Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns 3386P-1-503LF is a CERMET trimmer resistor with 50000 ohm resistance, linear law, and 10% tolerance. Ideal for PCB mounting applications, it has a max operating temperature of 125°C and min of -55°C. Its screw actuator allows for precise adjustments in various electronic circuits.
Median Price
$1.247
Lifecycle Status
Suppliers In-Stock
36
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$1.140
100+ parts
-
1k+ parts
10k+ parts
Newark
$1.470
$1.020
$0.891
$0.887
RS Americas
$1.610
$1.370
DigiKey
$1.690
$1.174
$0.973
$0.852
Element14
$1.732
$1.121
$0.936
Farnell
$1.897
$1.074
$0.894
Bürklin Elektronik
$2.590
$1.420
$1.070
TTI
$0.990
$0.810
$0.760
Chip1Stop
$1.184
$0.876
TTI Europe
$0.911
$0.675
$0.622
Master Electronics
$1.055
$0.950
$0.828
Verical
$1.118
Arrow
$0.661
$0.646
$0.638
Ozdisan Elektronik
$0.827
Nova Conductors
$0.860
TME
$1.300
Maritex
$1.398
$0.938
$0.753
$0.745
Rapid Electronics
$1.505
$1.059
Chip Stock
Amar Radio Corporation
ComSIT Distribution GmbH
ComSIT USA
VNN
Vyrian
Electro Sonic
$0.953
$0.693
$0.626
R&J Components
LWI Electronics Inc
NAC Semi
$1.290
IBS Electronics
$1.111
$0.982
$0.962
Classic Components Corporation
Corel Iberica Componentes, S.L.
Bas Electronics GmbH & Co. KG
Holdelec - ElecDif-Pro
Avant Electronics Limited
Bristol Electronics
Pegasus Components GmbH
Corohmni
$0.149
Aztec Data Supply Inc.
$0.336
Aranea Global
$0.843
$0.809
Continental Prestige Electronics
Argo Parts USA
Advanced Electronics
$0.877
Benley Electronics
$1.500
Kepictronics
Perfect Parts
Infinite Electronics LLP (Excess)
GreenTree Electronics
Authorized Procurement Solutions
Futuretech Components
Abacus Technologies
Cyclops Electronics Ltd (Excess)
Eastek
Computer Components Inc. - USA
The small diameter of the leads makes it easy to connect this variable resistor to a circuit board or other components without taking up too much space.
With a rated temperature of 85°C, this variable resistor can operate effectively in a wide range of environments, making it versatile and reliable.
The high resistance value of 50000 ohms allows for precise control and adjustment in various applications, making this variable resistor suitable for a range of voltage dividing and biasing purposes.
The matte tin finish on the terminals provides a stable and reliable connection, ensuring consistent performance and durability over time.
With a rated power dissipation of 0.5 watts, this variable resistor can handle higher power levels without overheating, ensuring long-term functionality and stability in demanding applications.
Variable Resistors 3386P-1-503LF attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
3386P-1-503LF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
1N4148
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
Good-ark Electronics
Leshan Radio
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
Rochester Electronics
CRCW080510R0FKEA
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
Changzhou Galaxy Century Microelectronics
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Digitron Semiconductors
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RT24C2X103
Defense Logistics Agency
RT24C2X103 by Defense Logistics Agency is a 10000 ohm linear trimmer resistor with 25 turns, rated for temperatures b/w -65 to 150 °C. It features wire wound technology, screw actuator type, and has a power dissipation of 0.75 W. Ideal for precise resistance adjustments in military-grade applications per MIL-PRF-27208 standards.
3306P-1-502
Bourns
Bourns 3306P-1-502 is a CERMET trimmer resistor with 5000 ohm resistance, 25% tolerance, and 215° rotation angle. It is used in PCB mount applications for voltage up to 100V, offering linear resistance law and operating temperature range of -25 to 100 °C.
3223W-1-102E
Bourns 3223W-1-102E is a CERMET trimmer resistor with 1000 ohm resistance, 11 turns, and linear resistance law. It operates b/w -65 to 150 °C and has a power dissipation of 0.125 W. Ideal for applications requiring precise voltage adjustments in compact SMT packages.
6574S-1-502
Bourns 6574S-1-502 is a linear potentiometer with 5000 ohm resistance, 10% tolerance, and 2W power dissipation. It has a circular package, shaft actuator type, and operates b/w -40 to 125 °C. Ideal for servo mount applications requiring precise resistance adjustments in a panel-mount setup.
3386R-1-502LF
Bourns 3386R-1-502LF is a linear trimmer resistor with 5000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has a temperature coefficient of 100 ppm/°C and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
67WR200KLF
Tt Electronics Plc
67WR200KLF by Tt Electronics Plc is a CERMET variable resistor with 20 turns, linear resistance law, and 85°C rated temperature. It is used in applications requiring precise resistance adjustments such as PCB mounting for through-hole assembly. With a max operating temperature of 125°C and an operating voltage of 200V, it offers reliable performance in various electronic circuits.
3296W-1-104RLF
Bourns 3296W-1-104RLF is a CERMET multi-turn trimmer resistor with 100k ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in circuits with up to 300 V operating voltage.
RT100AS4R70KB
Vishay Intertechnology's RT100AS4R70KB is a 4.7 ohm wire wound POTENTIOMETER with 10% tolerance, 100 W power dissipation, and 320°C max operating temp. Ideal for panel mount applications, it offers a wide resistance range and high voltage capability for precise control in various electronic circuits.
89PHR5K
89PHR5K by Tt Electronics Plc is a CERMET trimmer pot with 5000 ohm resistance, suitable for PCB mount applications. It features 20 turns, linear resistance law, and operates b/w -55 to 125 °C. Ideal for adjusting voltage in electronic circuits with a rated power dissipation of 0.75 W.
3306W-1-502
Bourns 3306W-1-502 is a CERMET trimmer resistor with 5000 ohm resistance, 25% tolerance, and 0.2 W power dissipation. It is used in PCB mount applications for adjusting voltage levels with an operating range of -25 to 100 °C.
3386P-1-105LF
Bourns 3386P-1-105LF is a CERMET trimmer resistor with 1000000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its linear resistance law and wide operating temperature range (-55 to 125 °C).
14821F0GJSX13103KA
Vishay Intertechnology's 14821F0GJSX13103KA is a linear conductive plastic trimmer pot with 10000 ohm resistance, 3 terminals, and 10% tolerance. It operates b/w -40 to 125 °C and has a power dissipation of 0.5 W. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
73JB20K
Honeywell Sensing And Control
73JB20K by Honeywell is a linear wire wound potentiometer with 20000 ohm resistance, 5% tolerance, and 2W power dissipation. It has a vertical actuator orientation, circular package shape, and shaft actuator type. Ideal for chassis mount applications with operating temperatures from -40°C to 120°C.
3362U-1-105LF
Bourns 3362U-1-105LF is a CERMET trimmer resistor with 1000000 ohm resistance, linear law, and 10% tolerance. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
3266X-1-203LF
Bourns 3266X-1-203LF is a CERMET trimmer resistor with 12 turns, 20000 ohm resistance, and linear law. Ideal for applications requiring precise resistance adjustments in circuits with operating voltage up to 300V. Features multi-turn construction, -55 to 150 °C temperature range, and matte tin terminal finish.
67WR1KLF
67WR1KLF by Tt Electronics Plc is a CERMET variable resistor with 20 turns and linear resistance law. It has a rated power dissipation of 0.5W, operating voltage of 200V, and temperature coefficient of 100 ppm/°C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
P160KNP-0EC15B100K
P160KNP-0EC15B100K by Tt Electronics Plc is a 100k ohm linear conductive plastic rotary potentiometer with 3 terminals. It has a 260° angle of rotation, suitable for PCB mount applications. With a rated power dissipation of 0.2W and operating temperature range from -20 to 70 °C, it's ideal for precise control in various electronic devices.
3296P-1-500LF
Bourns 3296P-1-500LF is a 50 ohm, 25-turn linear cermet trimmer resistor with a tolerance of 10%. Operating voltage of 300V and rated power dissipation of 0.5W. Ideal for applications requiring precise resistance adjustments in electronic circuits.
3352T-1-103LF
The Bourns 3352T-1-103LF is a linear variable resistor with a resistance of 10k ohm, rated for temperatures b/w -55°C and 125°C. It is commonly used in PCB mount applications where precise resistance adjustment is required.
53C135K
53C135K by Honeywell Sensing And Control is a linear potentiometer with resistance of 35k ohm, 10% tolerance, and 2W power dissipation. It has a circular package, horizontal actuator orientation, and conductive plastic technology. Ideal for panel mount applications in temperature range -55 to 120°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3386P-1-103LF
Bourns 3386P-1-103LF is a CERMET trimmer resistor with 10000 ohm resistance, linear law, and 10% tolerance. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
3386P-1-104LF
Bourns 3386P-1-104LF is a CERMET trimmer resistor with 100k ohm resistance, linear law, and 10% tolerance. Ideal for PCB mounting applications, it has a rated power dissipation of 0.5W and operates b/w -55°C to 125°C temperatures.
3386P-1-201LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-103LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386P-1-203LF
Bourns 3386P-1-203LF is a linear trimmer resistor with 20000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its wide operating range from -55 to 125 °C. The screw actuator allows precise adjustments with a rotation angle of 280°.
3386P-1-502LF
Bourns 3386P-1-502LF is a CERMET trimmer resistor with 5000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has a linear law of resistance and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
3386P-1-504LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-103TLF
3386P-1-103TLF
3386F-1-102TLF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386W-1-102LF
3386F-1-104TLF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-503TLF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386P-1-101LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386V-1-201
3386W-1-104LF
3386W-1-501LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-203LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386H-1-203LF
The Bourns 3386H-1-203LF is a linear variable resistor with a resistance of 20000 ohm and a tolerance of 10%. It is commonly used in PCB mount applications for adjusting or trimming circuit parameters.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved