Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ACPL-352J-000E by Broadcom is a MOSFET Gate Driver with 16 terminals, operating voltage range of 4.5V to 30V, and turn-on/off time of 0.15us. It is used in industrial applications requiring high side drivers for IGBT/MOSFET with a small outline package style.
Median Price
$7.900
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$4.760
1k+ parts
$4.320
10k+ parts
$4.030
DigiKey
$8.040
$5.292
$4.451
$4.171
RS (Exports)
-
$6.646
Nova Conductors
$4.780
Digiode
$7.182
Chip Stock
Vyrian
VNN
Corohmni
$3.939
Continental Prestige Electronics
$4.684
Netroflash
$4.541
$4.445
Decca Corp
$5.650
$5.537
$5.482
Ampacity Inc.
Corphita
$6.804
Advanced Electronics
$11.220
Neutron USA
$143.900
Perfect Parts
S.R.D Solutions
Argo Parts USA
Supply Digital
Plastic/epoxy material ensures durability and reliability of the package, protecting the internal components.
Surface mount capability allows for easy and efficient PCB assembly.
Supports a maximum supply voltage of 5.5V, suitable for various applications.
Rectangular shape provides a compact and space-saving design for easy integration into electronic devices.
Higher number of terminals allow for more connectivity options and flexibility in circuit design.
Wide operating temperature range of -40 to 105°C enables reliable performance in harsh environmental conditions.
Low seated height helps in minimizing the overall profile of the package for compact designs.
High side driver capability allows for efficient control of power MOSFETs in high-side switching applications.
Nominal supply voltage of 5V ensures compatibility with standard power supply systems.
Fast turn-on time of 0.15 microseconds helps in quick and responsive switching operations.
MOSFET Gate Drivers ACPL-352J-000E attributes and parameters. Explore more MOSFET Gate Drivers devices from Broadcom
High Side Driver:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Supply Voltage-1:
Minimum Supply Voltage-1:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Turn-off Time:
Turn-on Time:
Width:
ACPL-352J-000E Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - ACPL-YYY DS Chg 08/Jan/2018 ACPL-YYY DS Rev 24/Jan/2018
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
Semitron
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
1N4148WS
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM5050MKX-2/NOPB
National Semiconductor
MOSFET Drivers; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSOP; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE, THIN PROFILE;
TC4426ACOA
Telcom Semiconductor
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FAN7384MX
Onsemi
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: NICKEL GOLD PALLADIUM SILVER;
MIC5021YM
Micrel
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
PDRV8706HRHBQ1
PDRV8706HRHBQ1 by Texas Instruments is a MOSFET gate driver with a max supply voltage of 37V and min operating temperature of -40°C. It features push-pull output characteristics, suitable for automotive applications requiring high side drivers. With a turn-on time of 0.85us and turn-off time of 0.6us, it offers fast switching performance in a compact chip carrier package style.
LM5107SD/NOPB
LM5107SD/NOPB by Texas Instruments is a MOSFET gate driver with 2 channels, 1.4A max output current, and 12V nominal voltage. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 0.056us. Ideal for high side driving applications requiring fast switching speeds and low power consumption.
TC4427AEOA
Microchip Technology
TC4427AEOA by Microchip Technology is a MOSFET gate driver with 2 functions, operating at supply voltages from 4.5V to 18V. It features a totem-pole output and Schmitt trigger input characteristics, making it ideal for industrial applications requiring high side drivers with fast turn-on/off times of 0.085 us.
MCP1416T-E/OTVAO
MCP1416T-E/OTVAO by Microchip is a MOSFET Gate Driver with 18V max supply voltage, AEC-Q100 screening level, and -40 to 125°C operating temperature range. Ideal for automotive applications, it features a small outline package with Schmitt trigger input characteristics and 1.5A output peak current limit.
IRS10752LTRPBF
International Rectifier
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR;
2ED020I12FIXUMA1
Infineon Technologies
2ED020I12FIXUMA1 by Infineon Technologies is a MOSFET gate driver with a max supply voltage of 18V and built-in protections for over current, thermal, and under voltage. It is designed for automotive applications, featuring a turn-on time of 0.12us and a turn-off time of 0.13us. With a small outline package style and source/sink output current flow direction, it offers reliable performance in high-temperature environments.
UCC27322DGNG4
UCC27322DGNG4 by Texas Instruments is a MOSFET gate driver with a max supply voltage of 15V and min of 4.5V, suitable for industrial applications. It features a turn-on/off time of 0.07us, output peak current limit of 9A, and operates in temperatures ranging from -40 to 105°C. Ideal for driving power MOSFETs in various electronic systems requiring precise control and high efficiency.
ISL6144IRZA
Renesas Electronics
ISL6144IRZA by Renesas Electronics is a MOSFET gate driver with a max supply voltage of 75V and turn-off time of 0.3us. It is designed for industrial applications, featuring a package style of chip carrier with very thin profile and matte tin terminal finish. The high side driver operates in temperatures ranging from -40 to 105°C, making it suitable for various industrial automation systems.
LT1158ISW#PBF
Analog Devices
LT1158ISW#PBF by Analog Devices is a MOSFET gate driver with a max supply voltage of 30V and turn-off time of 0.55us. It is used in industrial applications, featuring a small outline package style and high side driver capability for efficient power management. With surface mount compatibility and dual terminal position, it operates b/w -40 to 85°C temperature range.
IR2112SPBF
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MIC4427YMM
Rochester Electronics
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
TC4426EOA
LTC7000IMSE#PBF
LTC7000IMSE#PBF by Analog Devices is a MOSFET Gate Driver with 135V max supply voltage, 3.5V min supply voltage, and 0.07us turn-on/off time. Ideal for automotive applications due to its CMOS technology and high side driver feature.
LTC7000IMSE-1#PBF
LTC7000IMSE-1#PBF by Analog Devices is a MOSFET Gate Driver with 135V max supply voltage, 3.5V min supply voltage, and 0.07us turn-on/off time. Ideal for automotive applications due to its CMOS technology and high side driver feature.
UCC27211DDA
UCC27211DDA by Texas Instruments is a MOSFET gate driver with 2 channels, 12V nominal voltage, and 4A max output current. It is designed for automotive applications, featuring a small outline package style and high side driver functionality. With a turn-on time of 0.6us and turn-off time of 0.4us, it operates in temperatures ranging from -40 to 140°C.
HIP2210FRTZ-T
HALF BRIDGE BASED MOSFET DRIVER; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ACPL-337J-500E
Broadcom
ACPL-337J-500E by Broadcom is a MOSFET Gate Driver with 16 terminals, operating voltage range of 4.5V to 5.5V, and turn-on time of 0.22 us. It is used in industrial applications for driving MOSFETs efficiently at temperatures ranging from -40°C to 105°C.
ACPL-337J-000E
ACPL-337J-000E by Broadcom is a MOSFET Gate Driver with 16 terminals, operating voltage range of 4.5V to 5.5V, and turn-on/off times of 0.22us/0.25us. Ideal for industrial applications requiring high temperature tolerance up to 105°C, it features a small outline package style suitable for surface mount assembly.
ACPL-K342-560E
BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER; Terminal Finish: TIN; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
ACPL-352J-500E
BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
ACPL-339J-000E
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
ACPL-339J-500E
ACPL-H342-000E
BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER; Moisture Sensitivity Level (MSL): 1; Terminal Finish: TIN; Peak Reflow Temperature (C): 260;
ACPL-H342-500E
BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260;
ACPL-330J-000E
ACPL-336J-500E
ACPL-336J-500E by Broadcom is a MOSFET Gate Driver with 16 terminals, operating voltage range of 4.5V to 30V, and turn-on time of 0.22us. It is designed for industrial applications requiring high-speed switching such as inverter-based IGBT/MOSFET drivers.
ACPL-31JT-000E
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
ACPL-H342-560E
BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260;
ACPL-K342-000E
BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; Terminal Finish: TIN;
ACPL-K342-500E
BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Terminal Finish: TIN;
ACPL-335J-500E
ACPL-330J-500E
ACPL-H342-060E
BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260;
ACPL-31JT-500E
ACPL-335J-000E
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved