Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ASMT-AR30-ARR00 by Broadcom is a 6mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.7A and operates b/w -40 to 100°C. Ideal for surface mount applications, providing a red light source with a wide viewing angle of 140°.
Median Price
$2.077
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Digiode
VNN
Advanced Electronics
$0.181
$0.165
$0.148
Corohmni
$0.379
Continental Prestige Electronics
$2.035
Argo Parts USA
Netroflash
AZTECH Wire
$5.240
Ampacity Inc.
$7.100
Decca Corp
$20.000
$19.600
$19.404
QUARKTWIN TECHNOLOGY LTD
Supply Digital
Corphita
Having a single configuration simplifies the installation process and reduces the chances of errors.
Compact size allows for versatile placement in various designs and applications.
High maximum forward current capability ensures reliable and consistent performance.
Peak wavelength of 635 nm indicates a vibrant red color output.
Single color LED design simplifies the circuitry and provides a uniform lighting experience.
Having 2 terminals makes the connection process straightforward and efficient.
High maximum operating temperature tolerance ensures durability in various environmental conditions.
Low profile height allows for sleek and compact designs.
Round shape provides a wide viewing angle and even light distribution.
Low minimum operating temperature allows for use in cold environments without compromising performance.
Silver terminal finish ensures good conductivity and long-term reliability.
Vibrant red color output is ideal for applications where visibility and aesthetic appeal are important.
Tube packaging provides protection during transportation and storage.
Wide viewing angle of 140° ensures good visibility from different perspectives.
Surface mount capability makes installation easy and enables integration into compact designs.
Visible LEDs ASMT-AR30-ARR00 attributes and parameters. Explore more Visible LEDs devices from Broadcom
Color:
Configuration:
Maximum Forward Current:
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Finish:
Viewing Angle:
ASMT-AR30-ARR00 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
Itt Semiconductor
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743ZIT6
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
HLMP-3301-D0000
Broadcom
HLMP-3301-D0000 by Broadcom is a 5mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high efficiency red light emission in bulk packaging, with radial mounting feature.
SSL-LX5093SIC
Lumex
Lumex SSL-LX5093SIC is a 5mm WATER CLEAR LED with peak wavelength of 636nm. It has a max forward current of 0.025A and nominal luminous intensity of 1800mcd. Ideal for applications requiring SUPER HIGH INTENSITY RED illumination in various industries.
APT1608SURCK
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Maximum Forward Current: .03 A;
HLMP-1790
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2; Lens Type: GREEN DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SML-P11MTT86
ROHM
ROHM SML-P11MTT86 is a 0.6mm SINGLE COLOR LED with max. forward current of 0.02A, emitting YELLOW GREEN light at 2.1mcd intensity. Ideal for surface mount applications in electronics due to its small size and color clarity.
KP-2012SGC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Height: .75 mm;
LTST-C170GKT
Lite-on Technology
LTST-C170GKT by Lite-on Technology is a 1.4mm GREEN LED with a peak wavelength of 565nm and max forward current of 0.03A. Ideal for surface mount applications, it offers a viewing angle of 130° and nominal luminous intensity of 6.0mcd, making it suitable for various lighting solutions.
XHP70D-00-0000-0D0HP20E3
Cree Led
SINGLE COLOR LED;
HLMP-1301-101F
Dialight
The Dialight HLMP-1301-101F is a 3mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and nominal luminous intensity of 13.8mcd. Ideal for applications requiring a red light source, such as indicator lights in electronic devices or automotive lighting systems.
CMD15-21VGD/TR8
Visual Communications Company
CMD15-21VGD/TR8 by VCC is a 2mm green LED with diffused lens. It has a peak wavelength of 570nm and max forward current of 0.025A, suitable for surface mount applications in visible LED category. Operating temperature ranges from -40 to 85°C, making it ideal for various lighting projects.
HLMP1301
Three-five Systems
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Minimum Operating Temperature: -55 Cel; Height: 4 mm;
HSME-C191
HSME-C191 by Broadcom is a 1mm green LED with a peak wavelength of 570nm. It has a max forward current of 0.02A and a viewing angle of 170°. This surface mount LED is commonly used in visible light applications requiring high luminous intensity.
Cml Technologies & Kg
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.5; Lens Type: DIFFUSED; Height: 1.1 mm;
TLDR5400
Temic Semiconductors
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 70.0; Lens Type: TINTED DIFFUSED; Packing Method: TR;
HLMP-1503
Quality Technologies
SINGLE COLOR LED; Color: HIGH EFFICIENCY GREEN; Minimum Operating Temperature: -55 Cel; Configuration: SINGLE; T-code: T-1; No. of Functions: 1;
HSMF-C113
HSMF-C113 by Broadcom is a 3-element COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 637/570/468 nm. With a size of 2.1 mm and max forward current of 0.02 A, it's ideal for surface mount applications requiring red/green/blue illumination at a viewing angle of 120°.
598-8510-207F
Dialight's 598-8510-207F is a 2mm dual-color LED with water-clear lens. It has max forward current of 0.02A, operating temp range -40 to 100°C, and viewing angle of 160°. Ideal for surface mount applications requiring red/green light indication in compact spaces.
HSMF-C155
HSMF-C155 by Broadcom is a dual color LED with separate, 2-element configuration. It has a size of 2.06 mm and a max forward current of 0.02 A. This LED is commonly used in applications that require high efficiency red/green lighting with a viewing angle of 170°.
598-8050-107F
Dialight's 598-8050-107F is a single color LED with water clear lens, emitting yellow light. It has a forward voltage of 2.4V and max forward current of 0.025A, suitable for surface mount applications in various electronic devices. Operating temperature ranges from -40 to 100°C, making it ideal for industrial and automotive lighting solutions.
HSMQ-C190
HSMQ-C190 by Broadcom is a 1mm single color LED with peak wavelength of 520nm. With a viewing angle of 140° and luminous intensity of 145.0mcd, it's ideal for surface mount applications requiring green light emission at temperatures ranging from -40 to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ASMT-UWBG-NACF8
ASMT-UWBG-NACF8 by Broadcom is a single color LED with max forward current of 0.1A and max operating temp of 100°C. At 1.1mm height, it emits white light at 120° viewing angle. Ideal for applications requiring low power consumption and high brightness in compact spaces.
ASMT-YTB7-0AA02
TRIPLE COLOR LED; Terminal Finish: Silver (Ag); JESD-609 Code: e4;
ASMT-YTD7-0AA02
ASMT-YTD7-0AA02 by Broadcom is a 2.3mm TRIPLE COLOR LED with separate, 3-element configuration and diffused lens. It has peak wavelengths of 630nm (RED), 522nm (GREEN), and 465nm (BLUE). Ideal for applications requiring colorful illumination with a viewing angle of 120° and nominal luminous intensities of up to 1900mcd.
ASMT-YTB2-0BB02
ASMT-YTB2-0BB02 by Broadcom is a 2.3mm rectangular visible LED with separate, 3-element configuration. It has a peak wavelength of 629/521/464nm and max forward current of 0.05A. This LED is commonly used in applications requiring single color illumination with red/green/blue colors, such as displays and indicators.
ASMT-CW00
ASMT-CW00 by Broadcom is a 1.2mm single color LED with a max forward current of 0.01A. It has a white color and a viewing angle of 170°. This surface mount LED is commonly used in applications requiring bright, non-diffused lighting.
ASMT-YTC7-0AA02
ASMT-YTC7-0AA02 by Broadcom is a 2.3mm TRIPLE COLOR LED with peak wavelengths of 630/522/465nm, offering red/green/blue colors. With a max forward current of 0.025A and viewing angle of 110°, it's ideal for surface mount applications requiring diffused lighting effects. Operating b/w -40 to 100 °C, this LED has a nominal luminous intensity range of 160.0-840.0mcd for versatile lighting solutions.
ASMT-RF45-AN002
ASMT-RF45-AN002 by Broadcom is a 1.1mm SINGLE COLOR LED with peak wavelength of 574nm and max forward current of 0.02A. Ideal for applications requiring YELLOW GREEN light emission, it has a viewing angle of 145° and operates b/w -40°C to 100°C temperatures.
ASMT-RJ45-AQ502
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 130.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: SILVER;
ASMT-RR45-AQ902
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: SILVER;
ASMT-YTD2-0BB02
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Nominal Luminous Intensity (mcd): 745.0/1600.0/380.0; Terminal Finish: SILVER; Viewing Angle: 120 deg;
ASMT-QTB0-0AA02
ASMT-QTB0-0AA02 by Broadcom is a 2.9mm TRIPLE COLOR LED with COMMON ANODE configuration and 120° viewing angle. It has peak wavelengths of 629/521/465 nm, max forward current of 0.05 A, and nominal luminous intensities of 620.0/1200.0/280.0 mcd. Ideal for surface mount applications requiring red/green/blue illumination in various electronic devices.
ASMT-QRBD-AEF0E
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Size: 2.4 mm; Maximum Forward Current: .15 A; Height: 1.9 mm;
ASMT-UWB1-NX3J2
ASMT-UWB1-NX3J2 by Broadcom is a single color LED with max forward current of 0.03A and max forward voltage of 3.6V. With a viewing angle of 120°, it's ideal for applications requiring white light illumination in compact spaces due to its small height of 1.8mm and surface mounting feature.
ASMT-QRBD-AGH0E
ASMT-JR30-ARS01
ASMT-JR30-ARS01 by Broadcom is a 3.7mm SINGLE COLOR LED with peak wavelength of 635nm, forward current of 0.7A, and forward voltage of 3.1V. Ideal for applications requiring surface mount visible LEDs with orange-red light emission in a compact round shape.
ASMT-CB20
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 25.0; Terminal Finish: Silver (Ag); Packing Method: TAPE;
ASMT-UWB1-NX3B2
ASMT-UWB1-NX3B2 by Broadcom is a single color LED with max forward current of 0.03A and viewing angle of 120°. Ideal for surface mount applications, it has a max operating temp of 85°C and emits white light at a wavelength of 3.6V.
ASMT-UWB1-NX3G2
ASMT-UWB1-NX3G2 by Broadcom is a single color LED with 0.03A max forward current and 2300.0mcd luminous intensity. Ideal for surface mount applications, it has a viewing angle of 120° and operates b/w -40 to 85 °C temperatures.
ASMT-JA30-ARS01
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Terminal Finish: SILVER; Maximum Reverse Voltage: 5 V; No. of Functions: 1;
ASMT-UWB1-NX302
ASMT-UWB1-NX302 by Broadcom is a single color LED with max forward current of 0.03A and viewing angle of 120°. Ideal for surface mount applications, it has a white color at wavelength and nominal luminous intensity of 2300 mcd.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved