Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
1130-100K-RC by Bourns is a fixed inductor with 10uH nominal inductance, suitable for high current applications. It features a max rated current of 17A and operates b/w -55°C to 105°C. With a bobbin core construction and ferrite material, it offers low DC resistance at 0.006 ohm for general purpose use.
Median Price
$8.870
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$6.340
1k+ parts
$6.280
10k+ parts
-
DigiKey
$9.510
$6.826
$5.591
$5.487
Master Electronics
$6.250
$5.690
Verical
VNN
Nova Conductors
Electro Sonic
$7.070
$6.150
$5.890
IBS Electronics
$8.766
$7.980
Right Parts Inc.
Inventory MP
Bristol Electronics
Ampacity Inc.
$4.570
QUARKTWIN TECHNOLOGY LTD
Netroflash
Perfect Parts
The small lead diameter allows for easy soldering and connection, making the installation process more convenient.
Radial terminal placement offers better stability and makes it easier to mount the inductor on a circuit board, providing improved performance.
Using a bobbin core construction ensures stability and reliability in high current applications, making it suitable for demanding environments.
With a nominal inductance of 10uH, this inductor is ideal for applications requiring high current handling capabilities such as power supplies and voltage regulators.
The high maximum rated current of 17A makes this inductor suitable for high power applications where reliability and performance are crucial.
The ferrite core material offers high magnetic permeability, low core losses, and excellent stability over a wide temperature range, making it a reliable choice for various applications.
Fixed Inductors 1130-100K-RC attributes and parameters. Explore more Fixed Inductors devices from Bourns
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Test Frequency:
Package Shape:
Lead Diameter:
Lead Length:
Lead Spacing:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Diameter:
JESD-609 Code:
1130-100K-RC Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
Plessey Semiconductors Discrete Components Div
Other Transistors;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99WT1G
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
UP2B-470-R
Coiltronics
GENERAL PURPOSE INDUCTOR; Package Style (Meter): SMT; DC Resistance: .1388 ohm; Case or Size Code: 5541; Maximum Rated Current: 1.4 A; Core Material: Ferrite;
PA4334.392NLT
Pulse Electronics
PA4334.392NLT by Pulse Electronics is a shielded, dual-ended power inductor with 3.9uH nominal inductance and 1A max rated current. Ideal for general purpose applications, it features a self-resonance frequency of 53MHz and operates b/w -40°C to 125°C efficiently in SMT packages.
DR127-220-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
MLZ1608N100LT
TDK
TDK's MLZ1608N100LT is a 10uH fixed inductor with dual-ended terminals, suitable for RF applications. It features a max operating temperature of 125°C, 0.3A rated current, and 20% tolerance. This shielded, surface-mount inductor has a compact 0603 size and ferrite core material.
5609
Bourns
The Bourns 5609 is a fixed inductor with 2500 uH nominal inductance, suitable for RF applications. Featuring radial terminal placement, it has a max operating temperature of 105°C and DC resistance of 2.04 ohm. Ideal for general purpose use, this cylindrical package inductor has a lead spacing of 18 mm.
#919AS-1R0N=P3
Murata Manufacturing
Murata Manufacturing's #919AS-1R0N=P3 is a shielded SMT inductor with 1uH nominal inductance, 9.7A max current, and 30% tolerance. Ideal for general purpose applications requiring high current handling in compact spaces.
LQW15AN3N6B8ZD
Murata Manufacturing's LQW15AN3N6B8ZD is a fixed inductor with 0402 size, 0.0036 uH nominal inductance, and 1.95 A max rated current. Ideal for RF applications, it features dual-ended terminals and operates b/w -55 to 125 °C with a Q factor of at least 30 at 250 MHz.
12LRS155C
12LRS155C by Murata Manufacturing is a shielded fixed inductor with a nominal inductance of 1500 uH and max rated current of 0.31 A. It is a general purpose inductor suitable for various applications, offering a cylindrical package with radial terminal placement.
B82732F2451B001
The TDK B82732F2451B001 is a general purpose inductor with 100000 uH nominal inductance, 2.93 ohm DC resistance, and 0.45 A max rated current. It is used as a power inductor for various applications due to its ferrite core material and dual in-line terminal placement.
B82731M2501A030
The TDK B82731M2501A030 is a radial fixed inductor with 47000 uH nominal inductance, 2 ohm DC resistance, and 50% tolerance. It is a general purpose power inductor for PCB mount applications, featuring a rectangular package with flat terminals and ferrite core material. Operating temperature ranges from -40 to 125 °C, suitable for various electronic devices requiring up to 0.5 A rated current.
LQM21PHR47NG0D
Murata Manufacturing's LQM21PHR47NG0D is an 0805 SMT fixed inductor with 0.47uH nominal inductance, 1.3A max current, and -55 to 150°C operating temp. Ideal for power applications, it features dual-ended terminals and ferrite core material.
74438335220
Wuerth Elektronik & Kg
Wurth Elektronik 74438335220 is a shielded, dual-ended fixed inductor with 22uH nominal inductance. Ideal for power applications, it has a max rated current of 0.6A and operates b/w -40 to 125°C. Its compact SMT package measures 3x3x1.5mm and features an iron alloy core with self-resonance frequency of 12MHz.
XAL5030-222MEB
Coilcraft
Coilcraft XAL5030-222MEB is a shielded, surface mount inductor with 2.2uH nominal inductance and 9.7A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 38MHz and AEC-Q200 reference standard compliance.
768772222
Wurth Elektronik 768772222 is a radial fixed inductor with 2200 uH nominal inductance, suitable for RF applications. Featuring 0.7 mm lead diameter and 5 mm lead spacing, it has a max operating temperature of 125 °C and self-resonance frequency of 1.2 MHz. Ideal for general purpose use due to its cylindrical package design and ferrite core material.
ARA00499
Tdk-lambda
GENERAL PURPOSE INDUCTOR; No. of Terminals: 4; Package Style (Meter): PCB Mount; Shielded: NO; Surface Mount: NO; Package Height: 29 mm;
4622
The Bourns 4622 is a wirewound fixed inductor with 10uH nominal inductance, suitable for RF applications. It has a max operating temperature of 105°C and rated current of 1.5A, making it ideal for general purpose use in electronics. With a self-resonance frequency of 40MHz and construction using iron core material, it offers high quality factor and performance.
70-3
Coilcraft's 70-3 fixed inductor with 0.15 uH nominal inductance, 1.18 A max current, and 38 min quality factor is ideal for filter choke applications. Featuring axial lead placement and encapsulated construction, it operates b/w -40 to 125 °C with a DC resistance of 0.1 ohm.
IHLP5050FDER4R7M01
Vishay Dale
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Terminal Finish: Tin (Sn);
IHLP2525CZER8R2M01
Vishay Intertechnology
Vishay Intertechnology's IHLP2525CZER8R2M01 is a shielded, surface mount fixed inductor with 8.2uH nominal inductance and 4A max rated current. Ideal for high current applications, this rectangular package inductor operates b/w -55°C to 125°C with a DC resistance of 0.068 ohm.
#FSLB2520-470K
Toko
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; DC Resistance: 5.4 ohm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1130-220K-RC
The Bourns 1130-220K-RC is a radial fixed inductor with 22uH nominal inductance, suitable for high current applications. It has a max rated current of 13.5A, operating temperature range from -55 to 105°C, and features a ferrite core construction.
1130-272K-RC
The Bourns 1130-272K-RC is a fixed inductor with 2700 uH nominal inductance, suitable for high current applications. Featuring a bobbin core construction and ferrite material, it has a max rated current of 1.3 A and operates b/w -55 to 105 °C. With radial terminal placement and cylindrical package shape, this general purpose inductor is ideal for various electronic circuits.
1130-332K-RC
The Bourns 1130-332K-RC is a fixed inductor with 3300 uH nominal inductance, suitable for high current applications. It features a radial package style, ferrite core material, and can handle up to 1.3 A of max rated current. With a DC resistance of 1.27 ohm and operating temperature range from -55 to 105 °C, it is ideal for general purpose inductor use.
1130-101K-RC
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Package Style (Meter): Radial; Shielded: NO; Surface Mount: NO;
1130-471K-RC
1130-100K
Jw Miller Magnetics
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; No. of Functions: 1;
1130-102K-RC
1130-120K-RC
1130-121K-RC
1130-122K-RC
1130-151K-RC
1130-152K-RC
1130-101K
1130-102K
1130-120K
1130-151K
1130-152K
1130-1R2M
1130-1R5M
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved