Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 100 Cel; Tolerance: 25 %;
Median Price
$0.380
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Component Electronics Inc.
1+ parts
100+ parts
$0.290
1k+ parts
$0.250
10k+ parts
-
Perfect Parts
Glotronic Ltd.
Variable Resistors 3319P-1-102 attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
3319P-1-102 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
TCA6424ARGJR
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
1N4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Synsemi
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
SS14
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
STM8S003F3P6TR
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
SPC TECHNOLOGY/ MULTICOMP
Microsemi
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
PDB183-GTR22-504A2
Bourns
Bourns PDB183-GTR22-504A2 is a 500k ohm potentiometer with 20% tolerance, suitable for audio applications. It has a rated power dissipation of 0.1W and operates at temperatures from -10 to 50°C. The cylindrical package with vertical orientation and lug terminals make it ideal for panel mount in chassis setups.
M43P104KB40
Vishay Intertechnology
Vishay Intertechnology's M43P104KB40 is a linear trimmer resistor with 15 turns and 100k ohm resistance. Operating voltage of 274V, rated power dissipation of 0.75W, and temperature coefficient of 100 ppm/°C make it ideal for PCB mount applications requiring precise resistance adjustments in a compact package.
3006P-1-503LF
The Bourns 3006P-1-503LF is a CERMET trimmer pot with 15 turns and linear resistance law. It has a resistance of 50k ohm, rated power of 0.75W, and operates at temperatures from -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
67WR500LFTB
Tt Electronics Plc
67WR500LFTB by Tt Electronics Plc is a CERMET variable resistor with 20 turns, linear resistance law, and 85°C rated temperature. It is used in PCB mount applications for adjusting voltage with a tolerance of 10% and max operating temperature of 125°C.
3400S-1-502L
Bourns 3400S-1-502L is a linear potentiometer with 5000 ohm resistance, 3% tolerance, and 5W power dissipation. It has a circular package, gold over nickel terminals, and operates b/w 1°C to 125°C. Ideal for chassis mount applications requiring precise resistance adjustments in horizontal orientation.
CCU1031-E
Ohmite Manufacturing
The Ohmite Manufacturing CCU1031-E is a 10000 ohm linear potentiometer with 6 lug terminals. It has a rated power dissipation of 2W and operates b/w -55°C to 120°C. Ideal for panel mounting applications, this circular package resistor features a horizontal actuator shaft and is commonly used in electronic circuits requiring precise resistance adjustments.
PV37W103C01B00
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
RK27112A00AK
Alps Alpine
Alps Alpine RK27112A00AK is a linear potentiometer with 100k ohm resistance, 20% tolerance, and 0.05W power dissipation. It has a shaft actuator, through-hole mounting, and PCB package style. Ideal for applications requiring precise voltage or current control in electronic circuits.
72PMR50LFTB
72PMR50LFTB by Tt Electronics Plc is a CERMET variable resistor with linear resistance law, suitable for PCB mounting. With a max operating temperature of 125°C and voltage rating of 200V, it offers precise adjustment in applications requiring a resistance range from -55°C to 125°C. Its compact design with through-hole mounting makes it ideal for electronic circuits where accurate resistance control is essential.
TC73W-1-104E
Bourns TC73W-1-104E is a 100k ohm linear trimmer resistor with 20 turns, rated for temperatures b/w -25 to 85°C. Ideal for applications requiring precise resistance adjustments in compact SMT designs.
73JA2K
Honeywell Sensing And Control
73JA2K by Honeywell Sensing And Control is a 2000 ohm linear wire wound potentiometer with 3 lug terminals. It has a tolerance of 5% and rated power dissipation of 2W, suitable for chassis mount applications. Operating temperature ranges from -40 to 120 °C, making it ideal for various industrial control systems.
TS63Y502KT20
Vishay Intertechnology's TS63Y502KT20 is a 5000 ohm TRIMMER resistor with 14 turns, linear resistance law, and 10% tolerance. It operates b/w -55 to 155 °C and has a rated power dissipation of 0.25 W. Ideal for applications requiring precise resistance adjustments in compact SMT packages.
27ESA103MMF50N
TE Connectivity
TE Connectivity's 27ESA103MMF50N is a linear carbon film potentiometer with 10000 ohm resistance, 20% tolerance, and 0.4 W power dissipation. It features a circular package, horizontal actuator orientation, and shaft actuator type. Ideal for applications requiring precise resistance adjustments in electronic circuits.
3296Z-1-501LF
Bourns 3296Z-1-501LF is a CERMET multi-turn trimmer resistor with 500 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in electronic circuits.
17PCSA103MC19P
TE Connectivity's 17PCSA103MC19P is a 10000 ohm linear potentiometer with 3 terminals and a rectangular package. It features a thick film technology, shaft actuator type, and 20% tolerance. Ideal for applications requiring precise resistance adjustments in through-hole mounting setups.
3214W-1-103E
Bourns 3214W-1-103E is a linear trimmer pot with 10000 ohm resistance, rated for 0.25 W power dissipation. It has a max operating temperature of 150°C and is ideal for surface mount applications requiring precise resistance adjustments in electronic circuits.
3386F-1-203LF
Bourns 3386F-1-203LF is a CERMET trimmer resistor with 20000 ohm resistance, linear law, and 10% tolerance. Ideal for PCB mounting applications in temperature-sensitive environments with an operating range from -55 to 125 °C. Features vertical actuator orientation and screw-type actuator for precise adjustments.
23ESA474MMF50AF
TE Connectivity's 23ESA474MMF50AF is a linear carbon film potentiometer with 470k ohm resistance, 20% tolerance, and 0.4W power dissipation. It features a circular package, horizontal actuator orientation, and through-hole mounting. Ideal for precise control applications in various electronic devices.
3314G-1-203E
Bourns 3314G-1-203E is a CERMET variable resistor with 20000 ohm resistance, 20% tolerance, and 210° rotation angle. It is used in applications requiring precise voltage control in automotive electronics due to its AEC-Q200 reference standard compliance.
14910F0GJSX10502KA
Vishay Intertechnology's 14910F0GJSX10502KA is a CERMET trimmer pot with 5000 ohm resistance, 10% tolerance, and 1W power dissipation. Ideal for PCB mount applications, it operates b/w -40 to 125 °C with a temperature coefficient of 150 ppm/°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved