Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Bourns MF-PSHT010X-2 is a PTC resettable fuse with 1 ohm resistance, 16V operating voltage, and dual-ended terminals. Ideal for overcurrent protection applications, it features a surface mount package style (SMT) with gold (Au) finish and nickel (Ni) barrier. Operating temperature ranges from -40°C to 125°C, meeting AEC-Q200, CUL, and TUV standards.
Median Price
$0.866
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Master Electronics
1+ parts
$1.051
100+ parts
-
1k+ parts
10k+ parts
$0.942
TTI Europe
$0.426
RS Americas
$1.090
PEI Genesis
Chip1Stop
$0.463
Verical
$1.049
Element14
$0.683
$0.542
$0.528
Farnell
Maritex
$0.399
Nova Conductors
$0.530
Vyrian
Component Sense
Rapid Electronics
$0.477
IBS Electronics
TME
$0.903
$0.646
$0.616
Netroflash
$0.503
$0.493
Authorized Procurement Solutions
Allen Electronics Distributors
$0.680
Continental Prestige Electronics
$0.462
This feature helps protect the circuit from excessive current flow, ensuring safety and preventing damage to the components.
The TR packing method in a 7-inch reel makes it convenient for automated assembly processes, saving time and effort in production.
The low resistance value of 1 ohm allows for precise current control, making it suitable for overcurrent protection applications.
With a high maximum operating temperature of 125°C, this thermistor can withstand elevated temperatures, providing reliability in various environments.
The gold terminal finish with a nickel barrier offers excellent conductivity and corrosion resistance, ensuring a reliable electrical connection.
The surface mounting type allows for easy and secure installation on PCBs, saving space and improving overall circuit efficiency.
Compliance with industry standards like AEC-Q200, CUL, and TUV ensures the quality and performance reliability of this thermistor for overcurrent protection applications.
Non-linear Resistors MF-PSHT010X-2 attributes and parameters. Explore more Non-linear Resistors devices from Bourns
Additional Features:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Operating Voltage:
MF-PSHT010X-2 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
PCN Obsolescence/ EOL - MF-PSHT010 06-Apr-2022
PCN Design/Specification - MF Cert Mark Aug/2015
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Comchip Technology
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
Toshiba
LD1117S33TR
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Tesla Elektronicke Soucastky
Changzhou Galaxy Century Microelectronics
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
RUEF110-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .17 ohm; Rated Power Dissipation (P): .7 W; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin/Copper (Sn/Cu);
ERZE14A391
Panasonic
The Panasonic ERZE14A391 is a VARISTOR with 275J energy capacity, 320V operating voltage, and 1W power dissipation. Ideal for surge protection in circuits with max 250V RMS or 320V DC voltages. RADIAL terminal placement and DISK PACKAGE shape make it suitable for THROUGH HOLE MOUNT applications.
MF-R135-2
Bourns
The Bourns MF-R135-2 is a PTC resettable fuse with resistance of 0.065 ohm, operating voltage of 30V, and temperature range from -40 to 85°C. It features radial terminal placement and wire shape, suitable for through-hole mounting applications in various electronic circuits.
NTCS0603E3103JMT
Vishay Intertechnology's NTCS0603E3103JMT is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 3610 K thermal sensitivity index. It is used for temperature sensing applications in a surface mount package, rated from -40 to 150 °C.
V250LA20AP
V250LA20AP by Littelfuse is a VARISTOR with 250V URac and 330V operating voltage. It has a max energy absorption of 72J, ideal for TEMPERATURE COMPENSATION applications. With radial terminal placement and metal oxide film technology, it operates b/w -55°C to 125°C effectively.
V10E25P
V10E25P by Littelfuse is a VARISTOR with METAL OXIDE FILM tech, 13J energy capacity, and 25V RMS voltage. Ideal for surge protection in electronics due to its radial package style, -40 to 85°C operating temp range, and UL/CUL/TUV certifications.
11026588-00
TE Connectivity
TE Connectivity's 11026588-00 is a non-linear resistor with 5000 ohm resistance, suitable for temperature sensing applications. Featuring radial terminal placement and flexible wire shape, it operates b/w -40 to 150 °C with high thermal sensitivity index of 3976 K. Ideal for chassis mounting, this component has two terminals and a lead length of 76 mm.
250R120U
250R120U by Littelfuse is a PTC resettable fuse with resistance of 4 ohm and rated AC voltage of 250 V. It is used for overcurrent protection in applications requiring radial terminal placement and rectangular package shape. Operating voltage is 60 V, with max temperature of 85 °C and min of -40 °C.
311P18-07S7R6
Quality Thermistor
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 90 Cel; Tolerance: .81 %; Thermistor Application: TEMPERATURE SENSING;
V18MLA0805LNHAUTO
V18MLA0805LNHAUTO by Littelfuse is a VARISTOR with 18V operating voltage, 0.1J energy capacity, and 14V RMS circuit voltage. It is used in automotive applications due to AEC-Q200 standard compliance and surface mounting type.
B72207S0300K101
TDK
The TDK B72207S0300K101 is a VARISTOR with 30V max circuit RMS voltage, 2J energy absorption, and -40 to 105°C operating temp. Ideal for surge protection in electronics due to its METAL OXIDE tech and RADIAL terminal placement.
TFPT1206L6800FV
Vishay Intertechnology's TFPT1206L6800FV is a PTC thermistor with 680 ohm resistance, 1% tolerance, and 0.125 W power dissipation. It is used for temperature sensing applications due to its dual-ended terminal placement and rectangular package shape. Operating b/w -55°C to 125°C, it features tin over nickel terminal finish for surface mounting method.
V275LA20APX1347
V275LA20APX1347 by Littelfuse is a VARISTOR with 275V URac, 75J energy capacity, and -55 to 125°C operating temp. Used for TEMPERATURE COMPENSATION in circuits requiring protection against voltage surges. RADIAL package style with THROUGH HOLE MOUNT for easy installation.
PS103J2
Us Sensor
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .03 W; Maximum Operating Temperature: 150 Cel; Tolerance: .1 %;
NANOSMDC020F-2
TE Connectivity's NANOSMDC020F-2 is a PTC resettable fuse with a rated power dissipation of 0.6W and max operating temperature of 85°C. It features dual-ended terminal placement in a rectangular package, suitable for temperature sensing applications at up to 24V AC voltage.
NCP21XV103J03RA
Murata Manufacturing
NCP21XV103J03RA by Murata is a Non-linear Resistor with 10000 ohm resistance, operating voltage of 5 V, and thermal sensitivity index of 3900 K. It is used for temperature sensing applications due to its NTC thermistor type, dual-ended terminal placement, and surface mounting type.
MF-LSMF330X-2
Bourns MF-LSMF330X-2 is a PTC resettable fuse with resistance of 0.01 ohm, operating voltage of 6V, and max temp of 85°C. Ideal for protection in electronic circuits, it features dual-ended terminals in a surface mount package style for compact applications.
B72500D0050A060
The TDK B72500D0050A060 is a VARISTOR with 5.6V operating voltage, suitable for SURFACE MOUNT applications. With DUAL ENDED terminal placement and RECTANGULAR PACKAGE shape, it offers protection against overvoltage in electronic circuits. Operating temperature range from -40°C to 85°C makes it versatile for various environments.
B72220P3461K101
The TDK B72220P3461K101 is a VARISTOR with 445J energy capacity, 615V operating voltage, and 460V max RMS voltage. Ideal for surge protection in circuits exposed to transient overvoltage events. Suitable for applications requiring high reliability in harsh environments due to its metal oxide film technology and radial terminal placement.
GA10K3MBD1
TE Connectivity's GA10K3MBD1 is a non-linear resistor with 2 terminals, operating b/w -40°C to 125°C. With a lead length of 56mm, it is ideal for temperature sensing applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MF-PSHT010KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1 ohm; Maximum Operating Temperature: 125 Cel; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; No. of Terminals: 2;
MF-PSMF035X-2
The Bourns MF-PSMF035X-2 is a PTC resettable fuse with resistance of 0.25 ohm, suitable for overcurrent protection. It features dual-ended terminals in a rectangular SMT package, with gold (Au) finish and nickel (Ni) barrier. Operating temperature ranges from -40 to 85 °C, making it ideal for various electronic applications.
MF-PSMF020X-2
The Bourns MF-PSMF020X-2 is a PTC resettable fuse with resistance of 0.65 ohm, suitable for overcurrent protection in circuits up to 9V DC. It features dual-ended terminals, SMT package style, and operates b/w -40°C to 85°C. Ideal for applications requiring compact surface-mount components with gold-nickel finish.
MF-PSMF110X-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .06 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 7 INCH; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
MF-PSMF010X-2
The Bourns MF-PSMF010X-2 is a PTC resettable fuse with a resistance of 1 ohm. It is used for overcurrent protection in various applications. With its dual-ended terminal placement and rectangular package shape, it offers easy surface mounting and operates within a temperature range of -40 to 85 °C.
MF-PSMF050X-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .15 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 7 INCH; Terminal Shape: WRAPAROUND;
MF-PSMF075X-2
The Bourns MF-PSMF075X-2 is a PTC resettable fuse with resistance of 0.09 ohm, dual-ended terminals, and SMT package style. Ideal for overcurrent protection applications, it has a max operating temperature of 85°C and min of -40°C. This rectangular package thermistor offers gold over nickel terminal finish and is UL, TUV, CUL certified.
MF-PSML075/12-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .04 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: WRAPAROUND; Minimum Operating Temperature: -40 Cel;
MF-PSHT035KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .25 ohm; Maximum Operating Temperature: 125 Cel; Length (Package): 2.3 mm; Additional Features: RMIN AT 23 DEG CEL;
MF-PSHT050KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .12 ohm; Maximum Operating Temperature: 125 Cel; Length (Package): 2.3 mm; Package Style (Meter): SMT;
MF-PSHT005KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.5 ohm; Maximum Operating Temperature: 125 Cel; Terminal Shape: WRAPAROUND; No. of Terminals: 2;
MF-PSML450/8-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .001 ohm; Maximum Operating Temperature: 85 Cel; Height (Package): .95 mm; Additional Features: RMIN AT 23 DEG CEL;
MF-PSML250/12-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .003 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 7 INCH; Width (Package): 1.5 mm;
MF-PSML075-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .02 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: WRAPAROUND; No. of Terminals: 2;
MF-PSML075/6-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .04 ohm; Maximum Operating Temperature: 85 Cel; Operating Voltage: 6 V; Width (Package): 1.5 mm;
MF-PSML150/12-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .015 ohm; Maximum Operating Temperature: 85 Cel; Operating Voltage: 12 V; Width (Package): 1.5 mm;
MF-PSML150/6-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .015 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): SMT; Terminal Shape: WRAPAROUND;
MF-PSML200/12-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .005 ohm; Maximum Operating Temperature: 85 Cel; Height (Package): 1.2 mm; Maximum Circuit DC Voltage: 12 V;
MF-PSHT016KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .7 ohm; Maximum Operating Temperature: 125 Cel; Reference Standard: AEC-Q200; CUL; TUV; Length (Package): 2.3 mm;
MF-PSHT020KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .5 ohm; Maximum Operating Temperature: 125 Cel; Length (Package): 2.3 mm; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved