Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns SRR0604-470KL is a shielded, surface mount fixed inductor with 47uH nominal inductance. It operates b/w -40 to 125°C, with a max rated current of 0.6A. Ideal for power applications, this general purpose inductor has a self-resonance frequency of 18MHz and DC resistance of 0.36 ohm.
Median Price
$0.676
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Farnell
1+ parts
$0.611
100+ parts
$0.416
1k+ parts
$0.318
10k+ parts
-
DigiKey
$0.740
$0.502
Mouser Electronics
$0.503
$0.370
$0.369
Newark
$0.810
$0.613
Distrelec
$0.879
Element14
$1.030
$0.699
$0.534
Arrow
$0.322
$0.310
Verical
$0.324
$0.311
Chip1Stop
$0.245
$0.218
Master Electronics
$0.304
$0.291
IBS Electronics
$0.427
$0.400
Electro Sonic
$0.320
$0.308
Micros
Partservice
$0.315
Micros sp.j. W. Kędra i J. Lic
$0.337
Rebound Electronics
ComSIT Distribution GmbH
Nova Conductors
Ampacity Inc.
$0.208
Infinite Electronics LLP (Excess)
Perfect Parts
Argo Parts USA
Continental Prestige Electronics
EMSNET (Excess)
Aranea Global
Allows for easy and secure mounting on PCB, saving space and making assembly more efficient.
Provides better electromagnetic interference (EMI) protection, ensuring reliable and stable operation in noisy environments.
Allows for flexibility in circuit design and layout, enhancing compatibility with different systems.
Ensures accurate and consistent performance at low frequencies, suitable for various applications.
Indicates the compact size of the inductor, ideal for space-constrained designs.
Offers a sturdy and stable structure, making the inductor durable and reliable for long-term use.
Designed to handle higher currents and power levels, making it suitable for power supply and voltage regulation circuits.
Provides the desired inductance value for specific circuit requirements, ensuring optimal performance.
Capable of handling moderate current levels, making it suitable for a wide range of applications.
Offers high magnetic permeability and low eddy current losses, improving inductor efficiency and performance.
Fixed Inductors SRR0604-470KL attributes and parameters. Explore more Fixed Inductors devices from Bourns
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
SRR0604-470KL Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Design/Specification - SRR0603,SRR0604 Series Core Design Jan/2017
PCN Assembly/Origin - Magnetic products Oct/2013
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Diotec Semiconductor Ag
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
BSS138BK,215
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Fairchild Semiconductor
Toshiba
NRS4018T2R2MDGJ8
Taiyo Yuden
NRS4018T2R2MDGJ8 by Taiyo Yuden is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 2.2A max rated current. It is a general purpose power inductor suitable for applications requiring high performance and reliability at temperatures ranging from -40 to 125°C.
SRN6045-220M
Bourns
Bourns SRN6045-220M is a shielded, surface mount inductor with 22uH nominal inductance and 1.5A max rated current. Ideal for power applications, it operates b/w -40 to 125°C with a self-resonance frequency of 11MHz.
LQM21DN150M70L
Murata Manufacturing
Murata Manufacturing's LQM21DN150M70L is an 0805 fixed inductor with 15uH nominal inductance, suitable for power applications. It has a max operating temperature of 125°C, rated current of 0.25A, and self-resonance frequency of 24MHz. This shielded SMT inductor features dual-ended terminals and ferrite core material.
NLV25T-R47J-PF
TDK
NLV25T-R47J-PF by TDK is a 1008-sized fixed inductor with 0.47uH nominal inductance, suitable for RF applications. Featuring dual-ended terminals and magnetic shielding, it operates at -40 to 105°C with a max current of 0.35A. Ideal for general purpose use, this SMT inductor has a self-resonance frequency of 350MHz and DC resistance of 0.68 ohm.
B82479A1105M000
The TDK B82479A1105M000 is a surface mount fixed inductor with 1000uH nominal inductance, suitable for power applications. It has a max rated current of 0.56A and operates b/w -55°C to 150°C. The inductor features dual-ended terminals, ferrite core material, and comes in a rectangular package measuring 18.54mm x 15.24mm x 7.11mm (LxWxH).
LQM21PHR47NG0D
Murata Manufacturing's LQM21PHR47NG0D is an 0805 SMT fixed inductor with 0.47uH nominal inductance, 1.3A max current, and -55 to 150°C operating temp. Ideal for power applications, it features dual-ended terminals and ferrite core material.
DRA124-2R2-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Maximum Operating Temperature: 165 Cel;
B82477G4105M000
The TDK B82477G4105M000 is a shielded, surface mount fixed inductor with 1000uH nominal inductance. Ideal for power applications, it has a max rated current of 0.55A and operates b/w -55°C to 125°C. With a compact size of 12.8mm x 12.8mm x 8mm, it is a general-purpose inductor suitable for various electronic devices.
HCF1007-3R3-R
Eaton Corporation
HCF1007-3R3-R by Eaton Corp is a surface mount fixed inductor with 3.3uH nominal inductance, 0.0075 ohm DC resistance, and 10% tolerance. It is a general purpose power inductor suitable for applications requiring a max operating temperature of 125°C and min of -40°C. The rectangular package with ferrite core and wraparound terminals make it ideal for various electronic devices.
PE-54036NL
Pulse Electronics
PE-54036NL by Pulse Electronics is a fixed inductor with 168uH nominal inductance, 1.81A max rated current, and -40 to 130°C operating temperature range. Ideal for power applications, this toroid-shaped inductor features radial terminals and a simple switcher design.
NRS5030T4R7MMGJV
Taiyo Yuden's NRS5030T4R7MMGJV is a surface mount fixed inductor with 4.7uH nominal inductance and 2.6A max rated current. Ideal for power applications, it features dual-ended terminals, ferrite core material, and operates b/w -40 to 125°C temperatures.
B82422-A1104-K100
Siemens
Siemens B82422-A1104-K100 is a surface mount RF inductor with 100uH nominal inductance, 0.065A max current, and 27 min quality factor at 0.1MHz. It is a general purpose inductor with ferrite core, suitable for various applications requiring high-frequency performance.
SD53-101-R
Eaton Corporation's SD53-101-R is a shielded fixed inductor with 100uH nominal inductance, 0.801 ohm DC resistance, and 0.45A max rated current. Ideal for general purpose applications, this SMT component features dual-ended terminals and operates b/w -40°C to 125°C.
36502C22NJTDG
TE Connectivity
TE Connectivity's 36502C22NJTDG is a surface mount fixed inductor with 0.022 uH nominal inductance, suitable for RF applications. With dual-ended terminals and a max rated current of 1 A, it offers high quality factor at 55 min. Its compact rectangular package measures 2.92mm x 2.79mm x 2.1mm, making it ideal for general purpose inductor needs.
SRP1038A-470M
Bourns SRP1038A-470M is a shielded, dual-ended SMT inductor with 47uH nominal inductance and 3A max rated current. Ideal for power applications, it operates b/w -55 to 150°C with a self-resonance frequency of 5MHz. AEC-Q200 compliant, this general-purpose inductor offers high quality factor and wraparound terminals.
LPS4018-472MRC
Coilcraft
Coilcraft's LPS4018-472MRC is a shielded, dual-ended fixed inductor with 4.7uH nominal inductance and 1.8A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a compact SMT package measuring 3.9mm x 3.9mm x 1.7mm.
B78108S1222K000
B78108S1222K000 by TDK is a 2.2uH general purpose inductor with 1A max current, 140MHz self-resonance freq, and -55 to 125°C operating temp range. Ideal for RF applications due to its high Q factor at 7.96MHz, this axial inductor features a tubular package design with tin finish terminals.
SRU1038-3R5Y
Bourns SRU1038-3R5Y is a shielded SMT inductor with 3.5uH nominal inductance, 5.5A max current, and 35MHz self-resonance freq. Ideal for power applications due to its general purpose design, ferrite core material, and compact rectangular package measuring 10x10x3.8mm.
24221
C&d Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
DRA74-470-R
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Manufacturer Series: DRA;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SRR0604-101KL
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
SRR0603-220ML
Bourns SRR0603-220ML is a shielded, surface mount inductor with 22uH nominal inductance and 0.7A max current rating. Ideal for power applications, it features a ferrite core, 20% tolerance, and operates b/w -40°C to 125°C.
SRR0603-470KL
SRR0603-101KL
The Bourns SRR0603-101KL is a shielded, surface mount fixed inductor with 100uH nominal inductance and 1.5 ohm DC resistance. It is a general purpose inductor suitable for power applications, featuring a self-resonance frequency of 9MHz and operating temperature range from -40°C to 125°C.
SRR0603-4R7ML
SRR0805-2R2M
SRR0603-221KL
SRR0603-221KL by Bourns is a surface mount, shielded fixed inductor with a nominal inductance of 220 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.2 A and a self-resonance frequency of 5 MHz.
SRR0603-3R3ML
SRR0604-100ML
The Bourns SRR0604-100ML is a surface mount, shielded fixed inductor with dual-ended terminal placement. It has a nominal inductance of 10 uH and can handle a max rated current of 1.3 A. This general purpose inductor is commonly used for power applications.
SRR0805-102K
Bourns SRR0805-102K is a shielded fixed inductor with 1000uH nominal inductance, 125°C max operating temp, and 10% tolerance. Ideal for power applications, it features dual-ended terminals, matte tin finish over nickel, and ferrite core material.
SRR0805-120M
SRR0805-150M
SRR0603-681KL
SRR0906-103YL
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 8; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
SRR0603-100ML
Bourns SRR0603-100ML is a shielded fixed inductor with 10uH nominal inductance, 1.1A max current, and 25MHz self-resonance freq. Ideal for power applications, it's a surface mount component with dual-ended terminals and ferrite core material.
SRR0604-680KL
SRR0604-6R8ML
SRR0603-330KL
Bourns SRR0603-330KL is a shielded, surface mount fixed inductor with 33uH nominal inductance. Ideal for power applications, it has a max rated current of 0.6A and operates b/w -40°C to 125°C. Its compact size (6.5mm x 6.5mm x 3.1mm) makes it suitable for various general purpose inductor needs.
SRR0604-4R7ML
SRR0604-471K
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved