Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns 3224X-1-504E is a linear trimmer pot with 12 turns, 500000 ohm resistance, and 10% tolerance. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range from -65°C to 150°C. The cermet technology and screw actuator make it suitable for precise adjustments in various circuits.
Median Price
$2.421
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Master Electronics
1+ parts
-
100+ parts
1k+ parts
$2.090
10k+ parts
$1.990
Verical
$2.752
Nova Conductors
$2.246
VNN
Vyrian
Electro Sonic
$2.190
$2.150
IBS Electronics
$2.931
$2.791
Connector Distribution Corp
Right Parts Inc.
Inventory MP
Bristol Electronics
Corohmni
$0.072
Aztec Data Supply Inc.
$0.140
Aranea Global
$2.201
$2.113
Argo Parts USA
Continental Prestige Electronics
$2.040
$1.750
Having 12 turns allows for precise adjustment of resistance, making this product suitable for applications requiring fine tuning.
With a rated temperature of 85°C, this product can handle moderate temperature environments effectively.
Vertical orientation of the actuator makes it easy to adjust the resistance with precision and accuracy.
Cermet technology ensures stable and reliable performance over time, making this product a durable choice.
The rectangular package design allows for easy integration and space-saving on the circuit board.
The linear law of resistance ensures a proportional change in resistance with the rotation of the actuator, providing predictable results.
The trimmer pot construction allows for easy adjustment of resistance, making it ideal for calibration and tuning applications.
The embossed packing method ensures secure packaging and handling during transportation and storage.
With a high resistance value of 500000 ohms, this product is suitable for applications requiring high resistance levels.
Having 3 terminals allows for easy connections and flexibility in circuit design.
The SMT package style enables easy surface mounting on the circuit board, saving space and simplifying the assembly process.
The gull wing terminal shape provides stability and secure connections, ensuring reliable performance.
With a maximum operating temperature of 150°C, this product can withstand high temperature environments without compromising performance.
The wide range of minimum operating temperature (-65°C) ensures the product can function effectively in cold temperature conditions as well.
A temperature coefficient of 100 ppm/°C ensures minimal change in resistance over a wide temperature range, maintaining accuracy in various operating conditions.
Matte tin terminal finish provides good solderability and conductivity, ensuring stable electrical connections.
The compact height of 5.1 mm allows for easy integration into space-constrained applications.
Being a trimmer resistor, this product offers adjustable resistance for fine-tuning circuits and calibrations.
The screw-type actuator enables precise and efficient adjustment of resistance, making it a user-friendly choice.
With a tolerance of 10%, this product provides a reliable and consistent level of resistance within a specified range.
The length of 4.8 mm allows for compact placement on the circuit board, optimizing space utilization.
The surface mounting type simplifies the assembly process and facilitates automated placement during production.
With a rated power dissipation of 0.25 W, this product can handle moderate power levels effectively.
The width of 3.5 mm ensures compatibility with standard circuit board designs and allows for efficient use of space.
The wide angle of rotation of 4320° allows for precise adjustment and fine-tuning of resistance levels.
Variable Resistors 3224X-1-504E attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
JESD-609 Code:
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
3224X-1-504E Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
PCN Design/Specification - 3214, 3224 Series Plastic March/2011 3224 Model Epoxy Color June/2007
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
General Semiconductor
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
EU2B-YS3203F
Idec
ROTARY SWITCH;
USB3320C-EZK-TR
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
D12K2K0E
Ohmite Manufacturing
D12K2K0E by Ohmite Manufacturing is a 2000 ohm linear wire wound potentiometer with a rated power dissipation of 12W. It has a max operating temperature of 350°C and can be used for chassis mount applications requiring precise resistance control.
RK27112A00AK
Alps Alpine
Alps Alpine RK27112A00AK is a linear potentiometer with 100k ohm resistance, 20% tolerance, and 0.05W power dissipation. It has a shaft actuator, through-hole mounting, and PCB package style. Ideal for applications requiring precise voltage or current control in electronic circuits.
72RXR100LF
Tt Electronics Plc
72RXR100LF by Tt Electronics Plc is a CERMET trimmer pot with 100 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for adjusting voltage levels with an operating range of -55 to 125 °C. The linear law of resistance and screw actuator make it ideal for precise adjustments in electronic circuits.
RT025AS4700KB
Vishay Intertechnology's RT025AS4700KB is a 470 ohm linear wire wound potentiometer with 10% tolerance. Operating voltage of 108V, rated power dissipation of 25W, and temperature range from -55 to 320 °C make it ideal for panel mount applications requiring precise resistance control.
3382G-1-252G
Bourns
POTENTIOMETER;
3266W-1-502LF
Bourns 3266W-1-502LF is a CERMET trimmer resistor with 12 turns, 5000 ohm resistance, and linear law. It operates b/w -55 to 150 °C and has a power dissipation of 0.25 W. Ideal for applications requiring precise resistance adjustments in electronic circuits.
89PR10KLF
89PR10KLF by Tt Electronics Plc is a CERMET variable resistor with 10000 ohm resistance, rated for temperatures b/w -55 to 125 °C. It features a linear law of resistance and is ideal for PCB mount applications due to its rectangular package shape and through-hole mounting type.
3296W-1-102RLF
Bourns 3296W-1-102RLF is a CERMET trimmer resistor with 1000 ohm resistance, 25 turns, and linear law. Ideal for applications requiring precise resistance adjustments in circuits with operating voltage up to 300V. Features include multi-turn construction, through-hole mounting, and temperature coefficient of 100 ppm/°C.
RV6LAYSA103A
Precision Electronics
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
PT10LV10-103A2020-S
Piher Sensors And Controls Sa
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .15 W; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %;
3299X-1-501LF
Bourns 3299X-1-501LF is a CERMET trimmer pot with 500 ohm resistance, 25 turns, and linear resistance law. It has a max operating temperature of 125°C and is ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
3266P-1-104LF
Bourns 3266P-1-104LF is a CERMET trimmer resistor with 12 turns, 100k ohm resistance, and linear law. It operates b/w -55 to 150 °C and has a tolerance of 10%. Ideal for applications requiring precise resistance adjustments in circuits with up to 300V operating voltage.
3296W-1-473LF
Bourns 3296W-1-473LF is a linear trimmer resistor with 47000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has 25 turns and operates b/w -55 to 125 °C. Ideal for applications requiring precise resistance adjustments in electronic circuits.
3362U-1-104LF
Bourns 3362U-1-104LF is a CERMET trimmer resistor with 100k ohm resistance, linear law, and 10% tolerance. It has a rated power dissipation of 0.5W and operates b/w -55 to 125°C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
3590S-2-503L
The Bourns 3590S-2-503L is a 10-turn wire wound potentiometer with a linear resistance law. It has a resistance of 50k ohm and can handle a max power dissipation of 2W. This panel mount resistor is commonly used in applications requiring precise control over electrical currents.
3314G-1-102E
The Bourns 3314G-1-102E is a CERMET variable resistor with 1000 ohm resistance, linear law, and 20% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.25 W. Ideal for applications requiring precise voltage control in automotive electronics due to AEC-Q200 standard compliance.
P11S1FBGGSX00151KA
POTENTIOMETER; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
3048L-5-102
The Bourns 3048L-5-102 is a compact variable resistor with a resistance of 1000 ohm. It uses conductive plastic technology and has a temperature coefficient of 1000 ppm/°C. It is commonly used in PCB mount applications for its high operating temperature range of -55 to 125 °C.
RJR26FW502R
TRIMMER; Mounting Type: PCB MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
1-1624217-0
TE Connectivity
TE Connectivity's 1-1624217-0 is a linear carbon film potentiometer with 10000 ohm resistance, 10% tolerance, and 0.4 W power dissipation. It has a circular package with horizontal actuator orientation and shaft actuator type. Ideal for through hole mounting applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3224W-1-103E
Bourns 3224W-1-103E is a linear trimmer resistor with 12 turns and 10000 ohm resistance. It operates b/w -65 to 150 °C, suitable for surface mount applications requiring precise resistance adjustments in electronic circuits. The CERMET technology and screw actuator make it ideal for compact designs with a tolerance of 10%.
3224W-1-502E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3224W-1-102E
Bourns 3224W-1-102E is a linear trimmer resistor with 1000 ohm resistance, 10% tolerance, and 0.25 W power dissipation. It has 12 turns, operates b/w -65 to 150 °C, and offers a temperature coefficient of 100 ppm/°C. Ideal for applications requiring precise resistance adjustments in compact SMT designs.
3224W-1-501E
The Bourns 3224W-1-501E is a 500 ohm linear trimmer resistor with 12 turns and a temperature coefficient of 100 ppm/°C. It has a rated power dissipation of 0.25 W, suitable for surface mount applications in electronic circuits requiring precise resistance adjustments. The resistor operates within a wide temperature range from -65 to 150 °C, making it versatile for various industrial and consumer electronics.
3224W-1-104E
The Bourns 3224W-1-104E is a linear trimmer resistor with 12 turns, 100k ohm resistance, and 10% tolerance. It operates b/w -65°C to 150°C, making it suitable for temperature-sensitive applications. With SMT package style and J bend terminals, it's ideal for surface mounting in various electronic devices.
3224J-1-103E
Bourns 3224J-1-103E is a linear trimmer pot with 12 turns, 10000 ohm resistance, and 10% tolerance. It is used in SMT applications for precise resistance adjustments in electronic circuits.
3224W-1-203E
The Bourns 3224W-1-203E is a linear trimmer resistor with 12 turns and 20000 ohm resistance. It has a temperature coefficient of 100 ppm/°C and can operate b/w -65 to 150 °C. Ideal for surface mount applications requiring precise resistance adjustments in compact spaces.
3224W-1-202E
The Bourns 3224W-1-202E is a CERMET trimmer resistor with 12 turns and linear resistance law. It has a resistance of 2000 ohm, rated power dissipation of 0.25 W, and operates b/w -65 to 150 °C. Ideal for applications requiring precise resistance adjustments in compact SMT packages.
3224W-1-503E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3224W-1-101E
Bourns 3224W-1-101E is a 100 ohm linear trimmer resistor with 12 turns and 10% tolerance. It operates b/w -65 to 150 °C, ideal for surface mount applications requiring precise resistance adjustments in compact spaces. The cermet technology and screw actuator make it suitable for various electronic devices.
3224X-1-502E
Bourns 3224X-1-502E is a CERMET trimmer pot with 12 turns, 5000 ohm resistance, and linear law. Ideal for SMT applications, it has a temperature range of -65 to 150 °C and tolerance of 10%.
3224J-1-503E
3224J-1-502E
Bourns 3224J-1-502E is a linear trimmer pot with 12 turns, 5000 ohm resistance, and 10% tolerance. It is a surface mount variable resistor suitable for applications requiring precise resistance adjustments in compact electronic devices. With a temperature coefficient of 100 ppm/°C, it operates b/w -65 to 150 °C temperatures.
3224W-1-201E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3224W-1-253E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 25000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3224J-1-104E
Bourns 3224J-1-104E is a linear trimmer pot with 12 turns and resistance of 100k ohm. It operates b/w -65 to 150 °C, making it ideal for precise adjustments in electronic circuits. With SMT package style and surface mounting type, it's suitable for compact applications requiring high precision.
3224J-1-102E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3224G-1-103E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
3224J-1-100E
Bourns 3224J-1-100E is a linear trimmer pot with 12 turns, 10 ohm resistance, and 10% tolerance. It operates b/w -65 to 150 °C and has a power dissipation of 0.25 W. Ideal for precise resistance adjustments in electronic circuits requiring compact SMT components.
3224W-1-504E
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 500000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved