Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Frequency: 1200 MHz; Maximum Control Voltage: 20 V; Maximum Operating Frequency: 2000 MHz; Offset Frequency: 50 kHz;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Electronic Expediters
Decca Corp
$15.000
$14.700
$14.553
Supply Digital
Corphita
VCO Voltage Controlled Oscillators VTO-9120 attributes and parameters. Explore more VCO Voltage Controlled Oscillators devices from Broadcom
Maximum Control Voltage:
Minimum Control Voltage:
Mounting Feature:
Offset Frequency:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Power:
Phase Noise:
Physical Dimension:
Power Variation:
Maximum Supply Current:
Nominal Supply Voltage:
VTO-9120 Oscillators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
HMC385LP4ETR
Analog Devices
Analog Devices' HMC385LP4ETR is a VCO with 24 terminals, operating from 2250 MHz to 2500 MHz. It offers -115 dBc/Hz phase noise and 4.5 dBm output power, suitable for applications requiring precise frequency control in the range of -40°C to 85°C. The device comes in a compact 4.1mm x 4.1mm x 1.0mm plastic/epoxy package for surface mount assembly.
HMC6633LC4B
Voltage Controlled Oscillators;
LTC6992CS6-4#TRPBF
LTC6992CS6-4#TRPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a supply voltage range of 2.25V to 5.5V and consumes only 0.45 mA max current, making it suitable for applications requiring precise voltage-controlled oscillation in compact designs. The package body material is PLASTIC/EPOXY, ideal for surface mounting features in various temperature environments up to 70°C.
HMC511LP5TR
Analog Devices' HMC511LP5TR is a VCO with 5.25V max supply voltage, 300mA max supply current, and 9dBm output power. Ideal for applications requiring precise frequency control in the range of 9050-10150MHz, such as wireless communication systems or radar equipment.
MAX2622EUA+
Analog Devices' MAX2622EUA+ is a VCO with -101 dBc/Hz phase noise, 11.5 mA supply current, and -8 dBm output power. Ideal for applications requiring a voltage-controlled oscillator in the frequency range of 855-881 MHz.
HMC358MS8GE
Analog Devices' HMC358MS8GE is a VCO with 6800 MHz operating frequency, -110 dBc/Hz phase noise, and 8 dBm output power. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
MAOC-009264-TR0500
TE Connectivity
TE Connectivity's MAOC-009264-TR0500 VCO offers 10.5 dBm output power, -90 dBc/Hz phase noise, and operates at 8800-9800 MHz frequencies. Ideal for applications requiring precise voltage-controlled oscillation in compact designs with a supply voltage of 5V.
HMC732LC4B
Hittite Microwave
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Minimum Control Voltage: 0 V; Package Equivalence Code: LCC24,.16SQ,20; Offset Frequency: 10 kHz;
HMC384LP4TR
Analog Devices' HMC384LP4TR is a VCO with 3.25V max supply voltage, -112 dBc/Hz phase noise, and 3.5 dBm output power. Ideal for applications requiring a voltage-controlled oscillator in the frequency range of 2050-2250 MHz, such as wireless communication systems or radar applications.
HMC515LP5ETR
Analog Devices' HMC515LP5ETR is a VCO with 5.25V max supply voltage, 240mA max supply current, and 6dBm output power. Ideal for applications requiring precise frequency control in the range of 11.5-12.5GHz, it offers -110dBc/Hz phase noise and operates b/w -40 to 85°C temperatures.
LTC6990IS6#WTRMPBF
LTC6990IS6#WTRMPBF by Analog Devices is a VCO with 2-5.5V supply, 0.283mA current, and 2MHz frequency range. Ideal for AEC-Q100 applications in automotive electronics due to its CMOS technology and compact 2.9mm x 1.75mm x 1.0mm size for surface mounting.
LTC6992IS6-2#WTRPBF
LTC6992IS6-2#WTRPBF by Analog Devices is a VCO with 6 terminals, operating from -40 to 85°C. It has a control voltage range of 0.1V to 0.9V and operates b/w 0.00000318 MHz to 1 MHz, making it suitable for various frequency-controlled applications in automotive and industrial settings.
MTO-8002
Broadcom
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Phase Noise: -109 dBc/Hz; Physical Dimension: 12.7mm x 5.08mm; Nominal Supply Voltage: 15 V;
MAOC-009267-PKG003
M/a-com Technology Solutions
MAOC-009267-PKG003 by M/a-com Technology Solutions is a VCO with 165mA supply current, 3.5dBm output power, and -80dBc/Hz phase noise. It operates b/w 11200-12600MHz frequencies and has a compact size of 5.0mm x 5.0mm x 0.9mm, making it ideal for applications requiring precise frequency control in RF systems.
SN74LS626N1
Texas Instruments
SN74LS626N1 by Texas Instruments is a TTL VCO with a 5V supply voltage. It operates b/w 0-70°C, featuring a voltage-controlled oscillator type. Ideal for applications requiring through-hole mounting in various electronic devices.
LTC6992HDCB-3#TRMPBF
LTC6992HDCB-3#TRMPBF by Analog Devices is a VCO with 6 terminals, operating from -40 to 125°C. It has a supply voltage range of 2.25V to 5.5V and operates b/w 0.00000318 MHz to 1 MHz. Ideal for applications requiring precise voltage-controlled oscillation in compact surface-mount designs.
HMC514LP5TR
Analog Devices' HMC514LP5TR is a VCO with 3.25V max supply voltage, 290mA max supply current, and 5dBm output power. Ideal for applications requiring precise frequency control in the range of 11.17-12.02GHz, such as radar systems and communication equipment.
HMC431LP4ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Terminal Finish: Matte Tin (Sn); Additional Features: TAPE AND REEL; Maximum Supply Current: 27 mA;
LTC6990IDCB#TRPBF
LTC6990IDCB#TRPBF by Analog Devices is a VCO with max supply voltage of 5.5V, current of 0.283mA, and operating frequency range from 0.000488 MHz to 2 MHz. Ideal for applications requiring digital tuned oscillators in compact designs with surface mounting feature.
ROS-2150VW
Mini-circuits
Mini-circuits ROS-2150VW VCO features 2150 MHz operating frequency, -70 dBc/Hz phase noise, and 4 dBm output power. Ideal for applications requiring precise voltage control oscillation in a compact 12.7mm x 12.7mm package with modulation sensitivity of 70 MHz/V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VTO-9032
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; Maximum Supply Current: 50 mA; Phase Noise: -95 dBc/Hz; Physical Dimension: 12.7mm x 5.08mm; Minimum Control Voltage: 0 V;
VTO-9068
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; Maximum Supply Current: 50 mA; Minimum Operating Temperature: 0 Cel; Output Power: 10 dBm; Minimum Control Voltage: 0 V;
VTO-9130
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; Output Power: 10 dBm; Maximum Operating Frequency: 2300 MHz; Minimum Operating Frequency: 1300 MHz; Maximum Operating Temperature: 65 Cel;
VTO-9050R
Hewlett Packard
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 8; Nominal Supply Voltage: 15 V; Maximum Supply Current: 50 mA; Physical Dimension: 12.7mm x 4.572mm;
VTO-9068R
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 8; Phase Noise: -95 dBc/Hz; Minimum Operating Temperature: 0 Cel; Maximum Control Voltage: 20 V;
VTO-9120R
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Minimum Operating Frequency: 1200 MHz; Offset Frequency: 50 kHz; Output Power: 10 dBm;
VTO-9130R
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Maximum Operating Temperature: 65 Cel; Output Power: 10 dBm; Nominal Supply Voltage: 15 V;
Avantek
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Output Power: 10 dBm; Maximum Control Voltage: 20 V; Nominal Supply Voltage: 15 V;
VTO-9050
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Output Power: 10 dBm; Maximum Operating Temperature: 65 Cel; Minimum Operating Temperature: 0 Cel;
VTO-9120
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Minimum Operating Frequency: 1200 MHz; Phase Noise: -97 dBc/Hz; Physical Dimension: 12.7mm x 4.318mm;
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Phase Noise: -97 dBc/Hz; Physical Dimension: 12.7mm x 4.318mm; Nominal Supply Voltage: 15 V;
VTO-9140
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Minimum Operating Temperature: 0 Cel; Maximum Control Voltage: 20 V; Minimum Control Voltage: 2 V;
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Output Power: 10 dBm; Maximum Supply Current: 50 mA; Nominal Operating Frequency: 1360 MHz;
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Maximum Operating Frequency: 2000 MHz; Power Supplies (V): 15; JESD-609 Code: e0;
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Output Power: 10 dBm; JESD-609 Code: e0; Minimum Control Voltage: 2 V;
Agilent Technologies
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Minimum Operating Frequency: 500 MHz; Physical Dimension: 12.7mm x 5.08mm; Power Supplies (V): 15;
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Phase Noise: -95 dBc/Hz; Nominal Operating Frequency: 1360 MHz; Package Equivalence Code: CAN4,.3;
VTO-9090
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Nominal Operating Frequency: 1600 MHz; Phase Noise: -100 dBc/Hz; JESD-609 Code: e0;
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Nominal Supply Voltage: 15 V; Qualification: Not Qualified; Minimum Operating Temperature: 0 Cel;
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Minimum Control Voltage: 2 V; Minimum Operating Frequency: 1300 MHz; Nominal Operating Frequency: 2300 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved