Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HLMP-3507-D00B1 by Broadcom is a 5mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°, making it ideal for applications requiring high performance green light emission in bulk packaging.
Median Price
$0.418
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.227
100+ parts
$0.215
1k+ parts
10k+ parts
-
Avnet
$0.610
Digiode
$0.216
Vyrian
Electronics Depot
R&J Components
Nova Conductors
Inland Empire Components Inc.
PC Components Company LLC
Bristol Electronics
Sensible Micro Corp
Corohmni
$0.107
Semicontronic
$0.193
$0.188
$0.187
Decca Corp
$0.189
Corphita
$0.204
Advanced Electronics
Aztec Data Supply Inc.
$0.581
AZTECH Wire
$17.650
$16.950
$16.610
$16.280
Andel Nordic
$59.690
$41.784
Continental Prestige Electronics
Argo Parts USA
Authorized Procurement Solutions
Supply Digital
Glotronic Ltd.
Bastille Electronics
Single configuration allows for easy installation and operation of the LED.
Compact size makes it suitable for various applications where space is limited.
Low forward current helps in reducing power consumption and heat generation.
Peak wavelength of 565 nm provides a vibrant green color output.
Tinted diffused lens ensures uniform light distribution and reduces glare.
Single color LED simplifies circuit design and provides consistent color output.
Two terminals make it easy to connect and integrate the LED into electronic circuits.
High maximum operating temperature ensures reliability in various environmental conditions.
Optimal height for visibility and mounting in different applications.
Round shape offers a wide viewing angle and aesthetic appeal.
Low minimum operating temperature allows for reliable performance in colder environments.
Matte tin terminal finish provides good conductivity and solderability.
Green color output is visually appealing and suitable for various lighting applications.
High-performance green color ensures brightness and color accuracy.
Bulk packing method allows for cost-effective purchasing and storage of LEDs.
High maximum reverse voltage rating provides protection against reverse polarity.
Standard terminal pitch for easy integration into circuit boards and PCBs.
Wide viewing angle of 60° ensures good visibility from different directions.
Nominal luminous intensity of 6.15 mcd provides bright and visible light output.
Radial mount feature simplifies installation and allows for secure placement of the LED.
Low maximum forward voltage helps in efficient operation and power management.
Visible LEDs HLMP-3507-D00B1 attributes and parameters. Explore more Visible LEDs devices from Broadcom
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
T-code:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
HLMP-3507-D00B1 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Design/Specification - Mult Dev Die Chg 1/Jul/2021
PCN Assembly/Origin - Mult Dev Term Finish Chg 8/Nov/2019
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
Promax-johnton
Rugao Dachang Electronic
Vishay Telefunken
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
PIC18F4550-I/PT
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
STMicroelectronics
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
OVLLG8C7
Optek Technology
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 670.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
LGM67K-G1J2-24-Z
Osram Opto Semiconductors
Osram Opto Semiconductors' LGM67K-G1J2-24-Z is a 1.5mm single-color LED with peak wavelength of 572nm, emitting green light. It has a max forward current of 0.02A and viewing angle of 120°, suitable for surface mount applications in various electronic devices.
XHP35B-00-0000-0D0HD230E
Cree Led
SINGLE COLOR LED;
HLMP1301
Vch
Visible LEDs; Lens Type: DIFFUSED; Minimum Operating Temperature: -55 Cel; Height: 4 mm; Maximum Operating Temperature: 100 Cel; Peak Wavelength (nm): 635;
LGR971-KN-1-0-20-R18
Osram Opto Semiconductors' LGR971-KN-1-0-20-R18 is a 1.3mm SINGLE COLOR LED with peak wavelength of 572nm, emitting GREEN light at 26.05mcd luminous intensity. Ideal for surface mount applications with a wide 160° viewing angle and operating temperature range from -30 to 85 °C.
5310F5
Visual Communications Company
5310F5 by VCC is a 3mm GREEN LED with peak wavelength of 562nm. It has a max forward current of 0.03A and viewing angle of 55°. Ideal for applications requiring single color illumination in compact spaces.
LTW-170TK
Lite-on Technology
LTW-170TK by Lite-on Technology is a 1.4mm SINGLE COLOR LED with 130° viewing angle and 281.0mcd luminous intensity. Ideal for surface mount applications, it operates b/w -20 to 80 °C, with 0.02A forward current for white light output.
SML-LXT0805GW-TR
Lumex
SML-LXT0805GW-TR by Lumex is a single color LED with a peak wavelength of 565nm and a max forward current of 0.03A. It is commonly used in applications such as surface mount lighting due to its diffused milky white lens and green color at wavelength.
SML-LX15IGC-RP-TR
SML-LX15IGC-RP-TR by Lumex is a 3mm dual-color LED with common cathode configuration. It has a max forward current of 0.03A and peak wavelengths of 635nm/565nm, suitable for surface mount applications in visible LED displays.
HLMP-3507-D0001
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.15; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMF-C162
Broadcom
HSMF-C162 by Broadcom is a 1.6mm dual-color LED with peak wavelengths of 637nm and 595nm. With a viewing angle of 120°, it's ideal for surface mount applications requiring amber/orange-red light output. Operating temperatures range from -30 to 85 °C, making it suitable for various electronic devices.
OVLLB8C7
Tt Electronics Plc
OVLLB8C7 by Tt Electronics Plc is a 5mm SINGLE COLOR LED with peak wavelength of 466nm. It has a max forward current of 0.02A and viewing angle of 85°. Ideal for applications requiring BLUE light emission, such as indicator lights in electronic devices.
LST67F-T2V2-1-1-20-R18-Z
Osram Opto Semiconductors' LST67F-T2V2-1-1-20-R18-Z is a 2.4mm single color LED with peak wavelength of 645nm and max forward current of 0.05A. Ideal for applications requiring super red light emission, such as indicator lights in automotive or electronic devices.
SML-D12M8WT86M
ROHM
ROHM SML-D12M8WT86M is a 1.2mm SINGLE COLOR LED with milky white lens emitting YELLOWISH GREEN light at 25.0mcd intensity. It has a max forward current of 0.02A and operates b/w -40 to 85°C, suitable for surface mount applications in various electronic devices.
HLMP-1700
Fairchild Semiconductor
HLMP-1700 by Fairchild Semiconductor is a 3mm single color LED with a peak wavelength of 635nm and a max forward current of 0.0075A. It is commonly used in applications that require high efficiency red light emission, such as indicator lights or displays.
HLMP-3301-D0000
Hewlett Packard
SINGLE COLOR LED; Size: 5 mm; Maximum Forward Current: .03 A; Minimum Operating Temperature: -55 Cel; T-code: T-1 3/4; Color: HIGH EFFICIENCY RED;
LTL-4231N
LTL-4231N by Lite-on Technology is a 3mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°, making it ideal for applications requiring green light emission in compact spaces. With a radial mount feature and matte tin terminal finish, this LED operates b/w -55°C to 100°C efficiently.
SLR-56YY3F
ROHM's SLR-56YY3F is a 5mm SINGLE COLOR LED with peak wavelength of 585nm. With max forward current of 0.02A, it offers yellow light at 10.0mcd luminous intensity. Ideal for applications requiring diffused yellow light emission in a compact form factor.
KPT-2012SURCK
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Viewing Angle: 120 deg;
597-7701-202F
Dialight
The Dialight 597-7701-202F is a dual color LED with separate configuration and a size of 2.39 mm. It has a max forward current of 0.03 A and peak wavelengths of 635 nm (super red) and 572 nm (green). This LED is suitable for surface mount applications requiring water clear lenses and offers a viewing angle of 120°.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HLMP-3507
HLMP-3507 by Broadcom is a 5mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high performance green light emission in bulk packaging, with radial mounting feature.
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.2; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Height: 8.8 mm; No. of Functions: 1;
HLMP3507
Three-five Systems
HLMP3507 by Three-five Systems is a green LED with peak wavelength of 565nm and max forward current of 0.03A. With diffused lens, it has a viewing angle of 75° and operates b/w -55 to 100°C. Ideal for applications requiring low power consumption and precise color emission in various environments.
HLMP-1790-A00A2
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
Broadcom's HLMP-1790-A00A2 is a 3mm single color LED with peak wavelength of 565nm. With max forward current of 0.007A, it emits green light at 2.3mcd luminous intensity. Ideal for applications requiring a radial mount visible LED with a viewing angle of 50°.
HLMP-1790
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); T-code: T-1; Maximum Forward Voltage: 2.2 V; Viewing Angle: 50 deg;
HLMP1790
Cml Technologies & Kg
HLMP1790 by Cml Technologies & Kg is a 3mm SINGLE COLOR LED with peak wavelength of 565nm. With max forward current of 0.0075A, it's ideal for applications requiring high efficiency green light emission in a compact form factor.
Fairchild Semiconductor's HLMP-1790 is a 3mm single color LED with peak wavelength of 585nm. It has a max forward current of 0.0075A and forward voltage of 2.2V, suitable for applications requiring diffused green light emission in a radial mount configuration.
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2; Lens Type: GREEN DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
Everlight Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.0; Lens Type: TINTED DIFFUSED; Color: GREEN;
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: MATTE TIN;
Quality Technologies
SINGLE COLOR LED; No. of Functions: 1; Maximum Forward Current: .0075 A; Color: HIGH EFFICIENCY GREEN; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel;
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Viewing Angle: 50 deg; Minimum Operating Temperature: -55 Cel;
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Maximum Forward Voltage: 2.2 V; JESD-609 Code: e0;
Aborn Electronics
Visible LEDs; Lens Type: DIFFUSED; Maximum Forward Voltage: 3 V; Peak Wavelength (nm): 635; Maximum Forward Current: .02 A; Minimum Operating Temperature: -55 Cel;
HLMP-1301
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.5; Lens Type: TINTED DIFFUSED; Viewing Angle: 90 deg;
National Semiconductor
HLMP1301 by National Semiconductor is a red visible LED with peak wavelength of 635nm and max forward current of 0.02A. With diffused lens type, it has min luminous intensity of 60cd and operates b/w -55 to 100°C. Ideal for applications requiring precise red light emission in a compact form factor.
SINGLE COLOR LED; Minimum Operating Temperature: -55 Cel; Color: HIGH EFFICIENCY RED; Shape: ROUND; Size: 3 mm; Configuration: SINGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved