Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Pulse Electronics P8208NL is a WOUND PRIMARY current sense transformer with 10A peak primary current. It has dimensions of L8.38XB7.21XH5.5 (mm) and inductance of 2000uH, suitable for surface mount applications measuring load resistance up to 5.5 ohm at frequencies ranging from 20KHz to 1000KHz.
Median Price
$2.320
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$1.957
1k+ parts
$1.750
10k+ parts
$1.587
Master Electronics
$4.050
$1.320
$1.260
$1.240
TTI
-
$1.640
$1.510
$1.480
Nova Conductors
$1.299
Zilex Electronics Inc.
Martec Srl
Bristol Electronics
PAR Electronics
Vyrian
Prism Electronics
Sogenti Electronics
ComSIT Distribution GmbH
Continental Prestige Electronics
$1.273
Argo Parts USA
Bastille Electronics
$1.234
$1.172
$1.156
Aztec Data Supply Inc.
$4.060
Corohmni
$6.210
Perfect Parts
Assy Fe
Akira Global LLC
Wound primary type ensures reliable performance and accurate current sensing.
High peak current capacity of 10 A allows for measuring larger currents accurately.
Compact size makes it suitable for small electronic devices.
Wide operating temperature range up to 130°C ensures stability in various environments.
High inductance in the secondary winding enables accurate measurement of current.
Can operate in extreme low temperature conditions down to -40°C.
Matte tin finish provides good conductivity and solderability for ease of installation.
Optimal load resistance for efficient current sensing and minimal signal loss.
Works effectively at a minimum frequency of 20 KHz for various applications.
Surface mount design for easy and secure installation on PCBs.
High turns ratio of 1:100 provides accurate current measurement and signal amplification.
Capable of operating at high frequencies up to 1000 KHz for fast response times.
Current Sense Transformers P8208NL attributes and parameters. Explore more Current Sense Transformers devices from Pulse Electronics
Additional Features:
Height:
JESD-609 Code:
Length:
Load Resistance:
Mounting Feature:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Primary Current (Peak):
Dimensions:
Type (Primary):
Inductance (Secondary):
Terminal Finish:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
P8208NL Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - ACME P47 19/Jan/2018
PCN Assembly/Origin - Mult Devs Location 14/Jan/2023
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Sangdest Microelectronics (Nanjing)
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Allegro MicroSystems
Crimson Semiconductor
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
B82801B0984A070
TDK
The TDK B82801B0984A070 is a WOUND PRIMARY current sense transformer with 20A peak primary current and 980uH secondary inductance. Ideal for applications requiring precise current sensing at frequencies ranging from 50kHz to 1MHz, it features a compact size of L8.38xB7.11xH5.08mm and can operate b/w -40°C to 125°C temperatures.
PA0368.125NLT
Pulse Electronics
PA0368.125NLT by Pulse Electronics is a WOUND PRIMARY current sense transformer with 1:125 turns ratio. It operates b/w -40 to 130 °C at frequencies up to 1 MHz, ideal for surface mount applications in measuring currents up to 4A accurately.
749251070
Wuerth Elektronik & Kg
749251070 by Wurth Elektronik is a WOUND PRIMARY current sense transformer with 500V isolation voltage and 980uH inductance. Ideal for POWER applications, it has a peak primary current of 20A, output current of 10A, and operates b/w -40 to 125°C temperatures.
5303
Amecon
CURRENT TRANSFORMER; Mounting Feature: PCB MOUNT; Length: .931 mm; Type (Primary): BAR PRIMARY; Primary Current (Peak): 15 A; Turns Ratio (Np:Ns): 1000:1;
PE-63588NL
PE-63588NL by Pulse Electronics is a wound primary current sense transformer with 3750V isolation voltage. It has a max DC unbalance current of 20A and inductance of 80mH. Ideal for power applications, it operates b/w -40°C to 125°C and features through-hole mounting at L22.86xB17.78xH17.78mm dimensions.
PE-68280NLT
PE-68280NLT by Pulse Electronics is a WOUND PRIMARY current sense transformer with 15A peak primary current. It has dimensions of L12.57xB12.45xH7.11 (mm) and inductance of 14800uH, suitable for surface mount applications at temperatures ranging from -40 to 130 °C.
5311
Api Technologies
CURRENT SENSE TRANSFORMER;
53070C
Murata Manufacturing
Murata Manufacturing's 53070C is a WOUND PRIMARY current sense transformer with peak primary current of 10A. Measuring 5.4mm in height, 7.2mm in width, and 8.3mm in length, it has load resistance of 4.5Ω. Ideal for surface mount applications requiring precise current sensing capabilities.
54050C
C&d Technologies
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 5400; Terminal Finish: Tin (Sn); Maximum Operating Frequency: 500 KHz; Packing Method: TAPE & REEL;
5352
5352 by Api Technologies is a BAR PRIMARY type current sense transformer with peak primary current of 10A. It has dimensions of 26.924mm x 14.224mm and nominal input voltage of 1.41V, suitable for applications requiring precise current sensing in circuits up to 100KHz frequency range.
P8224
P8224 by Pulse Electronics is a WOUND PRIMARY current sense transformer with 10A peak primary current. It has dimensions of L8.38XB7.21XH4.83 (mm) and inductance of 320uH, suitable for surface mount applications in circuits operating b/w -40 to 130 °C at frequencies from 50 KHz to 1000 KHz.
56T200C
Murata Manufacturing's 56T200C is a BAR PRIMARY type current sense transformer with peak primary current of 10A. It has dimensions of 20.19mm x 8.89mm x 16.79mm and load resistance of 2.81Ω, suitable for through hole mounting applications in various electronic devices.
PA0368.100NLT
PA0368.100NLT by Pulse Electronics is a WOUND PRIMARY current sense transformer with 1:100 turns ratio. It operates b/w -40 to 130°C, suitable for applications requiring peak primary current of 4A. With dimensions L8.25xB7.25xH3.15 (mm), it's ideal for surface mount PCB designs at frequencies up to 1MHz.
56050C
Murata Manufacturing's 56050C is a BAR PRIMARY current sense transformer with peak primary current of 10A. It features dimensions of 20.19mm x 8.89mm x 16.79mm and load resistance of 0.199Ω, suitable for THROUGH HOLE MOUNTED applications in various electronic devices.
CST4835-150EB
Coilcraft
Coilcraft's CST4835-150EB is a WOUND PRIMARY current sense transformer with AEC-Q200 approval. It has a primary peak current of 7A, inductance of 1800uH, and operates b/w -40 to 125°C. Ideal for applications requiring precise current sensing in automotive electronics due to its compact size and high-frequency capabilities up to 1MHz.
CS4050V-01L
CS4050V-01L by Coilcraft is a WOUND PRIMARY current sense transformer with 35A peak primary current. It has an inductance of 5000uH and operates b/w -40 to 85°C. Ideal for applications requiring precise current sensing at frequencies ranging from 3KHz to 1MHz.
AS-101
Nuvotem Talema
AS-101 by Nuvotem Talema is a BAR PRIMARY current sense transformer with inductance of 25000 uH. It operates b/w -40 to 120 °C and has a turns ratio of 1:100. Ideal for applications requiring precise current sensing at frequencies ranging from 20 KHz to 200 KHz.
CR8320-1600
Cr Magnetics
CR8320-1600 by Cr Magnetics is a BAR PRIMARY current sense transformer with 10A peak primary current. It operates b/w -40 to 85°C, suitable for applications requiring through hole mounting and frequency range of 0.02KHz to 1KHz. Approved by CUL and UL, it has dimensions of 19.5mm x 8.2mm x 19.4mm, with load resistance of 95 ohm.
CR8348-2000-D
CR8348-2000-D by Cr Magnetics is a BAR PRIMARY current sense transformer with 50A peak primary current. It has approvals from CUL and UL, operates at frequencies b/w 0.02 KHz to 1 KHz, and features through-hole mounting. Ideal for applications requiring precise current sensing in compact spaces.
CST-1020
Triad Magnetics
CST-1020 by Triad Magnetics is a BAR PRIMARY current sense transformer with 20A peak primary current and 20000mA max DC unbalance current. It has dimensions of L23.5xB12.0xH24.8 (mm) and is ideal for SIGNAL applications at a nominal operating frequency of 50/60Hz. The transformer features a turns ratio of 1000:1, THROUGH HOLE MOUNTED mounting feature, and operates within a frequency range of 0.05-0.06 KHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
P8208NLT
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Load Resistance: 5.5 ohm; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 20 KHz;
P8204
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: P8204; Type (Primary): WOUND PRIMARY; Height: 5.5 mm; Length: 8.38 mm;
P8204T
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: P8204; Type (Primary): WOUND PRIMARY; Minimum Operating Temperature: -40 Cel; Height: 5.5 mm;
P8208T
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: P8208; Turns Ratio (Np:Ns): 1:100; Length: 8.38 mm; Additional Features: LENGTH, WIDTH AND HEIGHT DIMENSION INCLUDES TERMINAL ALSO;
P8208
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: P8208; Minimum Operating Temperature: -40 Cel; Type (Primary): WOUND PRIMARY; Width: 7.21 mm;
P8202NL
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 130 Cel; Inductance (Secondary): 80 uH; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 20 KHz;
P8202NLT
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Type (Primary): WOUND PRIMARY; Length: 8.38 mm; Minimum Operating Frequency: 20 KHz;
P8203NL
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Packing Method: TRAY; Primary Current (Peak): 10 A; Height: 5.5 mm;
P8203NLT
Pulse Electronics P8203NLT is a WOUND PRIMARY current sense transformer with 10A peak primary current. It has dimensions of L8.38XB7.21XH5.5 (mm) and inductance of 180uH, suitable for surface mount applications in circuits operating b/w -40 to 130 °C at frequencies up to 1MHz.
P8204NL
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 130 Cel; Packing Method: TRAY; Height: 5.5 mm; Primary Current (Peak): 10 A;
P8204NLT
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 5.5 mm; Inductance (Secondary): 320 uH; Minimum Operating Frequency: 20 KHz; Dimensions: L8.38XB7.21XH5.5 (mm);
P8205NL
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Frequency: 1000 KHz; Type (Primary): WOUND PRIMARY; Primary Current (Peak): 10 A; Packing Method: TRAY;
P8205NLT
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 7.21 mm; Load Resistance: 1.5 ohm; Primary Current (Peak): 10 A; Turns Ratio (Np:Ns): 1:50;
P8206NL
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Inductance (Secondary): 720 uH; Width: 7.21 mm; Packing Method: TRAY; Type (Primary): WOUND PRIMARY;
P8206NLT
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Additional Features: LENGTH, WIDTH AND HEIGHT DIMENSION INCLUDES TERMINAL ALSO; Dimensions: L8.38XB7.21XH5.5 (mm); Turns Ratio (Np:Ns): 1:60; Minimum Operating Frequency: 20 KHz;
P8207NL
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Additional Features: LENGTH, WIDTH AND HEIGHT DIMENSION INCLUDES TERMINAL ALSO; Width: 7.21 mm; Maximum Operating Frequency: 1000 KHz; Minimum Operating Frequency: 20 KHz;
P8207NLT
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 130 Cel; Primary Current (Peak): 10 A; Height: 5.5 mm; Length: 8.38 mm;
P8209NL
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TRAY; Maximum Operating Temperature: 130 Cel; Length: 8.38 mm; Height: 5.5 mm;
P8209NLT
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Primary Current (Peak): 10 A; Maximum Operating Temperature: 130 Cel; Dimensions: L8.38XB7.21XH4.83 (mm); Height: 5.5 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved