Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DATA LINE FILTER; Maximum DC Resistance: .35 ohm; Rated Current: .35 A; No. of Terminals: 4; Output Impedance (ohm): 160 OHM; Mounting Type: SURFACE MOUNT;
Median Price
$0.280
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.168
1k+ parts
$0.165
10k+ parts
$0.122
DigiKey
$0.193
$0.158
$0.130
Cyclops Electronics Ltd (Excess)
-
Data Line Filters SRF2012-161YA attributes and parameters. Explore more Data Line Filters devices from Bourns
Maximum DC Resistance:
Filter Type:
Height:
Minimum Insulation Resistance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
SRF2012-161YA Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1552200253
Molex
WIRE AND CABLE;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Promax-johnton
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
Protek Devices
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Grande Electronics
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
BLM18SG221TN1D
Murata Manufacturing
Murata's BLM18SG221TN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. It offers a max DC resistance of 0.04 ohm and output impedance of 220 ohm at frequencies ranging from 100 MHz. This ferrite chip filter, measuring L1.6xB0.8xH0.5 mm, is ideal for surface mount applications in electronic circuits requiring noise suppression and signal filtering capabilities.
ILHB0603120+/-25%
Vishay Intertechnology
Vishay Intertechnology's ILHB0603120+/-25% is a FERRITE CHIP filter with 120 OHM output impedance, suitable for data line applications. With dimensions of L1.6xB0.8xH0.8 mm and rated current of 2A, it operates b/w -55 to 125 °C, making it ideal for surface mount installations requiring low DC resistance (0.1 ohm).
BKP2125HS221-T
Taiyo Yuden
BKP2125HS221-T by Taiyo Yuden is a 0805 multilayer chip data line filter with 2 terminals. It operates b/w -55 to 85 °C, has a DC resistance of 0.05 ohm, and an output impedance of 220 OHM. Ideal for applications requiring noise suppression in circuits up to 100 MHz frequency range.
ACH4518-333-TD01
TDK
TDK ACH4518-333-TD01 is a FERRITE CHIP filter with 25 dB attenuation at 60 MHz. It has a rated voltage of 50 V, insulation resistance of 1000 Mohm, and operates b/w -25 to 85 °C. Ideal for data line filtering in surface mount applications due to its compact L4.5XB1.8XH3.2 (mm) size and high capacitance of 33000 uF.
ILHB0805ER121V
Vishay Dale
FERRITE CHIP; Maximum DC Resistance: .03 ohm; Rated Current: 5 A; Additional Features: NICKEL BARRIER PLATING VIRTUALLY ELIMINATES SILVER MIGRATION; Output Impedance (ohm): 120 OHM; No. of Functions: 1;
FBMJ3216HS800-T
Taiyo Yuden's FBMJ3216HS800-T is a 1206 chip bead filter with 2 terminals. It operates b/w -40°C to 85°C, offering an output impedance of 80 ohm at 100 MHz frequency. Ideal for data line filtering applications due to its compact dimensions and high rated current of 4A.
MPZ2012S300AT000
TDK's MPZ2012S300AT000 is a chip bead data line filter with 2 terminals. It operates b/w -55°C to 125°C, offering a max DC resistance of 0.01 ohm and output impedance of 30 ohm at 100 MHz. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.
BK2125HS470-T
The Taiyo Yuden BK2125HS470-T is a chip bead data line filter with 2 terminals, rated for 1000V and operating b/w -55 to 125°C. With dimensions of L2.0xB1.25xH0.85 mm, it offers a max DC resistance of 0.05 ohm and output impedance of 47 ohm at 100 MHz, suitable for surface mount applications in electronic devices.
MPZ1608B471AT
The TDK MPZ1608B471AT is a 0603 chip bead data line filter with 2 terminals. It operates b/w -55°C to 125°C, has a DC resistance of 0.15 ohm, and an output impedance of 470 ohm. Ideal for surface mount applications in electronic devices requiring noise suppression at frequencies up to 100 MHz.
BLM18AG601SN1D
Murata's BLM18AG601SN1D is a chip bead data line filter with 2 terminals, rated for 0.5A current and 600 ohm output impedance. It operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.6xB0.8xH0.8 mm.
SRF3216-102Y
Bourns SRF3216-102Y is a data line filter with 2 functions, rated voltage of 50V, and max operating temperature of 125°C. It has min insulation resistance of 10 Mohm and DC resistance of 1 ohm. Ideal for applications requiring filtering in compact spaces with surface mounting type.
MMZ1608Y152BTD25
TDK's MMZ1608Y152BTD25 is a chip bead data line filter with 2 terminals. It offers a max operating temperature of 125°C and min of -55°C. With an output impedance of 1500 ohms, it is ideal for surface mount applications in automotive electronics.
BLM31AF700SN1L
Murata Manufacturing's BLM31AF700SN1L is a Ferrite Chip Data Line Filter with 2 terminals, 70 Ohm output impedance, and 0.15 ohm max DC resistance. It operates b/w -55°C to 125°C, suitable for surface mount applications in various electronic devices requiring noise suppression.
BNX012-01
Murata Manufacturing's BNX012-01 is a data line filter with 2 functions and rated voltage of 50V. With max insertion loss of 40dB, it operates b/w -40 to 125 °C. Ideal for applications requiring high insulation resistance and output impedance of 50 OHM.
DLP31SN551ML2L
Murata Manufacturing's DLP31SN551ML2L is a data line filter with 2 functions, rated at 16V and 0.1A. It offers an output impedance of 550 ohms and operates b/w -40°C to 85°C. Ideal for applications requiring high insulation resistance and surface mount installation.
PA4339.101NLT
Pulse Electronics
PA4339.101NLT by Pulse Electronics is a Data Line Filter with 2 functions, AEC-Q200 screening level, and 80V rated voltage. It has an inductance of 1.8uH and can handle up to 9A current. Ideal for applications requiring noise filtering in automotive electronics due to its compact size and high impedance output.
LI0603D301R-10
Steward
FERRITE CHIP; Maximum DC Resistance: .35 ohm; Rated Current: .4 A; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Minimum Operating Temperature: -55 Cel; JESD-609 Code: e3;
NFM18PC105R0J3D
Murata Manufacturing's NFM18PC105R0J3D is a FEED THROUGH CAPACITOR with 500 Mohm Min Insulation Resistance, 6.3V Rated Voltage, and 1000000uF Capacitance. Ideal for data line filtering applications due to its compact L1.6XB0.8XH0.8 (mm) size and surface mounting type.
P0429NLT
Pulse Electronics P0429NLT is a data line filter with 2 functions, AEC-Q200 screening level. It has inductance of 810uH, rated current of 9.7A, and max operating temp of 120°C. Ideal for automotive applications due to its surface mounting type and compact dimensions (L30.99xB25.4xH12.7 mm).
LI0805H121R-10
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .8 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved