Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HSMM-A101-R00H1 by Broadcom is a single color LED with peak wavelength of 523nm. It has a max forward current of 0.03A and viewing angle of 120°. Ideal for surface mount applications in electronics, offering green light with luminous intensity of 0.1125cd.
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
ComSIT Distribution GmbH
ComSIT USA
Digiode
Nova Conductors
Ampacity Inc.
$9.100
Andel Nordic
$14.380
$10.063
AZTECH Wire
$16.157
Decca Corp
$24.000
$23.520
$23.285
Perfect Parts
Continental Prestige Electronics
Argo Parts USA
Authorized Procurement Solutions
Aranea Global
Supply Digital
Corphita
Single configuration allows for easy installation and operation.
Low forward current consumption helps in energy efficiency.
Peak wavelength of 523 nm ensures a bright and vibrant green color output.
This single color LED simplifies design and application for specific lighting needs.
Having only 2 terminals simplifies the wiring process.
High operating temperature range allows for use in various environments.
Low profile design makes it suitable for compact applications.
Round shape provides uniform light distribution.
Wide operating temperature range ensures functionality in extreme conditions.
Matte tin finish offers good solderability and reliability.
Decent luminous intensity for bright illumination.
Vibrant green color output for attractive lighting effects.
Convenient packing method for storage and transportation.
High reverse voltage tolerance for added safety.
Optimal terminal pitch for easy PCB mounting.
Wide viewing angle ensures good visibility from different perspectives.
Surface mount design simplifies installation on PCBs.
Low forward voltage for efficient power usage.
Visible LEDs HSMM-A101-R00H1 attributes and parameters. Explore more Visible LEDs devices from Broadcom
Additional Features:
Color:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Minimum Luminous Intensity:
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
HSMM-A101-R00H1 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Obsolescence/ EOL - Mult Dev EOL 31/Jul/2019
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
General Semiconductor
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Cheng-yi Electronic
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semtech
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
Meritek Electronics
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
HLMP-1790-A00A2
Broadcom
Broadcom's HLMP-1790-A00A2 is a 3mm single color LED with peak wavelength of 565nm. With max forward current of 0.007A, it emits green light at 2.3mcd luminous intensity. Ideal for applications requiring a radial mount visible LED with a viewing angle of 50°.
Q12P1BXXW12E
Apem Components
The Apem Components Q12P1BXXW12E is a 12mm single color LED with diffused lens, emitting white light at 1200.0mcd intensity. Ideal for panel mounting applications, it has a wide 60° viewing angle and operates b/w -40°C to 85°C temperature range.
HLMP-1790
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTST-C170TBKT-5A
Lite-on Technology
LTST-C170TBKT-5A by Lite-on Technology is a 1.4mm BLUE LED with a peak wavelength of 468nm and viewing angle of 130°. Ideal for surface mount applications, it has a max forward current of 0.02A and nominal luminous intensity of 28.1mcd, making it suitable for various lighting projects.
HSMF-C164
HSMF-C164 by Broadcom is a 1.6mm dual-color LED with peak wavelengths of 637nm and 468nm, ideal for applications requiring separate elements. With a max forward current of 0.02A and viewing angle of 120°, it's suitable for surface mount configurations in electronics for status indicators or displays.
HLMP-3301
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 7; Lens Type: RED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LGR971-Z
Osram Opto Semiconductors
The Osram Opto Semiconductors LGR971-Z is a single color LED with peak wavelength of 572nm, forward current of 0.025A, and max forward voltage of 2.5V. Ideal for applications requiring green light emission in compact spaces due to its small size (1.4mm) and surface mounting feature.
597-7703-607F
Dialight
Dialight's 597-7703-607F is a dual-color LED with peak wavelengths of 639nm and 574nm. Featuring a water-clear lens, it has a viewing angle of 130° and nominal luminous intensity of 55/45 mcd. Ideal for surface mount applications, this LED has separate elements for red and green light emission, making it suitable for status indicators in various electronic devices.
HSMH-C150
HSMH-C150 by Broadcom is a 2mm SINGLE COLOR LED with peak wavelength of 660nm. It has max forward current of 0.03A and viewing angle of 170°. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
VLMC3100-GS08
Vishay Intertechnology
Vishay Intertechnology's VLMC3100-GS08 is a 2.4mm SINGLE COLOR LED with peak wavelength of 565nm and max forward current of 0.007A. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
SML-LXR851SISGC-TR
Lumex
SML-LXR851SISGC-TR by Lumex is a 2mm dual color LED with a common anode configuration. It has a peak wavelength of 632/570nm and a max forward current of 0.025A. This LED is suitable for surface mount applications and has a viewing angle of 120°.
551-1107-004F
Dialight's 551-1107-004F is a 3mm red LED array with 4 separate elements. It has a peak wavelength of 635nm, forward current of 0.007A, and operates b/w -55 to 100°C. Ideal for applications requiring high luminous intensity in a compact design.
HSMG-C170
Hewlett Packard
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 9.5; Lens Type: DIFFUSED; Maximum Forward Current: .02 A;
150060SS75000
Wuerth Elektronik & Kg
150060SS75000 by Wurth Elektronik is a single color LED with peak wavelength of 645nm and viewing angle of 140°. With a size of 1.1mm, it has a max forward current of 0.03A and nominal luminous intensity of 60.0mcd. Ideal for surface mount applications in electronics requiring super red light emission.
HSMG-C150
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 9.5; Lens Type: DIFFUSED; Color: GREEN;
HSMS-C170
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10; Lens Type: DIFFUSED; Terminal Finish: Gold (Au);
LGY876-P1Q2-24-Z
LGY876-P1Q2-24-Z by Osram Opto Semiconductors is a 1.7mm single color LED with peak wavelength of 572nm and green color. It has a max forward current of 0.03A, viewing angle of 120°, and nominal luminous intensity of 78.5mcd. Ideal for surface mount applications in electronics requiring compact, energy-efficient lighting solutions.
HLMP-4700
Everlight Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.0; Lens Type: TINTED DIFFUSED; Maximum Operating Temperature: 100 Cel;
559-3001-003F
Dialight 559-3001-003F is a 5mm LED with common bipolar terminal, max. forward current of 0.04A, and peak wavelengths of 660nm/565nm. Ideal for panel mount applications, this single color LED emits red/green light with viewing angle of 80°.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HSMM-A100-S00J1
HSMM-A100-S00J1 by Broadcom is a 2.2mm SINGLE COLOR LED with peak wavelength of 523nm and max forward current of 0.03A. Ideal for applications requiring GREEN light emission, such as indicator lights in electronic devices due to its compact size and surface mounting feature.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 350.0; Terminal Finish: Tin/Lead (Sn/Pb); Additional Features: HIGH RELIABILITY;
HSMM-A400-V8QM2
SINGLE COLOR LED; Terminal Finish: Tin (Sn); Viewing Angle: 120 deg; Maximum Reverse Voltage: 5 V; Height: 1.9 mm; Maximum Forward Voltage: 4.6 V;
HSMM-A430-X90M2
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 4695.0; Terminal Finish: MATTE TIN; Packing Method: TR, 7/13 INCH;
HSMM-A101-R00J1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 200.0; Terminal Finish: Silver (Ag); Maximum Operating Temperature: 100 Cel;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 200.0; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: SINGLE;
HSMM-C190
HSMM-C190 by Broadcom is a 1mm SINGLE COLOR LED with peak wavelength of 523nm. It has a viewing angle of 170° and max forward current of 0.02A. Ideal for applications requiring HIGH PERFORMANCE GREEN illumination in compact spaces.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: UNTINTED DIFFUSED; Height: .8 mm;
HSMM-C170
HSMM-C170 by Broadcom is a single color LED with peak wavelength of 523nm. It has a max forward current of 0.02A and viewing angle of 170°. Ideal for applications requiring high performance green lighting in compact spaces.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: UNTINTED DIFFUSED; Peak Wavelength (nm): 523;
HSMM-A400-U4QM2
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 787.5; Terminal Finish: TIN; Configuration: SINGLE;
HSMM-A100-U4PJ1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 787.5; Terminal Finish: Tin (Sn); Size: 2.2 mm;
HSMM-A430-W90M2
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 2400.0; Terminal Finish: Matte Tin (Sn); Additional Features: HIGH RELIABILITY;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 2400.0; Packing Method: TR; Configuration: SINGLE;
HSMM-A101-Q7PJ1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 115.0; Additional Features: HIGH RELIABILITY; Height: 1.9 mm;
HSMM-A400-T8YM2
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 627.5; Terminal Finish: Matte Tin (Sn); Height: 1.8 mm;
HSMM-A100-S8PJ1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 392.0; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -55 Cel;
HSMM-A400-W8QM2
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 2475.0; Terminal Finish: TIN; Additional Features: HIGH RELIABILITY;
HSMM-A400-W8YM2
SINGLE COLOR LED; Terminal Finish: SILVER; JESD-609 Code: e4;
HSMM-A101-R7PJ1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 220.0; Terminal Finish: Tin/Lead (Sn/Pb); Shape: ROUND;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved