Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: S558-5999-T4-F; No. of Functions: 1; Length: 15.24 mm; Turns Ratio (Np:Ns): 1CT:1CT; 1CT:1CT;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Ampacity Inc.
1+ parts
$602.000
100+ parts
1k+ parts
10k+ parts
Pulse & Datacom Transformers S558-5999-T4-F attributes and parameters. Explore more Pulse & Datacom Transformers devices from Bel Fuse
Additional Features:
Application:
Height:
Length:
Manufacturer Series:
Mounting Feature:
No. of Functions:
Dimensions:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
S558-5999-T4-F Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Founded in 1949, Bel designs, manufactures and markets a broad array of products that power, protect and connect electronic circuits. With over 70 years of experience, Bel has reliably demonstrated the ability to succeed in a variety of product areas.
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
Meritek Electronics
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
H1197NL
Pulse Electronics
H1197NL by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage. It is designed for 10/100 BASE-TX Ethernet applications, featuring dimensions of L12.70xB6.73xH5.97 mm and matte tin terminal finish. Operating temperature ranges from 0 to 70°C, suitable for surface mount installations in various networking setups.
H5008NL
H5008NL by Pulse Electronics is a Datacom Transformer with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and inductance of 350uH. Ideal for applications like 1000BASE-T, this transformer operates b/w -40°C to +70°C with dimensions of L15.24xB13.64xH5.47mm and a max frequency of 100000KHz.
Q1553-22
Q1553-22 by Pulse Electronics is a pulse transformer with dimensions of 12.7x8.89x6.35 mm, operating b/w -55°C to 130°C. It features a turns ratio of 1CT:1.41CT and is designed for through-hole mounting applications in pulse and datacom systems.
1017C
Murata Manufacturing
Murata Manufacturing's 1017C is a pulse transformer with 4000V isolation voltage, 800uH primary inductance, and 130 V-us min ET product. It is used for datacom applications due to its through-hole mounting feature and compact dimensions of 15.75mm x 15.06mm x 15.06mm.
HM2103NL
HM2103NL by Pulse Electronics is a DATACOM TRANSFORMER with 150uH inductance, 4300V isolation voltage, and AEC-Q200 approvals. It operates b/w -40 to 125°C and has a nominal input voltage of 1000V. Ideal for surface mount applications in pulse & datacom systems.
SM51625EL
Bourns
The Bourns SM51625EL is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 80uH primary inductance. Ideal for LAN, 10/100/1000 BASE-T, and Ethernet applications. It operates b/w -40°C to 85°C with dimensions of L17.55xB12.2xH6.0mm for surface mounting method.
750871010
Wuerth Elektronik & Kg
The Wuerth Elektronik & Kg 750871010 is a Datacom Transformer with an isolation voltage of 4000V, inductance of 3300uH, and turns ratio of 14.36:1. It is designed for applications requiring reliable pulse and data communication transformations, featuring through-hole mounting and dimensions of L24.0xB20.0xH16.0mm. Operating temperatures range from -40°C to 125°C, making it suitable for various industrial environments.
TG110-S050N2
Halo Electronics
TG110-S050N2 by Halo Electronics is a Datacom Transformer with 2 functions, 1500V isolation voltage, and 2.5ns max pulse rise time. Ideal for Ethernet applications, it operates b/w 0-70°C and has dimensions of L12.7xB7.11xH5.08mm for surface mount installation.
ISRA-0239-D502
Schurter Ag
Schurter Ag's ISRA-0239-D502 is a VDE-approved pulse transformer with 3200V isolation voltage, 100ns max pulse rise time, and 2200uH primary inductance. Ideal for datacom applications, it operates b/w -25°C to 100°C, features surface mounting, and has dimensions of L22.7xB22.3xH14.0 (mm).
1009
Newport Components
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Minimum ET Product: 550 V-us; Dimensions: 15.06mm X 15.06mm X 15.75mm;
7490120110
7490120110 by Wurth Elektronik is a Pulse & Datacom Transformer with 1500V isolation voltage, 350uH inductance, and dimensions of L12.7xB9.27xH5.8 (mm). Ideal for applications like 10/100 BASE-TX, AUTOMDIX, and LAN due to its surface mount feature and turns ratio of 1CT:1CT. Operating temperature ranges from -40°C to 85°C.
TG1G-E012NZLF
TG1G-E012NZLF by Halo Electronics is a pulse & datacom transformer with 4 functions. It has an isolation voltage of 1500 V and primary inductance of 350 uH. This transformer is suitable for applications such as 10/100 BASE-TX Ethernet, with a temperature range of -40 to 85 °C.
DCT20EFD-U32S003
TDK
DCT20EFD-U32S003 by TDK is a DATACOM TRANSFORMER with 1000V Isolation Voltage, 10uH Inductance, and 1:10 Turns Ratio. It is designed for surface mount applications in pulse and data communication systems.
CR7983-CLD
Coilcraft
CR7983-CLD by Coilcraft is a Pulse & Datacom Transformer with 5000V isolation voltage, 256uH inductance, and 1:2 turns ratio. Ideal for data communication applications due to its surface mounting feature and nominal input voltage of 5V. Operating temperature ranges from -40°C to 125°C.
78250MC
78250MC by Murata Manufacturing is a Pulse & Datacom Transformer with 1500V isolation voltage, 1000uH inductance, and 50V-us min ET product. It is used for RS-232 data interface applications, operates b/w -40 to 85 °C temperatures, and features surface mounting method.
100B-1003XNLT
Inrcore
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; No. of Functions: 1; Maximum Operating Temperature: 125 Cel; Width: 6.98 mm;
8461
Api Technologies
8461 by Api Technologies is a DATACOM TRANSFORMER with 2 functions and an isolation voltage of 1500 V. With primary inductance of 350 uH, it is ideal for applications such as 10/100 BASE-TX LAN networks. This surface mount transformer has dimensions of L28.57 x W16.26 x H5.84 mm, making it suitable for compact electronic devices.
14240R
Dialog Semiconductor
14240R by Dialog Semiconductor is a DATACOM TRANSFORMER with approvals from UL, CSA, and TUV. It operates b/w -40°C to 85°C, features MATTE TIN terminal finish, and is through-hole mounted. Ideal for pulse & datacom applications due to its robust design and wide temperature range suitability.
749012011
749012011 by Wurth Elektronik is a Pulse & Datacom Transformer with an Isolation Voltage of 1500V, Insertion Loss of 1dB, and Primary Inductance of 350uH. It is designed for applications in 10/100 BASE-T networks, featuring dimensions of 17.1mm x 14.75mm x 8.4mm and a temperature range from 0°C to 70°C.
PM-DB2745L
Holt Integrated Circuits
PM-DB2745L by Holt Integrated Circuits is a pulse and datacom transformer with MIL-STD-1553 approval. It has 1 primary winding and 3 secondary windings, with an impedance of 4000 ohms. This surface mount transformer is commonly used for data bus interface applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Bel Fuse
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved