Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Coilcraft's PL300-104L is a 300W SMPS transformer with 2 primary windings and 1075uH inductance. AEC-Q200 approved, it operates b/w -40°C to 125°C, ideal for applications requiring a surface mount transformer with a frequency range of 200kHz to 700kHz.
Median Price
$21.495
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$16.030
100+ parts
-
1k+ parts
10k+ parts
Element14
$26.960
$18.850
$15.540
DigiKey Marketplace
$14.550
Vyrian
Nova Conductors
Next Level Components, LLC
Elcom Components
Ampacity Inc.
$9.890
Aranea Global
High power rating ensures efficient performance for a variety of applications requiring substantial power output.
AEC-Q200 certification ensures high reliability and quality standards, making it suitable for automotive applications.
Two primary windings allow for flexibility in the design and customization of the transformer for specific applications.
High inductance value ensures smooth and efficient energy transfer, enhancing the overall performance of the SMPS transformer.
TRAY packing method provides convenient and secure packaging for transportation and storage of the transformer.
High maximum operating temperature ensures reliable performance in various environmental conditions without overheating.
Wide operating temperature range allows for operation in extreme cold conditions, ensuring versatility and reliability.
Compact height enables space-saving installation in tight spaces or compact electronic devices.
Narrow width makes it suitable for applications with limited space while maintaining high power output capability.
Nominal input voltage of 48V ensures compatibility with a wide range of power sources and applications.
Low minimum operating frequency allows for efficient operation in low-power consumption applications while maintaining high performance.
Specifically designed as a Switched-Mode Power Supply (SMPS) transformer, offering high efficiency and performance in power conversion applications.
Surface mounting feature facilitates easy and secure installation on PCBs, making it suitable for compact electronic designs.
Moderate length allows for flexibility in placement within electronic devices while maintaining efficient power transfer capabilities.
High maximum operating frequency enables fast and responsive power conversion, suitable for applications requiring quick and efficient power delivery.
SMPS Transformers PL300-104L attributes and parameters. Explore more SMPS Transformers devices from Coilcraft
Additional Features:
Approvals (V):
Height:
Nominal Input Voltage (V):
Length:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Power Rating:
Inductance (Primary):
Transformer Type:
Width:
PL300-104L Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
New Jersey Semiconductor Products
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ZB1050-AED
Coilcraft
Coilcraft's ZB1050-AED is an 8.25W SMPS transformer with 2 primary windings at 12.5uH, suitable for AEC-Q200 applications. It operates b/w -40 to 85°C, outputs 3.3V, and supports up to 300 KHz frequency, ideal for surface mounting in automotive electronics.
782485/35C
Murata Manufacturing
Murata Manufacturing's 782485/35C is a SMPS transformer with dimensions of 6.35mm x 9.14mm x 9.77mm for through-hole mounting. Ideal for power supply applications due to its compact size and efficient design, packed in tubes for easy handling and storage.
PA5131.004NLT
Pulse Electronics
PA5131.004NLT by Pulse Electronics is a 35W SMPS Transformer with primary inductance of 13uH, operating at -40 to 130°C. It has two windings for both primary and secondary outputs of 3.3V, suitable for surface mount applications in power supplies up to 200KHz frequency.
750315371
Wuerth Elektronik & Kg
Wurth Elektronik 750315371 is a SMPS Transformer with inductance of 72uH, output voltage of 5V, and operating temperature range from -40 to 125°C. It is used for surface mount applications in electronics requiring compact dimensions and approvals like AEC-Q200, CSA, EN, IEC, UL.
POE300F-12LD
Coilcraft's POE300F-12LD is a 30W SMPS transformer with 3 primary windings at 42uH. It operates b/w -40°C to 125°C, outputting 12V. Ideal for surface mount applications in power over Ethernet systems with input voltage range of 36V to 72V.
74032
Power Integrations
74032 by Power Integrations is a 25W SMPS Transformer with primary inductance of 1100uH. It offers an output voltage of 24V and can handle input voltages ranging from 90V to 120V. Ideal for applications requiring efficient power conversion in compact spaces.
750813144
750813144 by Wurth Elektronik is a SMPS transformer with 2 primary windings, 4500V isolation voltage, and 600uH inductance. It is used for applications requiring an output voltage of 28V, operating temperatures from -40 to 125°C, and input voltages ranging from 85V to 265V. This transformer features through-hole mounting and dimensions of L16.5xB18.0xH18.0mm.
C1539-ALD
Coilcraft's C1539-ALD is a 100W SMPS Transformer with primary inductance of 320uH. It operates b/w -40°C to 85°C, outputting 12V. Ideal for surface mount applications requiring compact dimensions (23.37mm x 20.57mm x 9.14mm) and high power efficiency.
NA5743-ALD
Coilcraft's NA5743-ALD SMPS Transformer has 12W power rating, 4uH inductance, and operates b/w -40 to 125°C. Ideal for AEC-Q200 approved applications requiring 80V/30V output voltages with a compact size of 11.43x10.5x12.7mm for surface mounting method.
DA2034-ALD
Coilcraft's DA2034-ALD is a SMPS transformer with 4 primary windings and 10uH inductance. It operates b/w -40°C to 125°C, suitable for applications requiring input voltages from 3V to 24V. With dimensions of L30.0xB20.57xH11.43mm, it is designed for surface mounting in various power supply circuits.
PA0806NL
PA0806NL by Pulse Electronics is a 140W SMPS Transformer with primary inductance of 153uH. It has two windings for both primary and secondary, operating at frequencies from 200KHz to 700KHz. Ideal for surface mount applications in power supplies, it operates b/w -40°C to 125°C temperature range.
750313769
750313769 by Wurth Elektronik is a SMPS Transformer with 340uH primary inductance, 5V output voltage, and -40 to 125°C operating temperature range. Ideal for applications requiring AEC-Q200, CSA, EN, IEC, UL approvals and surface mounting feature.
PA0491NLT
PA0491NLT by Pulse Electronics is a 100W SMPS Transformer with primary inductance of 140uH. It operates b/w -40°C to 125°C, suitable for applications requiring an output voltage of 5V. With dimensions L23.37xB20.07xH8.6 mm, it is designed for surface mounting method and has a frequency range of 200KHz to 700KHz.
ZA9674-BED
ZA9674-BED by Coilcraft is a 12W SMPS Transformer with 9uH primary inductance. It has 2 windings for both primary and secondary, operating at -40 to 85°C. Ideal for applications requiring a max output voltage of 48V, it is AEC-Q200 approved for automotive use.
GA3172-AL
Coilcraft GA3172-AL is a 14W SMPS transformer with primary inductance of 500uH. It operates b/w -40°C to 85°C, outputting 20V. Ideal for power supplies and converters due to its compact L22.75xB14.25xH23.74mm size and through-hole mounting feature.
MTPL-2516-S12V
Vishay Intertechnology
Vishay Intertechnology's MTPL-2516-S12V is a 3W SMPS transformer with 2 primary and secondary windings, inductance of 450uH, and output voltage of 12V. Approved for MIL-PRF-27, it operates b/w -55°C to 130°C. Ideal for applications requiring a max input voltage of 380V and operating frequency range from 100KHz to 500KHz.
FL2015-2LD
Coilcraft's FL2015-2LD is a 6W SMPS transformer with primary inductance of 43uH. It operates b/w -40 to 85°C, outputting 1600V at max input voltage of 23V. Ideal for surface mount applications up to 100KHz frequency.
POE13W2X12-R
Eaton Corporation
The Eaton Corporation POE13W2X12-R is a 13W SMPS transformer with 2 primary windings and inductance of 100uH. It has an output voltage of 12V, operates b/w -40 to 85°C, and can handle input voltages from 29.5V to 60V. Ideal for surface mount applications with a max frequency of 250KHz.
CTX02-14659-R
CTX02-14659-R by Eaton Corp is a SMPS transformer with inductance of 547uH, suitable for surface mount. It has 2 secondary windings and operates at max frequency of 300KHz. Ideal for compact electronic devices due to its small dimensions of L12.0xB10.0xH6.2mm.
PA1837NL
PA1837NL by Pulse Electronics is a SMPS transformer with 3 primary windings and inductance of 4.5uH. It operates b/w -40 to 130°C, outputs 12V, and supports input voltage range of 9-36V. Ideal for surface mount applications with dimensions L29.21xB21.84xH11.43mm and max frequency of 200KHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PL300-100L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Terminal Finish: MATTE TIN OVER NICKEL; Packing Method: TRAY; JESD-609 Code: e3;
PL300-101L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Length: 29.46 mm; Additional Features: LENGTH DIM INCLUDES TERMINAL ALSO; No. of Winding (Primary): 2;
PL300-102L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Terminal Finish: MATTE TIN OVER NICKEL; No. of Winding (Secondary): 1; Maximum Operating Frequency: 700 KHz;
PL300-103L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Maximum Operating Frequency: 700 KHz; Power Rating: 300 W; Height: 11.4 mm;
PL300X2-100L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Nominal Input Voltage (V): 48; Additional Features: LENGTH DIM INCLUDES TERMINAL ALSO; Packing Method: TRAY;
PL300X2-103L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Nominal Input Voltage (V): 48; Inductance (Primary): 864 uH; No. of Winding (Primary): 2;
PL300X3-100L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Height: 10.4 mm; Minimum Operating Temperature: -40 Cel; Inductance (Primary): 287 uH;
PL300X3-101L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Maximum Operating Temperature: 125 Cel; Minimum Operating Frequency: 200 KHz; Length: 29.46 mm;
PL300X3-103L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; No. of Winding (Secondary): 1; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel;
PL300X4-101L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Maximum Operating Temperature: 125 Cel; Maximum Operating Frequency: 700 KHz; Minimum Operating Temperature: -40 Cel;
PL300X4-104L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Inductance (Primary): 1075 uH; Nominal Input Voltage (V): 48; Minimum Operating Frequency: 200 KHz;
PL300X5-100L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Height: 10.4 mm; Inductance (Primary): 287 uH; Additional Features: LENGTH DIM INCLUDES TERMINAL ALSO;
PL300X5-102L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Nominal Input Voltage (V): 48; Height: 11.4 mm; Packing Method: TRAY;
PL300X7-100L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Length: 29.46 mm; Packing Method: TRAY; Minimum Operating Frequency: 200 KHz;
PL300X9-100L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Width: 26.67 mm; Packing Method: TRAY; Nominal Input Voltage (V): 48;
PL300X9-101L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Width: 26.67 mm; Inductance (Primary): 448 uH; Minimum Operating Frequency: 200 KHz;
PL300X9-102L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Nominal Input Voltage (V): 48; Width: 26.67 mm; No. of Winding (Secondary): 1;
PL300X9-103L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Length: 29.46 mm; Additional Features: LENGTH DIM INCLUDES TERMINAL ALSO; Maximum Operating Temperature: 125 Cel;
PL300-104LB
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Power Rating: 300 W; Maximum Operating Frequency: 700 KHz; Nominal Input Voltage (V): 48; Height: 12.1 mm;
PL300-104LD
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR, EMBOSSED PLASTIC, 13 INCH; No. of Winding (Secondary): 1; Height: 12.1 mm; Maximum Operating Temperature: 120 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved