Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAOC-009872-TR0500 by M/a-com Tech: VCO with 5.25V max supply, 190 MHz/V modulation sensitivity, and -83 dBc/Hz phase noise. Ideal for RF applications requiring precise frequency control in the 11-12 GHz range.
Median Price
$25.400
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Richardson RFPD
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Vyrian
Nova Conductors
Corohmni
$2.369
AZTECH Wire
$9.670
Netroflash
Having a high maximum supply voltage allows for flexibility in power supply options and can help prevent damage in case of voltage spikes.
High modulation sensitivity means that small changes in control voltage can result in significant frequency shifts, providing precise control over the oscillator.
Moderate supply current requirement allows for efficient power usage and can help in designing power-efficient systems.
Decent output power level suitable for various applications without requiring additional amplification stages.
Low phase noise ensures clean signal output and is important for applications where signal integrity is crucial.
Being a voltage-controlled oscillator allows for precise frequency control and modulation, making it suitable for applications requiring frequency agility.
Compact size makes it suitable for applications where space is limited and allows for easy integration into circuit designs.
Wide operating temperature range ensures reliable performance in varying environmental conditions.
Low minimum control voltage allows for precise control and modulation of the oscillator.
High maximum control voltage range provides flexibility in modulation options and allows for wide frequency tuning range.
Surface mount design allows for easy integration onto PCBs and simplifies manufacturing processes.
VCO Voltage Controlled Oscillators MAOC-009872-TR0500 attributes and parameters. Explore more VCO Voltage Controlled Oscillators devices from M/a-com Technology Solutions
Additional Features:
Maximum Control Voltage:
Minimum Control Voltage:
JESD-609 Code:
Modulation Sensitivity:
Mounting Feature:
No. of Terminals:
Offset Frequency:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Power:
Phase Noise:
Physical Dimension:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Terminal Finish:
MACOM designs and manufactures high-performance semiconductor products for the Telecommunications, Industrial and Defense and Datacenter industries. MACOM services over 6,000 customers annually with a broad product portfolio that incorporates RF, Microwave, Analog and Mixed Signal and Optical semiconductor technologies. MACOM has achieved certification to the IATF16949 automotive standard, the ISO9001 international quality standard and the ISO14001 environmental management standard. MACOM has more than 70 years of application expertise with multiple design centers, Si, GaAs and InP fabrication, manufacturing, assembly and test, and operates facilities throughout the United States, Europe, and Asia.
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
CRCW06031K00FKEAHP
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
STM32H753ZIT6
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
Surge Components
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ST3485EBDR
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC6990CS6#PBF
Analog Devices
LTC6990CS6#PBF by Analog Devices is a VCO with 6 terminals, operating from 2.25V to 5.5V, consuming 0.283mA max current. It offers a frequency range of 0.000488MHz to 2MHz and is ideal for digital tuned oscillator applications in various electronic devices.
VTO-8360
Broadcom
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; Nominal Supply Voltage: 15 V; Minimum Control Voltage: 6 V; Phase Noise: -100 dBc/Hz; Power Variation: 1.5 dB;
MAX2750EUA-T
Maxim Integrated
MAX2750EUA-T by Maxim Integrated is a VCO with Mod Sensitivity of 140 MHz/V, -3 dBm Output Power, and -125 dBc/Hz Phase Noise. Ideal for applications requiring precise frequency control in the range of 2400-2500 MHz.
SNC54LS324J
VOLTAGE CONTROLLED OSCILLATOR;
HTO-4000
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Phase Noise: -80 dBc/Hz; Qualification: Not Qualified; Minimum Control Voltage: .5 V;
SN74LS624NE4
SN74LS624NE4 by Texas Instruments is a VCO with 14 terminals, operating b/w -55°C to 125°C. It has a supply voltage range of 4.5V to 5.5V and operates at frequencies from 0.000001 MHz to 20 MHz. Ideal for applications requiring precise voltage-controlled oscillation in various temperature conditions.
LTC6992IDCB-3#TRMPBF
Analog Devices' LTC6992IDCB-3#TRMPBF is a VCO with 6 terminals, operating from -40 to 85°C. It has a supply voltage range of 2.25V to 5.5V and control voltage range of 0.1V to 0.9V, making it suitable for applications requiring precise frequency control in compact designs.
LTC6990HDCB#PBF
LTC6990HDCB#PBF by Analog Devices is a VCO with max supply voltage of 5.5V and current of 0.283mA. It operates b/w -40°C to 125°C, with min freq of 0.000488MHz and max freq of 2MHz. Ideal for applications requiring digital tuned oscillators in compact designs.
HMC735LP5E
Analog Devices' HMC735LP5E is a VCO with 32 terminals, operating from 10.5 GHz to 12.2 GHz. It features -100 dBc/Hz phase noise, 21 dBm output power, and requires a supply voltage of 4.75V to 5.25V. Ideal for applications requiring precise frequency control in compact designs like communication systems and radar equipment.
MAX2622EUA
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Maximum Operating Frequency: 881 MHz; Maximum Control Voltage: 2.4 V; Minimum Control Voltage: .4 V;
HMC398QS16G
Analog Devices' HMC398QS16G is a VCO with 260mA supply current, 3dBm output power, and -105dBc/Hz phase noise. Ideal for applications requiring a voltage-controlled oscillator in the frequency range of 1400MHz to 1500MHz.
MAX2754EUA-T
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Minimum Control Voltage: .4 V; Package Equivalence Code: TSSOP8,.19; Nominal Supply Voltage: 3 V;
ROS-2500
Mini-circuits
Mini-circuits ROS-2500 is a VCO with 180 MHz/V modulation sensitivity, 6.5 dBm output power, and -66 dBc/Hz phase noise. Ideal for applications requiring a voltage-controlled oscillator operating at frequencies b/w 1600 MHz to 2500 MHz in surface-mount setups.
MQE001-902
Murata Manufacturing
Murata Manufacturing's MQE001-902 is a VCO with modulation sensitivity of 10 MHz/V, output power of -3 dBm, and nominal operating frequency of 902.5 MHz. It is used in applications requiring precise voltage-controlled oscillation such as communication systems due to its compact size and surface mounting feature.
LTC6992MPS6-2#TRPBF
LTC6992MPS6-2#TRPBF by Analog Devices is a VCO with 6 terminals, operating from -55 to 125°C. It has a supply voltage range of 2.25V to 5.5V and operates b/w 0.00000318MHz to 1MHz frequencies. Ideal for applications requiring precise voltage-controlled oscillation in compact designs using surface mount technology.
SN74LS625D
SN74LS625D by Texas Instruments is a VCO with 16 terminals, operating at 20MHz frequency. It has a supply voltage range of 4.75V to 5.25V and consumes up to 55mA current. Ideal for applications requiring precise voltage-controlled oscillation in temperature ranges from 0°C to 70°C.
LTC6992CDCB-4#TRPBF
LTC6992CDCB-4#TRPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a supply voltage range of 2.25V to 5.5V and control voltage range of 0.1V to 0.9V, making it suitable for applications requiring precise frequency control in compact designs. The package body material is PLASTIC/EPOXY, ideal for surface mounting in various temperature environments from 0°C to 70°C.
LTC6992IS6-2#TRPBF
LTC6992IS6-2#TRPBF by Analog Devices is a VCO with 6 terminals, operating from -40°C to 85°C. It has a supply voltage range of 2.25V to 5.5V and control voltage range of 0.1V to 0.9V, making it suitable for applications requiring precise frequency control in compact designs.
CLV1030E-LF
Z-communications
CLV1030E-LF by Z-communications is a VCO with Mod Sensitivity of 33 MHz/V, Output Power of 5.5 dBm, and Phase Noise at -106 dBc/Hz. Ideal for applications requiring precise frequency control in the range of 990 MHz to 1070 MHz. It operates on a nominal voltage of 5 V and has compact dimensions of 12.7mm x 12.7mm x 5.59mm for surface mount installations.
HMC732LC4B
Hittite Microwave
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Minimum Control Voltage: 0 V; Package Equivalence Code: LCC24,.16SQ,20; Offset Frequency: 10 kHz;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MAOC-009261-TR0500
M/a-com Technology Solutions
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Control Voltage: 1 V; Maximum Operating Frequency: 7900 MHz; Minimum Operating Temperature: -40 Cel;
MAOC-009260-PKG003
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; JESD-609 Code: e4; Minimum Operating Temperature: -40 Cel; Nominal Supply Voltage: 5 V;
MAOC-009266-TR0500
TE Connectivity
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Physical Dimension: 5.0mm x 5.0mm x 0.9mm; Minimum Control Voltage: 1 V; Maximum Operating Temperature: 85 Cel;
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Maximum Supply Voltage: 5.25 V; Additional Features: TAPE AND REEL; Physical Dimension: 5.0mm x 5.0mm x 0.9mm;
MAOC-009267-TR0500
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Control Voltage: 1 V; Maximum Operating Temperature: 85 Cel; Minimum Operating Frequency: 11200 MHz;
MAOC-009264-TR0500
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Additional Features: TAPE AND REEL; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
MAOC-009265-TR0500
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Output Power: 6 dBm; Additional Features: TAPE AND REEL; Maximum Operating Frequency: 10800 MHz;
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Maximum Operating Temperature: 85 Cel; Maximum Operating Frequency: 10800 MHz; Maximum Control Voltage: 13 V;
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Control Voltage: 1 V; Maximum Operating Frequency: 12600 MHz; JESD-609 Code: e3;
MAOC-009262-TR0500
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Physical Dimension: 5.0mm x 5.0mm x 0.9mm; Nominal Supply Voltage: 5 V; Maximum Operating Temperature: 85 Cel;
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Maximum Operating Frequency: 8200 MHz; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel;
TE Connectivity's MAOC-009264-TR0500 VCO offers 10.5 dBm output power, -90 dBc/Hz phase noise, and operates at 8800-9800 MHz frequencies. Ideal for applications requiring precise voltage-controlled oscillation in compact designs with a supply voltage of 5V.
MAOC-009267-PKG003
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Physical Dimension: 5.0mm x 5.0mm x 0.9mm; Minimum Control Voltage: 1 V; JESD-609 Code: e4;
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Operating Frequency: 7100 MHz; Output Power: 10 dBm; Terminal Finish: MATTE TIN;
MAOC-009871-TR0500
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Additional Features: TAPE AND REEL; Maximum Operating Temperature: 85 Cel; Maximum Supply Current: 175 mA;
MAOC-009871-TR1000
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Operating Temperature: -40 Cel; Minimum Control Voltage: 2 V; JESD-609 Code: e3;
MAOC-009872-TR1000
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Output Power: 5 dBm; Physical Dimension: 5.0mm x 5.0mm x 0.9mm; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved