Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Coilcraft's PL300-102L is a 300W SMPS transformer with 2 primary windings and inductance of 635uH. It operates b/w -40°C to 125°C, suitable for applications requiring a nominal input voltage of 48V. With approvals like AEC-Q200, it is designed for high-frequency operation up to 700KHz in automotive and industrial power supply systems.
Median Price
$15.340
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Coilcraft
1+ parts
$11.640
100+ parts
$9.960
1k+ parts
$7.530
10k+ parts
-
Mouser Electronics
$12.430
$11.530
Newark
$19.300
$13.490
$11.570
Bristol Electronics
$9.000
$6.075
DigiKey Marketplace
$14.550
Vyrian
Nova Conductors
AZTECH Wire
$1.060
$1.020
$1.000
$0.980
Continental Prestige Electronics
$14.640
$7.600
Ampacity Inc.
$21.530
Aranea Global
High power rating allows for efficient operation and the ability to handle heavy loads.
AEC-Q200 approval ensures high reliability and quality standards for automotive applications.
High inductance value helps in reducing electromagnetic interference and ensuring stable operation.
High operating temperature tolerance ensures reliable performance even in harsh environments.
Optimal input voltage rating for efficient energy conversion and power delivery.
SMPS Transformers PL300-102L attributes and parameters. Explore more SMPS Transformers devices from Coilcraft
Additional Features:
Approvals (V):
Height:
Nominal Input Voltage (V):
JESD-609 Code:
Length:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Power Rating:
Inductance (Primary):
Terminal Finish:
Transformer Type:
Width:
PL300-102L Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
Vishay Telefunken
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ETH1-460LD
Coilcraft's ETH1-460LD is a 120W SMPS transformer with 4 primary windings and an inductance of 350uH. It operates b/w -40°C to 85°C, suitable for various power applications. This surface mount transformer is ideal for compact designs requiring high power density.
750311880
Wuerth Elektronik & Kg
Wurth Elektronik 750311880 is a SMPS transformer with inductance of 2.5uH, operating temperature range from -40 to 125°C, and dimensions L9.78xB9.14xH10.54mm. It has two secondary windings for output voltages of 5V each, suitable for applications requiring a min input voltage of 3V and operating frequency b/w 200kHz to 600kHz on surface mount boards.
PA1736NL
Pulse Electronics
PA1736NL by Pulse Electronics is a SMPS transformer with 3 primary windings and inductance of 20.5uH. It operates b/w -40 to 130°C, outputs 12V at max input voltage of 72V, and supports frequencies up to 200 KHz. Ideal for surface mount applications requiring compact dimensions of L29.21xB21.84xH11.43mm.
HA3803-ALD
Coilcraft's HA3803-ALD is a 10W SMPS transformer with primary inductance of 166.5uH, suitable for applications requiring 12V and 6V output voltages. With a compact size of L17.2xB14.98xH8.51mm, it operates b/w -40 to 125°C and can handle input voltages from 24V to 57V at frequencies up to 125KHz, making it ideal for surface mount power supply designs.
750313769
750313769 by Wurth Elektronik is a SMPS Transformer with 340uH primary inductance, 5V output voltage, and -40 to 125°C operating temperature range. Ideal for applications requiring AEC-Q200, CSA, EN, IEC, UL approvals and surface mounting feature.
YA9036-ALD
Coilcraft's YA9036-ALD is a 6W SMPS transformer with primary inductance of 24uH. It has 2 secondary windings, operates b/w -40 to 85°C, and outputs 24V. Ideal for surface mount applications in power supplies with input voltage range of 4-65V.
YA8916-BLD
Coilcraft's YA8916-BLD is a SMPS transformer with 4.6W power rating, 30uH primary inductance, and 2 secondary windings. Ideal for applications requiring 15V and 8V output voltages, it operates b/w -40°C to 85°C temperatures at frequencies up to 350KHz. Suitable for surface mounting method in compact designs.
MA5597-AL
Coilcraft's MA5597-AL is a 6W SMPS transformer with 2 primary windings, 2.22uH inductance, and 12V output voltage. Ideal for applications requiring a min input voltage of 85V and max input voltage of 265V. Through-hole mounted design with dimensions of 27.94mm x 24.13mm x 27.94mm.
C1173-ALB
Coilcraft C1173-ALB is a SMPS transformer with 2 primary windings and 3 secondary windings. It offers an inductance of 166.5 uH, operates b/w -40 to 125 °C, and has dimensions of L17.20xB14.98xH8.51 mm. Ideal for applications requiring an output voltage of 3.3 V, max input voltage of 72 V, and operating frequency up to 500 KHz in surface mount setups.
750312367
750312367 by Wurth Elektronik is a SMPS Transformer with inductance of 300uH, output voltage of 3.3V, and operating temperature range from -40 to 125°C. Ideal for applications requiring surface mounting feature and IEC approvals.
POE13W2X12-R
Cooper Industries
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: POE13W2X12-R; Width: 18 mm; Height: 10 mm; Power Rating: 13 W;
POE120PL-12L
Coilcraft's POE120PL-12L is a 120W SMPS transformer with primary inductance of 50uH. It operates b/w -40°C to 125°C, suitable for AEC-Q200 approved applications. With output voltage of 12V, it is designed for surface mounting in various power supply systems.
MTPL-2516-S15V
Vishay Intertechnology
MTPL-2516-S15V by Vishay Intertechnology is a 3W SMPS transformer with 2 primary and secondary windings, inductance of 450uH, and output voltage of 15V. Approved for MIL-PRF-27, it operates b/w -55°C to 130°C, suitable for applications requiring a max input voltage of 380V at frequencies ranging from 100kHz to 500kHz.
34541
Pico Electronics
SMPS TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNT; Approvals (V): MIL-PRF-27; Terminal Finish: Tin/Lead (Sn/Pb); Length: 12.7 mm; Minimum Operating Temperature: -55 Cel;
PA5130.003NLT
PA5130.003NLT by Pulse Electronics is a 25W SMPS transformer with 2 primary windings and an inductance of 80uH. It has a max operating temperature of 125°C and is suitable for applications requiring a min input voltage of 33V, such as power supplies and converters.
PH0814CNL
PH0814CNL by Pulse Electronics is a 160W SMPS Transformer with 3 primary windings and inductance of 275uH. It operates b/w -40 to 125°C, suitable for high-frequency applications (200-700 KHz) requiring surface mounting. With dimensions of 24.65x21.59x10.1mm, it's ideal for compact power supply designs.
JA4429-AL
Coilcraft's JA4429-AL SMPS Transformer offers 24W power rating, 400uH primary inductance, and 24V output voltage. Ideal for applications requiring a compact transformer with through-hole mounting, operating b/w -40°C to 85°C temperature range.
LDT565630T-002
TDK
TDK's LDT565630T-002 is a SMPS transformer with primary inductance of 14.5uH, dimensions of L5.8xB5.6xH3 (mm), and surface mounting feature. Ideal for power supply applications due to its compact size and efficient performance in various electronic devices.
C1588-ALD
Coilcraft's C1588-ALD is a 7W SMPS transformer with primary inductance of 155uH. It has two secondary windings, output voltage of 5V, and operates b/w -40 to 85°C. Ideal for surface mount applications with max input voltage of 72V and frequency up to 250KHz.
PA6383-ALD
Coilcraft's PA6383-ALD is a 5W SMPS transformer with primary inductance of 29.7uH, suitable for surface mounting. It has two windings each for primary and secondary, operating b/w -40°C to 85°C. Ideal for applications requiring a 5V output voltage at nominal input of 5V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PL300-100L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Terminal Finish: MATTE TIN OVER NICKEL; Packing Method: TRAY; JESD-609 Code: e3;
PL300-104L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Power Rating: 300 W; Additional Features: LENGTH DIM INCLUDES TERMINAL ALSO; Nominal Input Voltage (V): 48;
PL300-101L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Length: 29.46 mm; Additional Features: LENGTH DIM INCLUDES TERMINAL ALSO; No. of Winding (Primary): 2;
PL300-103L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Maximum Operating Frequency: 700 KHz; Power Rating: 300 W; Height: 11.4 mm;
PL300X2-103L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Nominal Input Voltage (V): 48; Inductance (Primary): 864 uH; No. of Winding (Primary): 2;
PL300X3-100L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Height: 10.4 mm; Minimum Operating Temperature: -40 Cel; Inductance (Primary): 287 uH;
PL300X3-101L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Maximum Operating Temperature: 125 Cel; Minimum Operating Frequency: 200 KHz; Length: 29.46 mm;
PL300X3-102L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Height: 11.4 mm; Maximum Operating Frequency: 700 KHz; Power Rating: 300 W;
PL300X4-100L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; No. of Winding (Primary): 2; Maximum Operating Temperature: 125 Cel; Additional Features: LENGTH DIM INCLUDES TERMINAL ALSO;
PL300X4-102L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Power Rating: 300 W; No. of Winding (Secondary): 1; No. of Winding (Primary): 2;
PL300X4-103L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Nominal Input Voltage (V): 48; Height: 11.4 mm; Power Rating: 300 W;
PL300X4-104L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Inductance (Primary): 1075 uH; Nominal Input Voltage (V): 48; Minimum Operating Frequency: 200 KHz;
PL300X5-100L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Height: 10.4 mm; Inductance (Primary): 287 uH; Additional Features: LENGTH DIM INCLUDES TERMINAL ALSO;
PL300X5-104L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Power Rating: 300 W; No. of Winding (Secondary): 1; Packing Method: TRAY;
PL300X7-100L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Length: 29.46 mm; Packing Method: TRAY; Minimum Operating Frequency: 200 KHz;
PL300X7-101L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Power Rating: 300 W; Length: 29.46 mm; Minimum Operating Temperature: -40 Cel;
PL300X7-103L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Minimum Operating Temperature: -40 Cel; Packing Method: TRAY; Power Rating: 300 W;
PL300X9-100L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Width: 26.67 mm; Packing Method: TRAY; Nominal Input Voltage (V): 48;
PL300X9-101L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Width: 26.67 mm; Inductance (Primary): 448 uH; Minimum Operating Frequency: 200 KHz;
PL300X9-102L
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Nominal Input Voltage (V): 48; Width: 26.67 mm; No. of Winding (Secondary): 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved