Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Bourns MH2029-300Y is a chip bead data line filter with 2 terminals, rated for 3A current. Featuring ferrite construction, it offers 30Ω output impedance and operates b/w -55°C to 125°C. Ideal for applications requiring noise suppression in high-frequency circuits up to 100MHz.
Median Price
$0.044
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Distrelec
1+ parts
$0.054
100+ parts
$0.032
1k+ parts
$0.022
10k+ parts
-
Mouser Electronics
$0.100
$0.052
$0.035
$0.025
DigiKey
$0.051
Adafruit Industries
$1.533
$1.395
$1.257
Arrow
$0.021
Verical
Newark
$0.040
Chip1Stop
$0.049
$0.033
$0.028
Element14
$0.029
TTI
$0.024
Nova Conductors
$0.030
Maritex
$0.041
TME
$0.090
$0.023
Chip Stock
Vyrian
Electro Sonic
$0.027
IBS Electronics
$0.031
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Prism Electronics
Bristol Electronics
Goldney Electronics S.L.
Semicontronic
$0.014
Ampacity Inc.
Argo Parts USA
Netroflash
Advanced Electronics
Aztec Data Supply Inc.
$1.958
Corohmni
$3.136
Perfect Parts
Metaverse IC Inc.
Continental Prestige Electronics
$0.026
iodParts Technologies Inc.
$0.045
Authorized Procurement Solutions
High minimum insulation resistance ensures reliable performance and prevents leakage of current.
Chip bead construction offers compact size and high efficiency in filtering out electromagnetic interference.
Having 2 terminals simplifies the installation process and ensures secure connections.
Standard case code makes it compatible with a wide range of circuit designs.
Ferrite chip filters provide excellent EMI suppression and noise reduction capabilities.
High maximum operating temperature allows for reliable performance even in harsh environments.
Wide operating temperature range makes this filter suitable for use in both extreme cold and hot conditions.
Matte tin over nickel finish ensures long-term corrosion resistance and secure electrical connections.
Compact width allows for easy integration into circuit boards with limited space.
Effective filtering at low frequencies ensures reliable signal transmission and reception.
Low DC resistance helps in minimizing power losses and maintaining signal integrity.
Small length ensures space-saving design and easy installation in compact electronic devices.
High maximum frequency rating ensures effective filtering across a wide range of frequencies.
Optimal output impedance for filtering out unwanted noise and interference in data lines.
Tape and reel packaging simplifies the handling and storage of multiple filters for manufacturing processes.
Surface mount design makes it easy to integrate this filter onto circuit boards without the need for additional mounting hardware.
Compact dimensions make this filter suitable for use in small electronic devices and applications.
High rated current ensures that this filter can handle heavy load currents without overheating or performance degradation.
Low profile design allows for easy integration into thin electronic devices and space-constrained applications.
Ferrite material provides excellent magnetic properties for effective noise suppression and EMI filtering.
Data Line Filters MH2029-300Y attributes and parameters. Explore more Data Line Filters devices from Bourns
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
Minimum Insulation Resistance:
JESD-609 Code:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
Width (mm):
MH2029-300Y Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Assembly/Origin - MH1608, MH2029, MH3261, MZ2029 Manufacturing Dec/2017
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Continental Device India
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DLP11SA900HL2L
Murata Manufacturing
Murata Manufacturing's DLP11SA900HL2L is a Data Line Filter with 2 functions, rated at 5V. It has a min insulation resistance of 100 Mohm and operates b/w -40 to 85 °C. Ideal for applications requiring filtering of data lines with dimensions of L1.25XB1.0XH0.82 (mm).
744822120
Wuerth Elektronik & Kg
The Wurth Elektronik 744822120 Data Line Filter has a rated voltage of 250V, inductance of 20000uH, and max operating temperature of 125°C. It is UL approved with 2 functions and suitable for applications requiring noise suppression in data lines.
BLM15BD102SN1D
Murata Manufacturing's BLM15BD102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a max frequency of 100MHz and DC resistance of 0.9 ohm. Ideal for surface mount applications in electronic devices requiring impedance matching and noise suppression up to 1000 ohm output impedance.
BKP1005HS121-TV
Taiyo Yuden
Taiyo Yuden's BKP1005HS121-TV is a FERRITE CHIP filter with 2 terminals, rated for 1A current. With dimensions of L1.0xB0.5xH0.5 (mm), it offers an output impedance of 120 ohm and max DC resistance of 0.14 ohm. Ideal for data line filtering applications, this surface mount device operates b/w -55 to 85 °C temperatures.
ACM2012-361-2P-T002
TDK
TDK's ACM2012-361-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 50V and 0.22A. With dimensions of L2.0XB1.2XH1.3 (mm), it offers insulation resistance of 10 Mohm for data line applications in temperatures ranging from -40 to 85 °C.
NFM18CC222R1C3D
Murata Manufacturing's NFM18CC222R1C3D is a data line filter with 1000 Mohm insulation resistance, 16V rated voltage, and 2200uF capacitance. It is a feed through capacitor suitable for applications requiring filtering of electrical signals in compact spaces.
SRF2012A-801Y
Bourns
Bourns SRF2012A-801Y is a data line filter with 2 functions, rated at 100V. It offers high insulation resistance of 10 Mohm and operates b/w -55 to 125 °C. Ideal for automotive applications due to AEC-Q200 screening level.
50105C
C&d Technologies
DATA LINE FILTER; Maximum DC Resistance: .3 ohm; Rated Current: .7 A; No. of Terminals: 4; Mounting Type: SURFACE MOUNT; Width (mm): 5.9;
742792062
Wurth Elektronik 742792062 is an 0805 multi-layer ferrite chip data line filter with dimensions of L2.0xB1.2xH0.9 (mm). It has a max operating temperature of 125°C and min frequency of 100 MHz, suitable for surface mount applications in electronic circuits requiring noise suppression up to 400 MHz.
MPZ1608S601ATD25
TDK's MPZ1608S601ATD25 is a FERRITE CHIP data line filter with 2 terminals. It operates b/w -55 to 125 °C, has a DC resistance of 0.15 ohm, and an output impedance of 600 OHM. Ideal for surface mount applications, it measures L1.6xB0.8xH0.8 mm and can handle a rated current of 1 A.
SRF0905-501Y
Bourns SRF0905-501Y is a 2-function data line filter with inductance of 500uH and rated current of 1A. It operates b/w -40 to 105°C, has a max DC resistance of 0.15 ohm, and output impedance of 1000 ohm. Ideal for surface mount applications in electronics for noise filtering and signal conditioning.
ECMF02-4CMX8
STMicroelectronics
STMicroelectronics ECMF02-4CMX8 is a DATA LINE FILTER with 2 functions and 8 terminals. It has a max operating temp of 125°C, DC resistance of 4 ohm, and output impedance of 50 OHM. Ideal for applications requiring data line filtering in compact spaces due to its small dimensions (2.55mm x 1.25mm x 0.6mm).
2508056017Y0
Fair-rite Products
Fair-rite Products' 2508056017Y0 is a chip bead data line filter with 2 terminals, ideal for surface mount applications. Featuring ferrite chip construction, it offers a frequency range of 100-1000 MHz and an output impedance of 600 ohm. With dimensions of L2.0xB1.25xH0.9 mm, it operates b/w -55 to 125 °C for noise suppression in electronic circuits.
MPZ2012S331AT000
The TDK MPZ2012S331AT000 is an 0805 chip bead data line filter with a max operating temperature of 125°C and min frequency of 100 MHz. With a DC resistance of 0.05 ohm, it is ideal for applications requiring noise suppression in electronic circuits. This surface mount filter has dimensions of L2.0xB1.25xH0.85 (mm) and is commonly used in telecommunications equipment.
BLM18RK601SN1D
Murata's BLM18RK601SN1D is a chip bead data line filter with 2 terminals, ideal for surface mount applications. Featuring a ferrite chip construction, it offers a max operating temperature of 125°C and DC resistance of 0.6 ohm. With dimensions of 1.6x0.8x0.8mm, this filter is suitable for maintaining an output impedance of 600 ohm at frequencies ranging from 100 MHz to TAPE AND REEL packaging method.
MPZ1608S221ATA00
The TDK MPZ1608S221ATA00 is a 0603 chip bead data line filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for surface mount applications, it provides an output impedance of 220 ohms and rated current of 2.2A in a compact size of L1.6xB0.8xH0.8 (mm).
ECLAMP2456P.TCT
Semtech
Semtech's ECLAMP2456P.TCT is a 5V data line filter with 6 functions and 12 terminals. It offers 40 dB attenuation at 2700 MHz, operating from -40 to 85°C. Ideal for applications requiring surface mount filters with dimensions of L3.1xB1.7xH0.65 mm in plastic packaging on tape and reel.
742792011
The Wurth Elektronik 742792011 is a multi-layer data line filter with FERRITE CHIP construction. It has 2 terminals, operates b/w -55 to 125 °C, and offers a max frequency of 1000 MHz. Ideal for applications requiring noise suppression in electronic circuits.
BLM18KG300TN1D
Murata Manufacturing's BLM18KG300TN1D is a 0603 chip bead filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for data line filtering applications, it has a DC resistance of 0.01 ohm and output impedance of 30 ohm.
NFM21PC474R1C3D
Murata Manufacturing's NFM21PC474R1C3D is a data line filter with 16V rated voltage, 470000uF capacitance, and 2A rated current. It features a feed through capacitor design for noise suppression in electronic circuits. Ideal for surface mount applications requiring high insulation resistance and low DC resistance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MH2029-221Y
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 2 A;
MH2029-301Y
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .2 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1 A;
MH2029-601Y
MH2029-101Y
Bourns MH2029-101Y is a chip bead data line filter with 2 terminals, rated for 2A current. Featuring ferrite construction, it offers 0.1 ohm DC resistance and 100 Ohm output impedance at 100 MHz frequency. Ideal for surface mount applications in electronics to ensure signal integrity and EMI suppression.
MH2029-070Y
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .03 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A;
MH2029-600Y
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .02 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 5 A;
MH2029-400Y
MH2029-401Y
MH2029-100Y
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .01 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 6 A;
MH2029-121Y
MH2029-151Y
MH2029-471Y
MH2029-800Y
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .04 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved