Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns SRR0604-680KL is a shielded, surface mount fixed inductor with 68uH nominal inductance. Ideal for power applications, it has a max rated current of 0.5A and operates b/w -40°C to 125°C. With a self-resonance frequency of 15MHz and DC resistance of 0.52 ohm, this general purpose inductor is constructed with ferrite core material.
Median Price
$0.386
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Arrow
1+ parts
$0.305
100+ parts
-
1k+ parts
$0.139
10k+ parts
DigiKey
$0.710
$0.483
$0.397
$0.327
Mouser Electronics
$0.369
Newark
$0.812
Chip1Stop
$0.245
$0.220
Verical
$0.362
TTI Europe
$0.312
$0.264
Farnell
$0.330
Element14
$0.593
$0.534
Nova Conductors
$0.109
Electro Sonic
$0.322
$0.317
ComSIT Distribution GmbH
ComSIT USA
Vyrian
Ampacity Inc.
$0.208
Continental Prestige Electronics
$0.301
$0.288
$0.268
$0.258
Argo Parts USA
$0.412
$0.400
Aztec Data Supply Inc.
$0.452
Corohmni
$0.802
Authorized Procurement Solutions
Perfect Parts
Netroflash
$0.404
$0.391
$0.383
Easy to install and fits well on circuit boards, allowing for efficient use of space.
Helps to reduce electromagnetic interference, ensuring better performance in sensitive electronic devices.
Provides versatility in circuit design and allows for easier connection.
Suitable for applications requiring low frequency operation.
Ideal for power applications requiring a specific inductance value.
Can handle moderate current levels, suitable for many electronic devices.
Offers high magnetic permeability for better inductance performance.
Fixed Inductors SRR0604-680KL attributes and parameters. Explore more Fixed Inductors devices from Bourns
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
SRR0604-680KL Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Design/Specification - SRR0603,SRR0604 Series Core Design Jan/2017
PCN Assembly/Origin - Magnetic products Oct/2013
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
Philips Semiconductors
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
IHLP2020CZER100M01
Vishay Intertechnology
Vishay Intertechnology's IHLP2020CZER100M01 is a shielded, surface mount inductor with 10uH nominal inductance and 2.5A max rated current. Ideal for high current applications, this rectangular package has a self-resonance frequency of 16MHz and operates b/w -55°C to 125°C.
SRR1210-680M
Bourns
Bourns SRR1210-680M is a shielded, surface mount fixed inductor with 68uH nominal inductance. It has a max rated current of 3A and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features a self-resonance frequency of 3.8MHz and DC resistance of 0.102 ohm.
NRS4018T6R8MDGJ
Taiyo Yuden
Taiyo Yuden's NRS4018T6R8MDGJ is a fixed inductor with 6.8uH nominal inductance, 1.45A max current, and 30MHz self-resonance freq. Ideal for power applications, it features dual-ended terminals, SMT package style, and ferrite core material.
36501E16NJTDG
TE Connectivity
TE Connectivity's 36501E16NJTDG is a surface mount fixed inductor with dual-ended terminals. It has a nominal inductance of 0.016 uH and max rated current of 0.56 A, making it ideal for RF applications. With a self-resonance frequency of 3100 MHz and compact size (1.27mm x 0.76mm x 0.61mm), it suits general purpose inductor needs.
IHLP2525CZER1R0M01
Vishay Intertechnology's IHLP2525CZER1R0M01 is a shielded, surface mount fixed inductor with 1uH nominal inductance and 11A max rated current. Ideal for high current applications, this general purpose inductor has a DC resistance of 0.01 ohm and operates b/w -55°C to 125°C.
MLZ1608M100WT
TDK
The TDK MLZ1608M100WT is a 10uH fixed inductor with 2 terminals, suitable for RF applications. It features a max operating temperature of 125°C and a self-resonance frequency of 50MHz. With a compact size of 1.6mm x 0.8mm x 0.8mm, it is ideal for surface mount designs requiring high-frequency performance.
DR74-4R7-R
Coiltronics
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
CM322522-2R2KL
Bourns CM322522-2R2KL is a 1210 SMT inductor with 2.2uH nominal inductance, suitable for RF applications. It has a max operating temp of 125°C, 0.32A rated current, and 30 min quality factor at L-nom. Ideal for general purpose use due to its ferrite core material and self-resonance frequency of 75MHz.
NLC453232T-100K-PF
NLC453232T-100K-PF by TDK is a 10uH fixed inductor with 0.5ohm DC resistance, suitable for general purpose applications. It operates b/w -40 to 105°C, handling a max current of 0.55A. This SMT inductor has dual-ended terminals and a 10% tolerance level, making it ideal for various electronic circuits.
SRN8040-330M
Bourns SRN8040-330M is a shielded, surface mount inductor with 33uH nominal inductance and 1.7A max rated current. Ideal for power applications, it operates b/w -40 to 125°C with a self-resonance frequency of 10MHz.
IHLP1616ABER2R2M11
IHLP1616ABER2R2M11 by Vishay Intertechnology is a surface mount, shielded fixed inductor with a nominal inductance of 2.2 uH and max rated current of 2.75 A. It is a high current inductor suitable for general purpose applications, featuring a self-resonance frequency of 49 MHz and DC resistance of 0.0835 ohm.
B82141A1104J000
B82141A1104J000 by TDK is a 100uH general purpose inductor with 0.6mm lead diameter and axial terminal placement. It operates b/w -55°C to 125°C, has a max rated current of 0.17A, and features a self-resonance frequency of 5.3MHz. Ideal for RF applications due to its tubular construction and ferrite core material.
U10-9
Torotel Products
The Torotel Products U10-9 is a shielded radial fixed inductor with 20000 uH nominal inductance. It operates b/w -55 to 85 °C, has 2.9 ohm DC resistance, and uses molybdenum permalloy core material. Ideal for RF applications due to its circular package design and flexible lead terminals at 0.001 MHz test frequency.
DRA74-470-R
Eaton Corporation
DRA74-470-R by Eaton Corp is a shielded fixed inductor with 47uH nominal inductance, 1.37A max current, and -40 to 165°C operating temp range. Ideal for general purpose applications requiring compact SMT package with TR packing method.
33470
Hirel Systems
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Manufacturer Series: 168; Maximum Rated Current: 118 A;
DR125-100-R
Cooper Electronic Technologies
DR125-330-R
Eaton Corporation's DR125-330-R is a shielded, surface mount fixed inductor with 33uH nominal inductance. It has a max rated current of 3.28A and operates b/w -40 to 125°C, making it ideal for power applications requiring general purpose inductors. The dual-ended terminal placement and ferrite core construction ensure efficient performance in compact rectangular package measuring 12.5mm x 12.5mm x 6mm.
74437529203220
Wuerth Elektronik & Kg
Wurth Elektronik's 74437529203220 is a shielded, high current inductor with 22uH nominal inductance and 23.9A max rated current. Ideal for general purpose applications, it features dual-ended terminals, wraparound shape, and operates b/w -40 to 125°C.
B82476A1104M000
B82476A1104M000 by TDK is a surface mount fixed inductor with a nominal inductance of 100 uH and max rated current of 1.3 A. It is a general purpose inductor suitable for power applications, with a rectangular package measuring 12.95 mm in length, 9.4 mm in width, and 5.08 mm in height.
3615A101K
Meggitt Electronic Components
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Self Resonance Frequency: 8 MHz;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SRR0604-101KL
SRR0603-220ML
Bourns SRR0603-220ML is a shielded, surface mount inductor with 22uH nominal inductance and 0.7A max current rating. Ideal for power applications, it features a ferrite core, 20% tolerance, and operates b/w -40°C to 125°C.
SRR0603-470KL
SRR0603-101KL
The Bourns SRR0603-101KL is a shielded, surface mount fixed inductor with 100uH nominal inductance and 1.5 ohm DC resistance. It is a general purpose inductor suitable for power applications, featuring a self-resonance frequency of 9MHz and operating temperature range from -40°C to 125°C.
SRR0603-4R7ML
SRR0805-2R2M
SRR0603-221KL
SRR0603-221KL by Bourns is a surface mount, shielded fixed inductor with a nominal inductance of 220 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.2 A and a self-resonance frequency of 5 MHz.
SRR0603-3R3ML
SRR0604-100ML
The Bourns SRR0604-100ML is a surface mount, shielded fixed inductor with dual-ended terminal placement. It has a nominal inductance of 10 uH and can handle a max rated current of 1.3 A. This general purpose inductor is commonly used for power applications.
SRR0805-102K
Bourns SRR0805-102K is a shielded fixed inductor with 1000uH nominal inductance, 125°C max operating temp, and 10% tolerance. Ideal for power applications, it features dual-ended terminals, matte tin finish over nickel, and ferrite core material.
SRR0805-120M
SRR0805-150M
SRR0603-681KL
SRR0906-103YL
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 8; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
SRR0603-100ML
Bourns SRR0603-100ML is a shielded fixed inductor with 10uH nominal inductance, 1.1A max current, and 25MHz self-resonance freq. Ideal for power applications, it's a surface mount component with dual-ended terminals and ferrite core material.
SRR0604-6R8ML
SRR0603-330KL
Bourns SRR0603-330KL is a shielded, surface mount fixed inductor with 33uH nominal inductance. Ideal for power applications, it has a max rated current of 0.6A and operates b/w -40°C to 125°C. Its compact size (6.5mm x 6.5mm x 3.1mm) makes it suitable for various general purpose inductor needs.
SRR0604-4R7ML
SRR0604-470KL
SRR0604-680K
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved