Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's BLM15AX601SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a DC resistance of 0.34 ohm and output impedance of 600 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications, this ferrite chip filter is designed to handle up to 0.5A current in various electronic devices.
Median Price
$0.020
Lifecycle Status
Suppliers In-Stock
39
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.100
100+ parts
$0.035
1k+ parts
$0.024
10k+ parts
$0.018
Mouser Electronics
$0.014
Avnet
-
TTI
Element14
$0.031
$0.027
$0.017
Arrow
Verical
Chip1Stop
$0.025
$0.012
$0.009
Farnell
$0.029
$0.022
TTI Europe
$0.008
Newark
Future Electronics
$0.048
RS (Exports)
Nova Conductors
Maritex
$0.061
$0.013
$0.007
$0.005
Bristol Electronics
$0.083
$0.041
$0.010
Component Electronics Inc.
$0.150
$0.120
IBS Electronics
$0.381
$0.068
Component Sense
NAC Semi
Vyrian
Chip Stock
Rutronik
Sensible Micro Corp
PC Components Company LLC
Dan-Mar Components
Prism Electronics
Connector Distribution Corp
Right Parts Inc.
ACDS - Activité Composants Distribution Service
North Shore Components
VNN
Speed Components Ltd
Semtec, LLC
ComSIT Distribution GmbH
EPE Components Inc.
Cyclops Electronics Ltd
BCID Electronics Ltd.
Bas Electronics GmbH & Co. KG
Semicontronic
Argo Parts USA
$0.021
Modulus Dynamics
Corohmni
Advanced Electronics
$0.028
$0.026
CoreStaff
$0.066
$0.033
Aztec Data Supply Inc.
$0.500
Eastek
Abacus Technologies
Perfect Parts
GreenTree Electronics
Glotronic Ltd.
Continental Prestige Electronics
$0.011
iodParts Technologies Inc.
Authorized Procurement Solutions
Assy Fe
Kepictronics
Allen Electronics Distributors
Cyclops Electronics Ltd (Excess)
Alle Elektronik GmbH
Futuretech Components
Robosynatics
Lucentia Tech
XScomponents
$0.030
Chip bead construction helps in reducing electromagnetic interference and noise in data lines.
Having 2 terminals allows for easy connection in the circuit, making installation simpler.
Being able to withstand high temperatures ensures reliable performance in various environments.
Having a low minimum operating temperature allows for usage in colder conditions.
The compact width of 0.5mm makes this filter suitable for small electronic devices with limited space.
Having a minimum frequency of 100 MHz ensures effective filtration of unwanted frequencies in data lines.
Low DC resistance helps in maintaining signal integrity and reducing power losses in the circuit.
Surface mounting type allows for easy installation on PCBs, saving space and simplifying assembly.
With a rated current of 0.5 A, this filter can handle moderate current loads in data lines.
Ferrite material provides high magnetic permeability, making the filter effective in suppressing electromagnetic interference.
Data Line Filters BLM15AX601SN1D attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
JESD-609 Code:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
Width (mm):
BLM15AX601SN1D Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
1N4148WS
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
CRCW040210K0FKED
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
7448261418
Wuerth Elektronik & Kg
Wurth Elektronik 7448261418 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 1800uH. It operates b/w -40 to 125°C, has a max DC resistance of 0.0079 ohm, and can handle up to 14A current. Ideal for applications requiring noise suppression in data lines.
7427927115
Wurth Elektronik 7427927115 is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L1.0xB0.5xH0.5 (mm), it is ideal for surface mount applications in electronics to achieve an output impedance of 150 ohms.
DSS1NB32A103Q91A
Murata Manufacturing
Murata Manufacturing's DSS1NB32A103Q91A is a 3-terminal data line filter with 1000 Mohm insulation resistance, 100 V rated voltage, and 6 A rated current. It operates b/w -40 to 85 °C and has a capacitance of 10000 uF. Ideal for applications requiring noise suppression in data lines.
ILHB1206ER601V
Vishay Intertechnology's ILHB1206ER601V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.1 ohm, and output impedance of 600 OHM. Ideal for surface mount applications in electronics requiring noise suppression at frequencies up to 100 MHz.
320-0548
C & K Components
The C & K Components 320-0548 is a UL-approved data line filter with 2 functions and 11 terminals. Featuring an inductance of 3800 uH, it has a max DC resistance of 0.21 ohm. This filter, measuring 31.75mm in width and 35.56mm in length, is ideal for applications requiring a rated current of 1.25A such as data transmission systems.
CM1422-03CP
California Micro Devices
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Output Impedance (ohm): 50 OHM; Manufacturer Series: CM1422; Capacitance: 15 uF; Dimensions: L4.045XB1.503XH0.714 (mm)/L0.159XB0.059XH0.028 (inch);
7427512
Wurth Elektronik 7427512 is a chip bead data line filter with 3 functions. It operates b/w -40 to 125°C, has an output impedance of 580Ω, and rated current of 5A. Used in surface mount applications for filtering frequencies from 25-100MHz in electronic circuits.
744273801
Wurth Elektronik 744273801 is a Data Line Filter with 2 functions, rated at 80V. It has an inductance of 9uH and operates b/w -40 to 125°C. Ideal for applications requiring filtering of data lines, it offers low DC resistance of 0.011 ohm and output impedance of 800 OHM.
B82790-S513-N201
TDK B82790-S513-N201 is a 2-function data line filter with 80V rated voltage and 51uH inductance. Ideal for applications requiring a compact surface-mount solution, it offers low DC resistance of 0.14 ohm and output impedance of 50 ohm.
74279277
Wurth Elektronik 74279277 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.0XB0.5XH0.5 mm and output impedance of 70 OHM. Rated current is 0.5 A, making it ideal for surface mount installations in the frequency range of 100-500 MHz.
MH2029-301Y
Bourns
Bourns MH2029-301Y is a chip bead data line filter with 2 terminals. It offers 0.2 Mohm min insulation resistance, 100 MHz min frequency, and 1 A rated current. Ideal for applications requiring surface mount filters in compact dimensions like L2.0XB1.2XH0.9 (mm).
FBMH3216HM221NT8
Taiyo Yuden
Taiyo Yuden's FBMH3216HM221NT8 is a Ferrite Chip Data Line Filter with 2 terminals, rated for 4A current. It offers an output impedance of 220 ohms, operates b/w -40°C to 125°C, and has a max DC resistance of 0.02 ohm. Ideal for surface mount applications requiring noise suppression in data lines.
7122-RC
The Bourns 7122-RC Data Line Filter has 2 functions, 4 terminals, and inductance of 25500 uH. With UL approval, it operates b/w -55°C to 105°C. Ideal for applications requiring a max current of 4A such as data line filtering.
ACM2012-900-2P-TL002
TDK's ACM2012-900-2P-TL002 is a FERRITE CHIP filter with 10 Mohm insulation resistance, 50V rated voltage, and 90 OHM output impedance. Ideal for data line filtering applications due to its compact dimensions of L2.0XB1.2XH1.2 (mm) and surface mounting type.
74270054
FERRITE BEAD;
ILHB0805ER251V
Vishay Intertechnology's ILHB0805ER251V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.04 ohm, and output impedance of 250 OHM. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
BL01RN1A1F1J
Murata Manufacturing's BL01RN1A1F1J is a data line filter with a ferrite bead filter type. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This through-hole mount filter has dimensions of D3.6XH5.0 (mm) and is suitable for applications requiring a rated current of 6 A.
MPZ2012S102ATD25
TDK's MPZ2012S102ATD25 is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and 1000 ohm output impedance. Operating b/w -55°C to 125°C, it is ideal for data line filtering in surface mount applications.
BLM21PG121SN1D
Murata Manufacturing's BLM21PG121SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. With a DC resistance of 0.03 ohm and output impedance of 120 OHM, it's ideal for data line filtering applications at frequencies ranging from 100 MHz.
BLM21SP601SH1D
Murata Manufacturing's BLM21SP601SH1D is a FERRITE CHIP filter with 2 terminals, AEC-Q200 compliant. With max temp of 125°C and min of -55°C, it has DC resistance of 0.06 ohm. Ideal for data line filtering applications due to its 600 OHM output impedance and rated current of 1.5A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BLM18PG121SN1D
Murata's BLM18PG121SN1D is a chip bead data line filter with 2 terminals, rated for 2A current. It operates b/w -55°C to 125°C, offering 120 ohm impedance at 100MHz frequency. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering.
BLM18AG102SN1D
Murata Manufacturing's BLM18AG102SN1D is a chip bead data line filter with 2 terminals, rated for 0.4A current. With dimensions of 1.6x0.8x0.8mm, it operates b/w -55°C to 125°C and offers an output impedance of 1000Ω at frequencies up to 100MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
BLM18PG471SN1D
BLM18PG471SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines.
BLM15AG121SN1D
Murata Manufacturing's BLM15AG121SN1D is a 0402 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. With a DC resistance of 0.19 ohm, it offers an output impedance of 120 OHM at a frequency range of 100 MHz. Ideal for data line filtering applications due to its compact size and surface mounting type.
BLM18HE152SN1D
BLM18HE152SN1D by Murata is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. It offers a DC resistance of 0.5 ohm, output impedance of 1500 ohm, and rated current of 0.4 A. Ideal for applications requiring surface mount filters in the frequency range of 100-1000 MHz.
BLM18AG601SN1D
Murata's BLM18AG601SN1D is a chip bead data line filter with 2 terminals, rated for 0.5A current and 600 ohm output impedance. It operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.6xB0.8xH0.8 mm.
BLM18AG121SN1D
Murata Manufacturing's BLM18AG121SN1D is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and matte tin finish. It operates b/w -55°C to 125°C, has a DC resistance of 0.18 ohm, and output impedance of 120 OHM. Ideal for surface mount applications in filtering data lines up to 100 MHz frequency range.
BLM18EG221SN1D
Murata Manufacturing's BLM18EG221SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 1000 MHz and DC resistance of 0.05 ohm. Ideal for surface mount applications in filtering data lines with an output impedance of 260 ohm at frequencies ranging from 100 MHz to 1000 MHz.
BLM18PG600SN1D
Murata Manufacturing's BLM18PG600SN1D is a chip bead data line filter with 2 terminals, operating from -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.1 ohm and output impedance of 60 ohm at frequencies up to 100 MHz. Ideal for surface mount applications, this ferrite chip filter is designed to handle up to 0.5A rated current in various electronic circuits.
BLM18PG300SN1D
BLM18PG300SN1D by Murata is a chip bead data line filter with 2 terminals, rated current of 1A, and output impedance of 30 ohm. It operates b/w -55 to 125 °C and has dimensions of L1.6xB0.8xH0.8 mm. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
BLM15AG100SN1D
Murata BLM15AG100SN1D is a chip bead data line filter with 2 terminals, rated for 1A current. It offers a DC resistance of 0.025 ohm and output impedance of 10 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications in electronics to suppress noise and interference.
BLM18SG121TN1D
Murata Manufacturing's BLM18SG121TN1D is a chip bead data line filter with 2 terminals, rated for 3A current. It operates b/w -55°C to 125°C, offering 120 ohm output impedance at 100MHz frequency. Ideal for surface mount applications requiring effective filtering in compact spaces.
BLM15AG221SN1D
Murata's BLM15AG221SN1D is a 0402 chip bead filter with 220 ohm output impedance, 0.29 ohm DC resistance, and 0.45 A rated current. It operates b/w -55 to 125 °C and is ideal for data line filtering applications due to its ferrite construction and surface mounting type.
BLM18PG181SN1D
Murata Manufacturing's BLM18PG181SN1D is a chip bead data line filter with 2 terminals, rated for 1.5A current and 180 ohm output impedance. It operates b/w -55°C to 125°C, ideal for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.6xB0.8xH0.8 mm.
BLM15AG601SN1D
Murata Manufacturing's BLM15AG601SN1D is a 0402 chip bead filter with 2 terminals. It operates b/w -55 to 125°C, has a DC resistance of 0.52 ohm, and output impedance of 600 ohm. Ideal for data line filtering applications due to its compact size (L1.0xB0.5xH0.5 mm) and rated current of 0.3 A.
BLM18EG601SN1D
Murata's BLM18EG601SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.35 ohm, output impedance of 700 OHM, and rated current of 0.5 A. Ideal for surface mount applications in filtering frequencies from 100 MHz to 1000 MHz.
BLM18KG601SN1D
Murata Manufacturing's BLM18KG601SN1D is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and 0.8mm width. Operating b/w -55 to 125 °C, it has a DC resistance of 0.15 ohm and output impedance of 600 OHM. Ideal for surface mount applications in electronics for noise suppression at frequencies ranging from 100 MHz.
BLM15AG102SN1D
Murata Manufacturing's BLM15AG102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L1.0XB0.5XH0.5 (mm), it offers a max frequency of 100 MHz and DC resistance of 0.65 ohm, suitable for surface mount applications in electronics for impedance matching and noise suppression.
BLM18HE102SN1D
BLM18HE102SN1D by Murata is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 1000 MHz and DC resistance of 0.35 ohm. Ideal for surface mount applications in electronics requiring impedance matching up to 1000 OHM at frequencies ranging from 100 MHz to 1000 MHz.
BLM15HG102SN1D
Murata Manufacturing's BLM15HG102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a DC resistance of 1.1 ohm and an output impedance of 1000 ohm for frequencies ranging from 100MHz to 1000MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved