB, operates b/w -40°C to 85°C, and supports signal applications. This surface mount transformer has dimensions of L1.6xW0.8xH0.6 mm, with cutoff frequency ranging from 800 KHz to 1000 MHz.
PA0908NL
Pulse Electronics
PA0908NL by Pulse Electronics is an RF Transformer with inductance of 216uH, dimensions L29.46xB25.4xH10.2 (mm), and max cutoff frequency of 0.7 MHz. Ideal for applications requiring surface mounting feature, it operates b/w -40 to 125 °C and has a min cutoff frequency of 0.2 GHz.
0915BM15A0001E
Johanson Technology
Johanson Technology's 0915BM15A0001E RF Transformer has 2 dB insertion loss, operates b/w -40 to 105 °C, with cutoff frequency range of 902-928 MHz. Ideal for surface mount applications in RF circuits due to its compact size and high temperature tolerance.
ADT2-1T-1P
Mini-circuits
Mini-circuits' ADT2-1T-1P RF Transformer has a power rating of 1W, insertion loss of 3dB, and max DC unbalance current of 30mA. Ideal for matching applications, it operates b/w -40 to 85°C with cutoff frequencies ranging from 8KHz to 600MHz.
Z9314-ALC
Coilcraft
Coilcraft's Z9314-ALC RF Transformer offers 1.1 dB insertion loss, 4.5 uH inductance, and a max cutoff frequency of 1700 MHz. Ideal for surface mount applications in RF circuits with temperatures ranging from -40 to 85 °C.
BALFLB-WL-07D3
STMicroelectronics
BALFLB-WL-07D3 by STMicroelectronics is a surface mount RF transformer with an insertion loss of 2.15 dB and operates b/w -40 °C to 105 °C. It features a min cutoff frequency of 470 GHz and max cutoff at 510 MHz, ideal for high-frequency applications. Compact dimensions (2.15mm x 1.88mm x 0.68mm) make it suitable for space-constrained designs.
2450BM15A0015E
Johanson Technology's 2450BM15A0015E RF Transformer features 1.5 dB insertion loss, 2400 GHz min cutoff frequency, and 2500 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with dimensions of L2.0xB1.25xH0.8 (mm).
TC1-1T-152X+
Mini-circuits TC1-1T-152X+ RF Transformer features 2.5 dB insertion loss, 5 GHz min cutoff frequency, and 1500 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with operating temperatures ranging from -40 to 85°C.
PWB3010LC
PWB3010LC by Coilcraft is a RF Transformer with 0.25W power rating, 780uH inductance, and 0.2dB insertion loss. Ideal for SIGNAL applications, it operates b/w -40 to 85°C temperatures with a max cutoff frequency of 125MHz.
WB1.5-6SLD
Coilcraft's WB1.5-6SLD RF Transformer offers low 0.26 dB insertion loss, 56 uH primary inductance, and a wide frequency range from 0.05 GHz to 325 MHz. Ideal for surface mount applications in RF circuits, it operates b/w -40°C to 85°C with matte tin finish and nickel barrier for durability.
1812WBT-3LC
1812WBT-3LC by Coilcraft is an RF Transformer with 1 dB Insertion Loss, 1.25 uH Inductance, and operates b/w -40 to 85°C. Ideal for applications requiring a min cutoff frequency of 4 GHz, max cutoff frequency of 200 MHz, and surface mounting feature.
CX2078
CX2078 by Pulse Electronics is an RF Transformer with 0.6 dB insertion loss, 5 GHz min cutoff frequency, and 500 MHz max cutoff frequency. It is a surface mount transformer suitable for applications requiring UL approvals and operating temperatures ranging from -40°C to 85°C.
BAL-CC1101-01D3
STMicroelectronics' BAL-CC1101-01D3 RF Transformer offers 1.9 dB insertion loss, 779 GHz min cutoff frequency, and 928 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits operating b/w -40°C to 125°C temperature range.
BD3150N50100AHF
Ttm Technologies
BD3150N50100AHF by Ttm Technologies is an RF Transformer with 0.9 dB Insertion Loss, 3100 GHz Min Cutoff Frequency, and 7000 MHz Max Cutoff Frequency. Ideal for surface mount applications in RF circuits due to its compact dimensions of L1.04xB1.04xH0.57 (mm) and NICKEL GOLD terminal finish.
WBC1-1LC
Coilcraft's WBC1-1LC RF Transformer offers low 0.4 dB insertion loss, 10 uH primary inductance, and 600 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits operating b/w -40 to 85°C.
CX2078NL
CX2078NL by Pulse Electronics is a RF Transformer with 0.6 dB Insertion Loss, 5 GHz Min Cutoff Freq, and 500 MHz Max Cutoff Freq. Ideal for applications requiring Surface Mounting, it has dimensions of L4.3xB2.69xH3.0 mm and operates b/w -40 to 85°C temperatures.
BALF-112X-01D3
STMicroelectronics' BALF-112X-01D3 RF Transformer offers -2.8 dB insertion loss, 866 GHz min cutoff frequency, and 928 MHz max cutoff frequency. Ideal for RF applications with surface mounting feature, operating b/w -40°C to 85°C temperature range.
TC1-1T
The Mini-circuits TC1-1T RF Transformer has a power rating of 0.25W, insertion loss of 3dB, and max cutoff frequency of 500MHz. Ideal for power applications, it operates b/w -40 to 85°C temperatures and features a 1:1 turns ratio. This surface mount transformer is suitable for frequencies ranging from 400KHz to 500MHz.
617DB-1018
Toko
The Toko 617DB-1018 RF Transformer has 3 dB insertion loss, with dimensions of L4.4xB3.8xH3.2 (mm) and a min cutoff frequency of 2 GHz. Ideal for applications requiring surface mount RF transformers with a max cutoff frequency of 2000 MHz and a turns ratio of 1:1.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved