Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Height: 10.5 mm; Type (Primary): WOUND PRIMARY; Packing Method: TR, EMBOSSED PLASTIC, 13 INCH;
Median Price
$4.575
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
< 1k
Coilcraft
1+ parts
$2.120
100+ parts
-
1k+ parts
$1.590
10k+ parts
$1.080
Farnell
$4.290
$3.030
$2.710
Mouser Electronics
$4.860
$2.220
Element14
$6.950
$5.300
$4.880
$3.110
Current Sense Transformers CST2010-150LD attributes and parameters. Explore more Current Sense Transformers devices from Coilcraft
Approvals (V):
Minimum ET Product:
Height:
Length:
Load Resistance:
Mounting Feature:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Primary Current (Peak):
Type (Primary):
Inductance (Secondary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
CST2010-150LD Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Headquartered in Cary, IL, Coilcraft has been a leader in the design, manufacture and distribution of high-performance magnetic components including RF chip inductors, power magnetics and filters since 1945. In addition to the industry’s largest selection of standard, off-the-shelf components, we also design and build custom magnetics to meet your precise requirements
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-7-F
Multicomp Pro
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
General Semiconductor
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
749251060
Wuerth Elektronik & Kg
749251060 by Wurth Elektronik is a WOUND PRIMARY current sense transformer with an isolation voltage of 500V and inductance of 720uH. It has a primary current peak of 20A, output current of 10A, and dimensions L7.7xB6.9xH5.33 (mm). Ideal for POWER applications, it operates b/w -40 to 125 °C with a max frequency of 1000 KHz.
AS-101
Nuvotem Talema
AS-101 by Nuvotem Talema is a BAR PRIMARY current sense transformer with inductance of 25000 uH. It operates b/w -40 to 120 °C and has a turns ratio of 1:100. Ideal for applications requiring precise current sensing at frequencies ranging from 20 KHz to 200 KHz.
PE-67100NL
PE-67100NL by Pulse Electronics is a WOUND PRIMARY current sense transformer with VDE approval. It has a peak primary current of 37A, inductance of 20000uH, and operates b/w -40 to 130 °C. Ideal for POWER applications, it measures L19.05xB14.35xH19.05mm and supports frequencies from 10KHz to 200KHz.
CU8965-ALD
CU8965-ALD by Coilcraft is a WOUND PRIMARY current sense transformer with 20A peak primary current, 1330uH secondary inductance, and 1:100 turns ratio. Ideal for AEC-Q200 approved applications requiring high accuracy current sensing at temperatures ranging from -40 to 125°C.
5311
Api Technologies
CURRENT SENSE TRANSFORMER;
CST2010-200LD
CST2010-200LD by Coilcraft is a WOUND PRIMARY current sense transformer with 1:200 turns ratio. It has a peak primary current of 47A and inductance of 34000uH. Ideal for applications requiring high accuracy current sensing at temperatures ranging from -40 to 125°C.
P8204
Pulse Electronics P8204 is a WOUND PRIMARY current sense transformer with 10A peak primary current. It has dimensions of L8.38XB7.21XH5.5 (mm) and inductance of 320uH, suitable for surface mount applications in circuits requiring precise current sensing up to 1000KHz frequency range.
53070C
C&d Technologies
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 5300; Terminal Finish: Tin (Sn); Turns Ratio (Np:Ns): 1:70; Additional Features: LENGTH & HEIGHT DIM INCLUDE TERMINAL ALSO;
CS4200V-01L
CS4200V-01L by Coilcraft is a WOUND PRIMARY current sense transformer with UL approval. It has a primary peak current of 35A, inductance of 80000uH, and operates b/w -40 to 85°C. Ideal for applications requiring precise current sensing at frequencies up to 1MHz.
749251030
749251030 by Wurth Elektronik is a WOUND PRIMARY current sense transformer with an isolation voltage of 500V and inductance of 180uH. It is designed for POWER applications, offering a peak primary current of 20A and output current of 10A. With dimensions L7.7xB6.9xH5.33 (mm), it operates b/w -40 to 125 °C and has a turns ratio of 1:30 at a max frequency of 1000 KHz.
PE-63619NL
PE-63619NL by Pulse Electronics is a WOUND PRIMARY current sense transformer with VDE approval. It offers inductance of 80000 uH, load resistance of 4.5 ohm, and operates b/w -40 to 125 °C. Ideal for through hole mounting applications in various electronic devices.
CR8350-2000
Cr Magnetics
CR8350-2000 by Cr Magnetics is a BAR PRIMARY current sense transformer with 800A peak primary current. Operating temperature ranges from -40 to 85°C, suitable for 0.02-1 KHz frequency applications. Through hole mounted, it measures 39x14x37.5mm and is ideal for various industrial monitoring systems.
53040C
Murata Manufacturing
Murata Manufacturing's 53040C is a WOUND PRIMARY current sense transformer with 10A peak primary current. Measuring 5.4mm in height, 7.2mm in width, and 8.3mm in length, it has a turns ratio of 1:40 and load resistance of 1.1Ω. Ideal for surface mount applications requiring precise current sensing capabilities.
53100C
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 5300; Terminal Finish: Tin (Sn); Minimum Operating Temperature: -40 Cel; Type (Primary): WOUND PRIMARY;
PA0368.050NLT
PA0368.050NLT by Pulse Electronics is a WOUND PRIMARY current sense transformer with 4A peak primary current and 1700uH secondary inductance. It operates b/w -40 to 130°C, suitable for surface mount applications at frequencies ranging from 50kHz to 1MHz.
CS4050V-01L
CS4050V-01L by Coilcraft is a WOUND PRIMARY current sense transformer with 35A peak primary current. It has an inductance of 5000uH and operates b/w -40 to 85°C. Ideal for applications requiring precise current sensing at frequencies ranging from 3KHz to 1MHz.
B82801B0984A070
TDK
The TDK B82801B0984A070 is a WOUND PRIMARY current sense transformer with 20A peak primary current and 980uH secondary inductance. Ideal for applications requiring precise current sensing at frequencies ranging from 50kHz to 1MHz, it features a compact size of L8.38xB7.11xH5.08mm and can operate b/w -40°C to 125°C temperatures.
CR8348-2000
CR8348-2000 by Cr Magnetics is a BAR PRIMARY current sense transformer with 50A peak primary current. It operates b/w -40 to 85°C, suitable for applications requiring through hole mounting and load resistance of 106Ω. Approved by CUL and UL, it functions at frequencies from 0.02 to 1 KHz.
749251070
749251070 by Wurth Elektronik is a WOUND PRIMARY current sense transformer with 500V isolation voltage and 980uH inductance. Ideal for POWER applications, it has a peak primary current of 20A, output current of 10A, and operates b/w -40 to 125°C temperatures.
P8208NLT
Pulse Electronics P8208NLT is a WOUND PRIMARY current sense transformer with 10A peak primary current. It has inductance of 2000uH, operates b/w -40 to 130°C, and supports frequencies from 20kHz to 1MHz. Ideal for surface mount applications in electronic circuits requiring precise current sensing.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved