Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 2 A;
Median Price
$0.018
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.100
100+ parts
$0.051
1k+ parts
$0.035
10k+ parts
-
Mouser Electronics
$0.052
$0.025
Arrow
Verical
Chip1Stop
Inventory MP
Bristol Electronics
Ampacity Inc.
$0.015
Data Line Filters MH2029-151Y attributes and parameters. Explore more Data Line Filters devices from Bourns
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
Minimum Insulation Resistance:
JESD-609 Code:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
Width (mm):
MH2029-151Y Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Good-ark Electronics
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Taiwan Semiconductor
NFE61HT102F2A9L
Murata Manufacturing
Murata Manufacturing's NFE61HT102F2A9L is a Data Line Filter with 1000 Mohm Min Insulation Resistance, AEC-Q200 Screening Level, and 100 V Rated Voltage. It is ideal for applications requiring noise suppression in data lines, offering a compact size of L6.8xB1.6xH1.6 mm and rated current of 2 A.
NFM41PC155B1H3L
Murata Manufacturing's NFM41PC155B1H3L is a FERRITE CHIP data line filter with 100 Mohm insulation resistance, 50V rated voltage, and 6A rated current. It operates b/w -55°C to 85°C, measures L4.5xB1.6xH1.0 mm, and has a max DC resistance of 0.009 ohm. Ideal for surface mount applications requiring high capacitance filtering capabilities.
BNX024H01B
Murata Manufacturing's BNX024H01B is a 50V data line filter with 100 Mohm insulation resistance. AEC-Q200 screening level ensures high quality for automotive applications. With dimensions of L12.1xB9.1xH3.5 mm, it offers 15A rated current and 50 ohm output impedance for surface mount installation.
MH1608-601Y
Bourns
The Bourns MH1608-601Y is a chip bead data line filter with 2 terminals, offering 0.2 Mohm insulation resistance. With dimensions of 1.6x0.8x0.8mm, it operates b/w -55 to 125°C and has a max frequency of 100 MHz. Ideal for applications requiring a compact surface mount filter with an output impedance of 600 ohms.
7116
Jw Miller Magnetics
DATA LINE FILTER; Maximum DC Resistance: .6 ohm; Dimensions: L10.16XB5.08XH8.89 (mm)/L0.4XB0.2XH0.35 (inch); Width (mm): 5.08; Height: 8.89 mm; Length: 10.16 mm;
NFE61PT472C1H9L
Murata Manufacturing's NFE61PT472C1H9L is a 3-terminal data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 4700uF capacitance. It operates b/w -25°C to 85°C and is ideal for surface mount applications requiring noise filtering in data lines.
BLM21PG331SN1
Murata Manufacturing's BLM21PG331SN1 is a Ferrite Chip Data Line Filter with 330 Ohm Output Impedance, 1.5A Rated Current, and -55 to 125°C Operating Temperature range. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
HI1812V101R-10
Laird Technologies
HI1812V101R-10 by Laird Technologies is a chip bead data line filter with 2 terminals. It operates b/w -40 to 125 °C and has a DC resistance of 0.007 ohm. With dimensions of L4.5XB3.2XH1.4 (mm), it's ideal for applications requiring filtering in the frequency range of 25-1000 MHz at an output impedance of 125 OHM.
MMZ1608Y601BTA00
TDK
TDK's MMZ1608Y601BTA00 is a 0603 chip bead data line filter with 2 terminals. Featuring ferrite chip construction, it has a max operating temp of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 mm, it offers an output impedance of 600 ohm and rated current of 0.5 A, ideal for surface mount applications in electronics.
FBMJ4516HS111-T
Taiyo Yuden
FBMJ4516HS111-T by Taiyo Yuden is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 85°C and a min frequency of 100 MHz. This filter is commonly used in applications requiring noise suppression in electronic circuits.
1206J0500104MXTE03
Knowles Precision Devices
1206J0500104MXTE03 by Knowles Precision Devices is a data line filter with 2 functions and a rated voltage of 50V. Featuring a min insulation resistance of 10000 Mohm, it is ideal for applications requiring feed through capacitor filters in temperatures ranging from -55 to 125 °C.
ACP3225-102-2P-TL000
TDK's ACP3225-102-2P-TL000 is a 2-function data line filter with 60V rated voltage and 1.2A current. With dimensions of L3.2xB2.5xH1.9 mm, it operates b/w -25 to 85 °C, ideal for surface mount applications in various electronic devices.
RB6122-50-0M3
Schaffner Holding Ag
RB6122-50-0M3 by Schaffner Holding Ag is a UL-approved data line filter with 600V rated voltage and 50A rated current. Featuring inductance of 250uH, it operates b/w -40°C to 125°C. Ideal for applications requiring noise suppression in data lines, it measures L61.0xB57.8xH38.0mm and has a max DC resistance of 0.0009 ohm.
MI0603J601R-10
Laird Technologies' MI0603J601R-10 is a chip bead data line filter with 2 terminals, operating from -40 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.2 ohm and an output impedance of 600 ohm for frequencies ranging from 25MHz to 1000MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 1A and is commonly used in electronic devices requiring noise suppression on data lines.
EMI103T-RC
Bourns EMI103T-RC is a 3-terminal data line filter with 10,000 Mohm insulation resistance and 50V rated voltage. It offers 25dB attenuation at max frequency of 15MHz, making it ideal for noise suppression in electronic circuits. With dimensions of L9.0xB3.2xH8.0 mm, this through-hole mount filter has a rated current of 5A and capacitance of 10,000uF.
742792631
Wuerth Elektronik & Kg
Wurth Elektronik 742792631 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.6xB0.8xH0.8 mm and output impedance of 240 ohm at frequencies ranging from 100 MHz to 400 MHz. Ideal for surface mounting, it has a DC resistance of 0.4 ohm and rated current of 0.2 A.
FBMH3216HM221NT8
Taiyo Yuden's FBMH3216HM221NT8 is a Ferrite Chip Data Line Filter with 2 terminals, rated for 4A current. It offers an output impedance of 220 ohms, operates b/w -40°C to 125°C, and has a max DC resistance of 0.02 ohm. Ideal for surface mount applications requiring noise suppression in data lines.
742792113
Wurth Elektronik 742792113 is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 3A current. It has dimensions of L3.2xB1.6xH1.1 mm and operates b/w -55 to 125 °C. Ideal for surface mount applications requiring output impedance of 120 ohm.
742792731
Wurth Elektronik 742792731 is a FERRITE CHIP Data Line Filter with 2 terminals. It has a max operating temp of 125°C and min of -55°C. With dimensions of L1.0xB0.5xH0.5 (mm), it's ideal for surface mount applications requiring a rated current of 1.2A and output impedance of 100Ω.
742792651
Wurth Elektronik 742792651 is a surface mount data line filter with AEC-Q200 screening. Featuring multi-layer construction, it has 2 terminals and FERRITE BEAD filter type. With dimensions of L1.6xB0.8xH0.8 mm, it operates b/w -55 to 125°C and offers an output impedance of 600 ohm for applications requiring noise suppression in automotive electronics.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved