Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bel Fuse 0685-2500-01 is a 1206 size fuse with rated voltage of 125V and current of 2.5A. With very fast blow characteristic, it offers circuit protection in applications requiring electric fuses. Operating temperature range from -55°C to 125°C ensures reliable performance in various environments.
Median Price
$0.200
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.330
100+ parts
$0.255
1k+ parts
$0.180
10k+ parts
-
Arrow
Master Electronics
$0.146
Verical
$0.186
Avnet
$0.289
Nova Conductors
Vyrian
Electro Sonic
$0.143
IBS Electronics
$0.204
VNN
PC Components Company LLC
Bristol Electronics
Ampacity Inc.
$0.118
Aranea Global
$0.176
$0.169
Argo Parts USA
$0.175
Continental Prestige Electronics
Aztec Data Supply Inc.
$12.195
Glotronic Ltd.
Perfect Parts
Tape and reel packaging allows for easy handling and automated pick-and-place assembly, making this fuse convenient for mass production.
The compact size of 3.2mm makes it suitable for applications where space is limited, offering a space-efficient solution for circuit protection.
With a rated voltage of 125V, this fuse is ideal for low to medium voltage applications, providing reliable protection against overcurrent situations.
The 2.5A rated current allows for adequate protection while still allowing current to flow within safe limits, safeguarding the circuit components against damage.
With a maximum operating temperature of 125°C, this fuse can withstand high temperatures, ensuring reliable performance even in demanding environments.
The very fast blow characteristic of this fuse ensures quick response to overcurrent conditions, effectively protecting the circuit and preventing damage to connected devices.
The terminal finish of matte tin with nickel barrier offers enhanced conductivity and corrosion resistance, ensuring reliable electrical connections for long-term performance.
With a rated breaking capacity of 100A, this fuse can safely interrupt high fault currents, preventing damage to the circuit and ensuring safety in case of a fault.
Fuses 0685-2500-01 attributes and parameters. Explore more Fuses devices from Bel Fuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated Voltage:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Finish:
Packing Method:
0685-2500-01 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Founded in 1949, Bel designs, manufactures and markets a broad array of products that power, protect and connect electronic circuits. With over 70 years of experience, Bel has reliably demonstrated the ability to succeed in a variety of product areas.
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LL4148
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
0297015WXNV
Littelfuse
Littelfuse 0297015WXNV fuse with 270J joule integral, 15A rated current, and 32V DC voltage. Ideal for electric circuit protection in applications requiring inline mounting, such as automotive and industrial electronics. Operating temperatures range from -40°C to 125°C.
FRN-R-40
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 40 A; Terminal Shape: END CAP;
SF-0603S050-2
Bourns SF-0603S050-2 fuse, rated 0.5A and 50V DC, with slow blow characteristic and 5-second trip time. Ideal for circuit protection in electronics due to compact 1.6mm x 0.8mm x 0.45mm size and surface mounting feature. Compliant with CUL and UL standards for reliable performance in a range of applications.
JJS-500
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 500 A; Terminal Shape: TAB/BLADE; Manufacturer Series: JJS;
FWS-10A20F
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1400 V; Rated DC Voltage: 1000 V; Rated Current: 10 A; Terminal Shape: END CAP;
Eaton Corporation
The Eaton Corporation JJS-500 fuse, rated at 600V and 500A, features a very fast blow characteristic with a breaking capacity of 200kA. With TAB/BLADE terminals and dimensions of 101.2mm x 45.2mm, it is commonly used for electric circuit protection in various applications meeting CE, CSA, and UL standards.
KTK-R-25
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 25 A; Terminal Shape: END CAP; Terminal Finish: NICKEL;
LP-CC-10
LP-CC-10 by Eaton Corp is a 10A time delay electric fuse with 600V AC & 150V DC ratings. Measuring 10x38.1mm, it has a breaking capacity of 200kA. Commonly used in inline/holder setups for circuit protection in various applications.
0287005.L
Littelfuse 0287005.L fuse has a Nominal Joule Integral of 26 J, Trip Time of 0.08 sec, and Rated Current of 5 A. It is used for circuit protection in applications requiring a rated DC voltage of 32 V, with dimensions of 19.1mm x 5.1mm x 12.3mm and terminal shape TAB/BLADE.
ATM30
Mersen S A
Mersen S A's ATM30 fuse, rated 30A and 600V, features fast blow characteristic with 100kA breaking capacity. It is a midget size fuse with end cap terminal shape, suitable for electric circuit protection in inline/holder mounting applications.
0453003.MR
Littelfuse 0453003.MR fuse, rated at 125V and 3A, offers very fast blow characteristic with a trip time of 5s. Nano-sized with dimensions of 6.1mm x 2.69mm x 2.69mm, it is ideal for circuit protection in applications requiring surface mounting method and wraparound terminal shape.
0453005MR
Littelfuse 0453005MR Nano fuse with 5A current rating, 125V AC/DC voltage, and very fast blow characteristic. Ideal for circuit protection in electronics, rated at -55 to 125°C operating temperature range. TR packing method, CSA/PSE/UL standards compliant for surface mount applications.
JJS-25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 25 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
3403.0166.24
Schurter Ag
Schurter Ag's 3403.0166.24 fuse, rated at 1A and 250V, features a time lag blow characteristic with dimensions of 10.1mm x 3mm x 3mm. Suitable for electric circuit protection in various applications due to its high breaking capacity of 200A and wide temperature range from -55°C to 125°C.
SBS15
The Mersen S A SBS15 fuse, rated at 15A and 600V, features a fast blow characteristic with a breaking capacity of 100kA. With dimensions of 10mm x 35mm, it is designed for inline mounting applications to provide electric circuit protection according to CSA and UL standards.
FNQ-R-1-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.5 A; Terminal Shape: END CAP; Manufacturer Series: FNQ-R;
FWP-63A22F
The Eaton Corporation FWP-63A22F fuse, with a rated current of 63A and rated breaking capacity of 200kA, is ideal for circuit protection in applications requiring a nominal joule integral of 280J. With a rated AC voltage of 700V and rated DC voltage of 500V, this electric fuse features dimensions of 22.2mm x 58mm and an end cap terminal shape for easy installation in inline/holder mounting configurations.
FNQ-R-3/4
Eaton Corporation's FNQ-R-3/4 fuse, rated at 600V AC, features a 0.75A current and time delay blow characteristic. With nickel terminal finish and 200kA breaking capacity, it is ideal for electric circuit protection in various applications. Measuring 10.3mm x 38.1mm, this CC-class fuse is commonly used in inline or holder mounting setups.
0218016.HXP
Littelfuse 0218016.HXP fuse has 1955J Joule Integral, rated 250V AC voltage, and 16A current. With time lag blow characteristic, it is used for electric circuit protection in applications requiring a max operating temperature of 125°C.
8020.5021
Schurter Ag's 8020.5021 fuse, rated at 10A and 500V, offers a time lag blow characteristic with a nominal joule integral of 700J. Ideal for circuit protection in applications requiring an electric fuse with a rated breaking capacity of 1500A and operating temperatures ranging from -40°C to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0685T5000-01
Bel Fuse
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 63 V; Rated DC Voltage: 63 V; Rated Current: 5 A; Terminal Shape: WRAPAROUND;
0685T1000-01
Bel Fuse 0685T1000-01 is a 1206 size fuse with 1A rated current and 63V DC/AC voltage. It has slow blow characteristic, 0.12J nominal joule integral, and 0.002s trip time. Ideal for circuit protection in automotive electronics due to AEC-Q200 compliance and TUV/UL standards.
0685T2000-01
Bel Fuse 0685T2000-01 is a 1206 size fuse with 2A rated current and 63V DC voltage. It has a slow blow characteristic, 0.63J nominal joule integral, and 0.002s trip time. Ideal for circuit protection in automotive applications due to AEC-Q200 compliance and TUV/UL standards.
0685T3000-01
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 63 V; Rated DC Voltage: 63 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND;
0685T4000-01
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 63 V; Rated DC Voltage: 63 V; Rated Current: 4 A; Terminal Shape: WRAPAROUND;
0685H9300-01
ELECTRIC FUSE; Terminal Finish: TIN OVER NICKEL; JESD-609 Code: e3;
0685T1500-01
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 63 V; Rated DC Voltage: 63 V; Rated Current: 1.5 A; Terminal Shape: WRAPAROUND;
0685T3500-01
Bel Fuse 0685T3500-01 is a 1206 size fuse with 3.5A rated current and 63V DC/AC voltage. It has slow blow characteristic, trip time of 0.002s, and rated breaking capacity of 50A. Ideal for circuit protection in automotive applications due to AEC-Q200 compliance and surface mounting feature.
0685F0250-01
ELECTRIC FUSE; Rated Current: .25 A; JESD-609 Code: e3; Reference Standard: UL; Fuse Size: 1206; Packing Method: TAPE AND REEL;
0685T0750-01
Bel Fuse's 0685T0750-01 is a surface mount fuse with a rated current of 0.75 A and a rated voltage of 63 V. It has a slow blow characteristic and is suitable for circuit protection in various applications.
0685P9500-01
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 50 A; Terminal Shape: WRAPAROUND;
0685T2500-01
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 63 V; Rated DC Voltage: 63 V; Rated Current: 2.5 A; Terminal Shape: WRAPAROUND;
0685H9250-01
0685T1250-01
Bel Fuse 0685T1250-01 is a 1206 size fuse with 1.25A rated current and 63V rated voltage. It has a slow blow characteristic, 0.2J nominal joule integral, and trip time of 0.002s. Ideal for circuit protection in automotive electronics, meeting AEC-Q200, TUV, and UL standards.
0685-0250-01
ELECTRIC FUSE; Rated Current: .25 A; Body Height: .57 mm; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Reference Standard: CSA, UL; Dimensions: 3.2mm x 1.58mm x 0.57mm;
0685-0750-01
ELECTRIC FUSE; Rated Current: .75 A; Dimensions: 3.2mm x 1.58mm x 0.57mm; Body Width: 1.58 inch; Maximum Operating Temperature: 125 Cel; Rated Breaking Capacity: 100 A;
0685-1250-01
ELECTRIC FUSE; Rated Current: 1.25 A; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Body Length/Diameter: 3.2 mm; Rated Breaking Capacity: 100 A; Reference Standard: CSA, UL;
0685-2000-01
ELECTRIC FUSE; Rated Current: 2 A; Minimum Operating Temperature: -55 Cel; Reference Standard: CSA, UL; JESD-609 Code: e3; Rated Breaking Capacity: 100 A;
0685-3000-01
ELECTRIC FUSE; Rated Current: 3 A; Packing Method: TR; Body Width: 1.58 inch; Body Length/Diameter: 3.2 mm; Dimensions: 3.2mm x 1.58mm x 0.57mm;
0685-3500-01
ELECTRIC FUSE; Rated Current: 3.5 A; Rated Voltage: 125 V; Dimensions: 3.2mm x 1.58mm x 0.57mm; Rated Breaking Capacity: 100 A; Blow Characteristic: VERY FAST;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved