Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns MF-PSML250/12-2 is a PTC resettable fuse with resistance of 0.003 ohm, operating voltage of 12V, and max circuit DC voltage of 12V. It is used in non-linear resistor applications, featuring dual-ended terminals for surface mounting method.
Median Price
$1.165
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.010
100+ parts
$0.629
1k+ parts
-
10k+ parts
$0.567
DigiKey
$1.570
$0.919
$0.702
Farnell
$0.816
$0.668
$0.554
Element14
$1.320
$1.080
$1.020
Nova Conductors
Continental Prestige Electronics
$1.050
$0.677
$0.637
$0.597
Argo Parts USA
Aranea Global
Dual ended terminal placement allows for easy installation and connectivity, making the product user-friendly.
TR, 7 inch packing method ensures convenient handling and storage of the product, making it suitable for various applications.
With a low resistance value of 0.003 ohm, this product offers efficient and effective performance in regulating current flow.
Surface mount technology (SMT) package style ensures a compact design and easy integration into electronic circuits.
With a maximum operating temperature of 85°C, this product can withstand high temperatures, enhancing its durability and reliability.
The ability to operate at a minimum temperature of -40°C makes this product suitable for use in extreme environments and conditions.
Featuring a PTC resettable fuse resistor type, this product offers overcurrent protection and automatic reset, ensuring the safety of the circuit.
With an operating voltage of 12 volts, this product is compatible with a wide range of electronic devices, making it versatile and practical.
Surface mounting type allows for easy installation on circuit boards, saving space and reducing assembly time.
Compliance with CUL, TUV, and UL reference standards ensures the product meets high-quality and safety requirements, providing peace of mind to users.
Non-linear Resistors MF-PSML250/12-2 attributes and parameters. Explore more Non-linear Resistors devices from Bourns
Additional Features:
Maximum Circuit DC Voltage:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Placement:
Terminal Shape:
Operating Voltage:
MF-PSML250/12-2 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Temic Semiconductors
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
B57164K0101J000
TDK
B57164K0101J000 by TDK is a NTC thermistor with 100 ohm resistance, 5% tolerance, and 3200 K thermal sensitivity index. It is used for temperature compensation applications with a rated temperature range of -55 to 125 °C. The thermistor has radial terminal placement and matte tin finish, suitable for through hole mounting in various electronic devices.
590-33BN01-103
Honeywell Sensing And Control
Honeywell Sensing And Control's 590-33BN01-103 is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and thermal sensitivity index of 3974 K. It is used for temperature sensing applications with a max operating temperature of 125°C and min of -60°C.
MICROSMD150F-2
TE Connectivity
TE Connectivity's MICROSMD150F-2 is a PTC resettable fuse with a rated AC voltage of 6V and max operating temp of 85°C. It features dual-ended terminals in a rectangular package, ideal for temperature sensing applications using surface mounting method.
B57235-S609-M
B57235-S609-M by TDK is a NTC thermistor with 6 ohm resistance, 20% tolerance, and 1.8 W power dissipation. It is used for temperature sensing applications with a rated AC voltage of 265 V and thermal sensitivity index of 2800 K. The thermistor has a radial terminal placement in disk package shape suitable for through hole mounting.
RF1256-000
VARISTOR; Manufacturer Series: PESD;
V5.5MLA0805LNHAUTO
Littelfuse
V5.5MLA0805LNHAUTO by Littelfuse is a VARISTOR with 5.5V operating voltage, 0.1J energy absorption, and 4V RMS circuit voltage. Ideal for automotive applications due to AEC-Q200 standard compliance and surface mounting type.
TFPT0603L1001FV
Vishay Intertechnology TFPT0603L1001FV is a PTC thermistor with 1000 ohm resistance, 1% tolerance, and 0.075 W power dissipation. It is used for temperature compensation in applications requiring dual-ended terminals and surface mounting type.
NTCG163JF103FT1S
NTCG163JF103FT1S by TDK is a Non-linear Resistor with 10000 ohm resistance, 1% tolerance, and -40 to 150 °C operating temperature range. It is a surface mount thermistor in a rectangular package suitable for automotive applications meeting AEC-Q200 standards.
NTCS0805E3103FLT
Vishay Intertechnology's NTCS0805E3103FLT is a 10000 ohm NTC thermistor with 1% tolerance. It has a thermal sensitivity index of 3430 K and operates b/w -40 to 150 °C. Ideal for temperature sensing applications, this SMT thermistor features dual-ended terminals in a rectangular package.
TRF250-145U
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 3.5 ohm; Maximum Operating Temperature: 85 Cel; Width (Package): 3.8 mm; Maximum Circuit RMS Voltage: 250 V;
ERTJ0ES104F
Panasonic ERTJ0ES104F is a NTC thermistor with 100000 ohm resistance, 1% tolerance, and 125°C max operating temp. Ideal for temperature compensation in various applications due to its SMT package style and thermal sensitivity index of 4390 K. Dual-ended terminals make it suitable for surface mounting methods.
103AT-4-70374
Semitec
Semitec's 103AT-4-70374 NTC Thermistor has a resistance of 10k ohm with ±1% tolerance. It is used for temperature compensation in various applications, featuring a thermal sensitivity index of 3435 K and operating temperature range from -30 to 90°C. The thermistor is chassis mountable with radial terminal placement and flexible wire shape.
60R185XF
60R185XF by Littelfuse is a PTC resettable fuse with resistance of 0.08 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications. Featuring radial terminal placement, disk package shape, and matte tin finish, it operates b/w -40 to 85°C.
111-202CAK-H01
111-202CAK-H01 by Honeywell is a NTC thermistor with 2000 ohm resistance, suitable for temperature sensing applications. It has a thermal sensitivity index of 3000 K and can operate b/w -60 to 300°C. This disk package component features wire terminals for through hole mounting.
ERTJ1VV104J
Panasonic ERTJ1VV104J is a NTC thermistor with 100000 ohm resistance, 5% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in applications requiring dual-ended terminals and surface mounting type.
V33MLA1206H
V33MLA1206H by Littelfuse is a VARISTOR with 33 V operating voltage and 0.8 J energy capacity. It has a max circuit RMS voltage of 26 V, suitable for surge protection in electronic circuits. With surface mounting type and dual-ended terminals, it offers reliable overvoltage protection in compact designs.
B72580V0600K062
The TDK B72580V0600K062 is a VARISTOR with 5.8J energy capacity, 60V max RMS voltage, and -55 to 125°C operating range. Ideal for surge protection in electronics due to its dual terminal placement and surface mounting type.
RXEF030
TE Connectivity's RXEF030 is a PTC resettable fuse with 2.1 ohm resistance and rated AC voltage of 72V. Ideal for temperature sensing applications, it has a max operating temp of 85°C and min of -40°C. With radial terminal placement and disk package shape, it offers 0.49W power dissipation in through-hole mounting method.
NTHS1206N02N1002KE
Vishay Intertechnology's NTHS1206N02N1002KE is a Non-linear Resistor with 10,000 ohm resistance and 10% tolerance. It is used for TEMPERATURE COMPENSATION applications, featuring a Thermal Sensitivity Index of 3486 K and operating temperature range from -40 to 125 °C. Ideal for surface mounting with dual-ended terminals in a rectangular package.
NTCS0603E3103GMT
Vishay Intertechnology's NTCS0603E3103GMT is a NTC thermistor with 10000 ohm resistance, 2% tolerance, and 150°C max operating temp. Ideal for temperature sensing applications due to its thermal sensitivity index of 3610 K and surface mount package style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MF-PSMF035X-2
Bourns
The Bourns MF-PSMF035X-2 is a PTC resettable fuse with resistance of 0.25 ohm, suitable for overcurrent protection. It features dual-ended terminals in a rectangular SMT package, with gold (Au) finish and nickel (Ni) barrier. Operating temperature ranges from -40 to 85 °C, making it ideal for various electronic applications.
MF-PSMF010X-2
The Bourns MF-PSMF010X-2 is a PTC resettable fuse with a resistance of 1 ohm. It is used for overcurrent protection in various applications. With its dual-ended terminal placement and rectangular package shape, it offers easy surface mounting and operates within a temperature range of -40 to 85 °C.
MF-PSMF020X-2
The Bourns MF-PSMF020X-2 is a PTC resettable fuse with resistance of 0.65 ohm, suitable for overcurrent protection in circuits up to 9V DC. It features dual-ended terminals, SMT package style, and operates b/w -40°C to 85°C. Ideal for applications requiring compact surface-mount components with gold-nickel finish.
MF-PSMF110X-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .06 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 7 INCH; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
MF-PSMF050X-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .15 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, 7 INCH; Terminal Shape: WRAPAROUND;
MF-PSML075/12-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .04 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: WRAPAROUND; Minimum Operating Temperature: -40 Cel;
MF-PSHT035KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .25 ohm; Maximum Operating Temperature: 125 Cel; Length (Package): 2.3 mm; Additional Features: RMIN AT 23 DEG CEL;
MF-PSHT005KX-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.5 ohm; Maximum Operating Temperature: 125 Cel; Terminal Shape: WRAPAROUND; No. of Terminals: 2;
MF-PSMF075X-2
The Bourns MF-PSMF075X-2 is a PTC resettable fuse with resistance of 0.09 ohm, dual-ended terminals, and SMT package style. Ideal for overcurrent protection applications, it has a max operating temperature of 85°C and min of -40°C. This rectangular package thermistor offers gold over nickel terminal finish and is UL, TUV, CUL certified.
MF-PSML110-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .0175 ohm; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Terminal Shape: WRAPAROUND;
MF-PSML200-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .005 ohm; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Additional Features: RMIN AT 23 DEG CEL;
MF-PSML260-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .003 ohm; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Operating Voltage: 6 V;
MF-PSML200/12-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .005 ohm; Maximum Operating Temperature: 85 Cel; Height (Package): 1.2 mm; Maximum Circuit DC Voltage: 12 V;
MF-PSML260/12-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .003 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: WRAPAROUND; Length (Package): 2.3 mm;
MF-PSML350/8-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .002 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Height (Package): .95 mm;
MF-PSML450/8-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .001 ohm; Maximum Operating Temperature: 85 Cel; Height (Package): .95 mm; Additional Features: RMIN AT 23 DEG CEL;
MF-PSML200/6-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .005 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: WRAPAROUND; Maximum Circuit DC Voltage: 6 V;
MF-PSML250/6-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .003 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; No. of Terminals: 2;
MF-PSML075-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .02 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: WRAPAROUND; No. of Terminals: 2;
MF-PSML260/6-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .003 ohm; Maximum Operating Temperature: 85 Cel; Reference Standard: CUL; TUV; UL; Maximum Circuit DC Voltage: 6 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved