Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns 3386P-1-200LF is a CERMET trimmer resistor with 20 ohm resistance, linear law, and 10% tolerance. It has a max operating temperature of 125°C and is PCB mountable. Ideal for applications requiring precise resistance adjustments in electronic circuits.
Median Price
$1.438
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Newark
1+ parts
$1.220
100+ parts
$0.864
1k+ parts
$0.727
10k+ parts
$0.686
Mouser Electronics
$1.360
$0.945
$0.783
DigiKey
$0.946
$0.784
$0.687
Element14
$1.517
$0.851
$0.688
-
Farnell
$1.854
$0.922
$0.690
Verical
$2.054
$1.214
$0.896
Vyrian
VNN
Electro Sonic
$1.629
$0.962
$0.702
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
LIBRA Elektronik GmbH
Nova Conductors
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Advanced Electronics
$0.037
$0.034
$0.030
Corohmni
$0.261
Continental Prestige Electronics
$1.020
AZTECH Wire
$1.560
$1.500
$1.470
$1.440
Authorized Procurement Solutions
Glotronic Ltd.
Kepictronics
Allen Electronics Distributors
$0.929
$0.747
Netroflash
The small diameter of the leads makes it easy to solder onto a circuit board without taking up too much space.
The resistor can operate reliably at temperatures up to 85°C, making it suitable for a wide range of applications.
The vertical orientation of the actuator allows for easy adjustment and precise control over the resistance value.
Cermet technology offers higher stability and reliability compared to other types of resistors, making this product ideal for critical applications.
The rectangular package design allows for easy mounting and efficient use of space on a circuit board.
The linear law of resistance ensures a consistent and predictable change in resistance with respect to the actuator position, making it easier to dial in the desired resistance value.
The 20 ohm resistance value provides a wide range of possible resistance settings for various applications.
Having 3 terminals allows for more precise control and measurement of the resistance value within the circuit.
Wire terminals are easy to connect and provide a secure connection to the circuit, ensuring reliable performance.
The high maximum operating temperature of 125°C ensures that the resistor can withstand elevated temperatures without degradation.
The low minimum operating temperature of -55°C makes this resistor suitable for use in both hot and cold environments.
With a temperature coefficient of 100 ppm/°C, this resistor offers stable performance over a wide temperature range.
Matte tin terminal finish provides corrosion resistance and ensures good solderability for long-lasting performance.
The through-hole mounting type allows for easy installation onto a circuit board with secure mechanical support.
The screw-type actuator provides precise and repeatable adjustments to the resistance value, allowing for fine-tuning of the circuit.
With a tolerance of 10%, this resistor provides consistent and reliable performance within a specified range of resistance values.
The rated power dissipation of 0.5 W indicates the maximum power that can be safely dissipated by the resistor without overheating or damage.
The 280° angle of rotation allows for a wide range of adjustment for fine-tuning the resistance value within the circuit.
Variable Resistors 3386P-1-200LF attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
3386P-1-200LF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
Continental Device India
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Kec
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
3296Y-1-102LF
Bourns
Bourns 3296Y-1-102LF is a 1000 ohm linear trimmer resistor with 25 turns, CERMET technology, and 10% tolerance. Ideal for applications requiring precise resistance adjustments in circuits with operating voltage up to 300V. Features multi-turn construction, through-hole mounting, and temperature coefficient of 100 ppm/°C.
PT10LV10-105A2020-S
Amphenol
Amphenol's PT10LV10-105A2020-S is a linear carbon potentiometer with 1000000 ohm resistance, 20% tolerance, and 220° rotation angle. Ideal for PCB mounting applications, it operates b/w -25 to 70 °C with a max voltage of 200 V.
RJS8R0E
Ohmite Manufacturing
Ohmite Manufacturing's RJS8R0E is a 8 ohm linear wire wound potentiometer with 10% tolerance. Featuring a 50W power dissipation, it has a circular package with 58.67mm diameter and 34.93mm length for panel mount applications requiring precise resistance adjustments up to 300° rotation angle.
416MA204P
TE Connectivity
TE Connectivity's 416MA204P is a CERMET variable resistor with 200k ohm resistance, 0.2% tolerance, and 0.2W power dissipation. Ideal for applications requiring precise linear resistance adjustments in through-hole mounting setups.
252A103A60NB
Cts
The Cts 252A103A60NB is a linear potentiometer with 10000 ohm resistance, suitable for applications requiring precise voltage control. Featuring a vertical actuator and rectangular package, it has 6 wire terminals and operates b/w -10°C to 85°C. With a tolerance of 10%, this through-hole mount device has a rated power dissipation of 0.0125 W, making it ideal for joystick-type controls.
PVZ3K104E01R00
Murata Manufacturing
Murata Manufacturing's PVZ3K104E01R00 is a 100k ohm linear trimmer resistor with 30% tolerance. It operates at temperatures ranging from -25°C to 85°C, with a temperature coefficient of 500 ppm/°C. This surface mount variable resistor is ideal for applications requiring precise resistance adjustments in compact electronic devices.
89PHR100KLF
Tt Electronics Plc
89PHR100KLF by Tt Electronics Plc is a CERMET variable resistor with 100000 ohm resistance, rated for 0.75 W power dissipation. It features a linear law of resistance and operates b/w -55 to 125 °C temperatures. Ideal for PCB mounting applications requiring precise voltage adjustments in electronic circuits.
T7YB472MB40
Vishay Intertechnology
Vishay Intertechnology T7YB472MB40 is a CERMET trimmer resistor with 4700 ohm resistance, 20% tolerance, and 0.5 W power dissipation. It is used in PCB mounting applications for temperature-sensitive circuits requiring precise resistance adjustments. Operating voltage of 48.5 V and linear law of resistance make it suitable for various electronic devices.
PA16NP473MAB15
Vishay Intertechnology's PA16NP473MAB15 is a 47000 ohm linear potentiometer with 3 terminals. It operates b/w -40 to 85 °C and has a tolerance of 20%. Ideal for panel mount applications, it features a circular package with a diameter of 16 mm and an operating voltage of 153 V.
RRS500E
Ohmite Manufacturing's RRS500E is a 500 ohm linear wire wound potentiometer with 3 lug terminals. It has a rated power dissipation of 500W, diameter of 203.2mm, and length of 53.98mm. Ideal for panel mount applications requiring precise resistance adjustments in electrical circuits.
PV32P502A01B00
Murata Manufacturing's PV32P502A01B00 is a 5000 ohm linear trimmer pot with 3 terminals. It has a rated power dissipation of 0.5W and operates at temperatures from -55 to 125 °C. Ideal for PCB mounting, this variable resistor is commonly used in applications requiring precise resistance adjustments.
M63M201KB30T607
Vishay Intertechnology's M63M201KB30T607 is a CERMET TRIMMER resistor with linear resistance law, 10% tolerance, and 270° rotation angle. Ideal for PCB mounting applications in temperature-sensitive environments with operating range from -55 to 125 °C.
D50K250E
The Ohmite D50K250E is a 250 ohm wire wound potentiometer with linear resistance law. It has a rated power of 50W, operating voltage of 1625V, and temperature coefficient of 260 ppm/°C. Ideal for chassis mount applications requiring precise resistance control in high-temperature environments up to 350 °C.
3299Y-1-504
The Bourns 3299Y-1-504 is a CERMET trimmer pot with 25 turns and linear resistance law. It has a resistance of 500k ohm, rated power of 0.5W, and operates at temperatures from -55 to 125 °C. Ideal for PCB mounting applications requiring precise voltage adjustments.
PTC10LV10502A2020
Piher Sensors And Controls Sa
PTC10LV10502A2020 by Piher Sensors: 5000 ohm linear trimmer resistor with 20% tolerance. Rated for -40 to 90 °C, ideal for through-hole mounting in various electronic applications.
225WA050
Nte Electronics
The Nte Electronics 225WA050 is a 50 ohm wire wound potentiometer with linear resistance law. It has a rated power dissipation of 225W and operates at a max temperature of 375°C. Ideal for chassis mount applications requiring precise resistance adjustments.
TC33X-2-104E
Bourns TC33X-2-104E is a linear trimmer resistor with 100k ohm resistance, 25% tolerance, and 0.15W power dissipation. It operates b/w -40 to 100°C, suitable for applications requiring precise resistance adjustments in compact SMT designs at up to 50V voltage.
91ER500KLF
91ER500KLF by Tt Electronics Plc is a CERMET variable resistor with 500000 ohm resistance, suitable for PCB mounting. It has a linear law of resistance, operates b/w -55 to 125 °C, and can handle up to 250V. Ideal for applications requiring precise resistance adjustments in electronic circuits.
PT6KV-502A2020
Amphenol's PT6KV-502A2020 is a 5000 ohm linear trimmer resistor with 20% tolerance, suitable for PCB mounting. It operates at temperatures ranging from -25 to 70 °C and has a power dissipation of 0.1 W. Ideal for applications requiring precise resistance adjustments in electronic circuits.
RK27112A00B9
Alps Electric
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3386P-1-103LF
Bourns 3386P-1-103LF is a CERMET trimmer resistor with 10000 ohm resistance, linear law, and 10% tolerance. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
3386P-1-104LF
Bourns 3386P-1-104LF is a CERMET trimmer resistor with 100k ohm resistance, linear law, and 10% tolerance. Ideal for PCB mounting applications, it has a rated power dissipation of 0.5W and operates b/w -55°C to 125°C temperatures.
3386P-1-201LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-103LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386P-1-502LF
Bourns 3386P-1-502LF is a CERMET trimmer resistor with 5000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has a linear law of resistance and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
3386P-1-203LF
Bourns 3386P-1-203LF is a linear trimmer resistor with 20000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its wide operating range from -55 to 125 °C. The screw actuator allows precise adjustments with a rotation angle of 280°.
3386F-1-103TLF
3386P-1-103TLF
3386P-1-504LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-501LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-102TLF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-203LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386G-1-204LF
Bourns 3386G-1-204LF is a CERMET trimmer resistor with 200k ohm resistance, 10% tolerance, and 0.5W power dissipation. Ideal for PCB mounting applications in temperature-sensitive environments with operating range from -55 to 125°C. Its linear law of resistance and screw actuator make it suitable for precise adjustments in various electronic circuits.
3386R-1-502LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-503TLF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386W-1-501LF
3386F-1-502LF
3386W-1-102LF
3386P-1-105LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386P-1-205LF
Bourns 3386P-1-205LF is a CERMET trimmer resistor with 2000000 ohm resistance, linear law, and 10% tolerance. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved