Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns SF-1206S075M-2 fuse, rated at 0.75A and 63V DC, features slow blow characteristic with trip time of 0.05s. With dimensions of 3.2mm x 1.6mm x 0.97mm, it is ideal for circuit protection in electronics requiring surface mount fuses with UL standard compliance.
Median Price
$0.386
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Arrow
1+ parts
$0.193
100+ parts
$0.184
1k+ parts
$0.175
10k+ parts
-
Newark
$0.632
Farnell
$0.507
$0.415
$0.351
Element14
$0.743
$0.636
$0.586
Verical
Chip1Stop
$0.266
Nova Conductors
Ampacity Inc.
$0.149
Advanced Electronics
$2.074
$1.887
$1.701
Continental Prestige Electronics
$0.334
$0.310
$0.306
Aranea Global
Provides excellent protection against overcurrent conditions and helps prevent damage to the circuit.
Quick trip time ensures rapid interruption of circuit in case of overcurrent events, offering effective protection to the connected components.
Compact body size allows for space-saving installation in various electronic devices and applications.
Suitable for low to moderate current applications, providing precise protection against overcurrent events within the rated current range.
Can operate efficiently in high-temperature environments without compromising its performance or safety features.
The slow blow characteristic ensures that the fuse can withstand temporary current surges without blowing, making it suitable for applications with intermittent high current requirements.
Surface mount design simplifies installation process and allows for easy integration into circuit boards or electronic assemblies.
Fuses SF-1206S075M-2 attributes and parameters. Explore more Fuses devices from Bourns
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated DC Voltage:
Minimum Pre Arcing Time:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Mounting Feature:
Packing Method:
SF-1206S075M-2 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
NE555D
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Kingwell Technonlogy
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Meritek Electronics
0451002.MRL
Littelfuse
Littelfuse 0451002.MRL Nano fuse with 2A current, 125V rated voltage, and 0.53J joule integral. Ideal for circuit protection in electronics due to very fast blow characteristic and surface mounting feature. Compliant with CE, CSA, CUL, PSE, TUV, UL standards.
AGU-40
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 40 A; Terminal Shape: END CAP; Packing Method: BOX;
0297015.H
Littelfuse 0297015.H is a MINI fuse with 15A rated current, 32V DC voltage, and 308J nominal joule integral. It has a trip time of 0.03s and is ideal for circuit protection in automotive applications due to its compact size and high breaking capacity.
0259001T
Littelfuse 0259001T fuse has a rated current of 1A and nominal joule integral of 0.01J. With a rated AC voltage of 125V, it is ideal for circuit protection in applications requiring electric fuses. This through-hole mounted fuse operates b/w -55°C to 90°C, with a rated breaking capacity of 50A.
LPJ-100SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE;
0239001.MXP
Littelfuse 0239001.MXP fuse, rated at 1A and 250V, offers a time lag blow characteristic with trip delay of 120s. With dimensions of 5x20mm and nickel terminal finish, it is ideal for circuit protection in applications requiring supplemental fuses with a rated breaking capacity of 35A.
0466.750NR
Littelfuse 0466.750NR is a 1206 size fuse with 0.75A rated current and 63V rated voltage. It offers very fast blow characteristic, 0.2s trip time, and 0.0276J nominal joule integral. Ideal for electric circuit protection in applications requiring surface mount fuses with CSA and UL standards compliance.
NON-40
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 40 A; Terminal Shape: END CAP;
DMM-B-11A
DMM-B-11A by Cooper Industries is a 10mm x 38.1mm fuse with a rated current of 11A and a blow characteristic of fast. It is used for circuit protection in applications requiring a rated AC voltage of 1000V and a rated DC voltage of 1000V, with a rated breaking capacity of 20000A at 1000VDC.
LPJ-400SP
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 400 A; Terminal Shape: TAB/BLADE;
ANN-80
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 80 V; Rated Current: 80 A; Terminal Shape: TAB/BLADE;
LP-CC-3-2/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2.2 A; Terminal Shape: END CAP;
AJT200EI
Mersen S A
Mersen S A's AJT200EI fuse, rated 200A and 600V AC/500V DC, features time delay blow characteristic. With TAB/BLADE terminals and dimensions of 82.2mm x 81.8mm, it offers circuit protection for high breaking capacity applications in line with UL standards.
LP-CC-3-1/2
Eaton Corporation
Eaton Corporation LP-CC-3-1/2 fuse, rated 3.5A and 600V AC, features time delay blow characteristic for electric circuit protection. With a rated breaking capacity of 200kA, it is suitable for inline mounting applications in CE, CSA, and UL standard compliant systems.
BK/ATC-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE;
FWP-400A
Eaton Corporation's FWP-400A fuse offers 31000 J nominal joule integral, 700 V AC/DC voltage rating, and 50000 A breaking capacity. Ideal for electric circuit protection in various applications due to its inline/holder mounting feature and compliance with CE, CSA, and UL standards.
FNQ-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: .5 A; Terminal Shape: END CAP; Terminal Finish: NICKEL;
BK/ATM-5
The Eaton Corporation BK/ATM-5 fuse is a 5A electric fuse with fast blow characteristic. It has dimensions of 10.92mm x 3.81mm x 8.81mm and rated voltage of 32V, suitable for inline mounting applications. With UL reference standard, it offers circuit protection with a rated breaking capacity of 1000A at temperatures ranging from -40°C to 100°C.
AJT600N
AJT600N fuse by Mersen S A is a 600V, 600A time delay electric fuse with a rated breaking capacity of 200kA. Measuring 64mm in diameter and 203mm in height, it features TAB/BLADE terminals for inline mounting applications. Compliant with CSA, IEC, and UL standards, it's ideal for high-voltage circuit protection needs.
LP-CC-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 10 A; Terminal Shape: END CAP;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SF-1206F250-2
Bourns
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 2.5 A; Terminal Shape: WRAPAROUND; JESD-609 Code: e3;
SF-1206S050-2
SF-1206S050-2 by Bourns is a 1206 size surface mount fuse with a rated current of 0.5A and max operating temperature of 105°C. It is commonly used for circuit protection in electronic devices.
SF-1206S700-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 7 A; Terminal Shape: WRAPAROUND; Blow Characteristic: SLOW;
SF-1210S150W-2
Bourns SF-1210S150W-2 fuse with 1.5A current, 125V AC voltage, and 0.5J joule integral. Ideal for circuit protection in electronics due to slow blow characteristic and UL reference standard compliance. Dimensions of 3.2mm x 2.5mm x 1.6mm make it suitable for surface mount applications.
SF-1206S100-2
Bourns SF-1206S100-2 fuse, rated 1A with 50A breaking capacity, features slow blow characteristic and trip time of 5s. Sized at 3.1mm x 1.55mm x 0.6mm, it is ideal for electric circuit protection in applications requiring UL standard compliance and surface mounting feature.
SF-1206S200M-2
Bourns SF-1206S200M-2 fuse, rated 2A with 50A breaking capacity, features slow blow characteristic and UL reference standard. Ideal for electric circuit protection in applications requiring surface mounting method. Compact size of 3.2mm x 1.6mm x 0.97mm makes it suitable for various electronic devices.
SF-1206SP700-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 7 A; Terminal Shape: WRAPAROUND; Reference Standard: UL;
SF-1206F700-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 7 A; Terminal Shape: WRAPAROUND; Terminal Finish: TIN;
SF-1206HV25M-2
Bourns SF-1206HV25M-2 fuse, 3.2mm x 1.6mm x 0.97mm, rated at 35V DC with a breaking capacity of 200A. Ideal for circuit protection in electronics due to its UL standard compliance and surface mount feature. Operating temperature range from -55°C to 125°C ensures reliable performance in various environments.
SF-1206SP600M-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 24 V; Rated Current: 6 A; Terminal Shape: WRAPAROUND; Nominal Joule Integral: 8.59 J;
SF-1206F100-2
Bourns SF-1206F100-2 fuse, rated 1A with 50A breaking capacity, features fast blow characteristic and trip time of 60s. Ideal for electric circuit protection in applications requiring surface mount fuses with dimensions of 3.1mm x 1.55mm x 0.6mm.
SF-1206S200-2
Bourns SF-1206S200-2 fuse, rated 2A with slow blow characteristic, has dimensions of 3.1mm x 1.55mm x 0.6mm and operates b/w -20 to 105 °C. Suitable for circuit protection in UL standard applications, it offers a rated DC voltage of 63V and a nominal Joule integral of 0.339J within a surface mount package.
SF-1206S300-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND; Rated Breaking Capacity: 50 A;
SF-1206S200W-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 65 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND; Body Length/Diameter: 3.2 mm;
SF-1206HI800M-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 24 V; Rated Current: 8 A; Terminal Shape: WRAPAROUND; Packing Method: TR, 7 INCH;
SF-1206S500-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: WRAPAROUND; Body Length/Diameter: 3.1 mm;
SF-1206S150-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 63 V; Rated Current: 1.5 A; Terminal Shape: WRAPAROUND; Body Width: 1.55 inch;
SF-1206HV40M-2
Bourns SF-1206HV40M-2 fuse, 3.2mm x 1.6mm x 1.3mm, rated at 35V DC with a breaking capacity of 200A. Ideal for circuit protection in applications requiring a surface mount fuse with a nominal joule integral of 240J and UL reference standard compliance.
SF-1206SA200W-2
Bourns SF-1206SA200W-2 fuse, rated 2A with 110V DC voltage, features slow blow characteristic and 0.88J nominal joule integral. Ideal for electric circuit protection in automotive applications due to AEC-Q200 and UL standards compliance.
SF-1206F050-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 63 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND; Minimum Operating Temperature: -20 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved