Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bel Fuse 0685P9500-01 is a fast blow electric fuse with 500J nominal joule integral and 32V rated AC/DC voltage. Sized at 1206, it has a rated current of 50A and breaking capacity of 200A. Ideal for circuit protection in various applications requiring surface mount fuses.
Median Price
$0.525
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.940
100+ parts
$0.662
1k+ parts
$0.495
10k+ parts
$0.400
DigiKey
$1.130
$0.670
$0.514
Avnet
-
$0.432
Heilind Electronics
Master Electronics
$0.478
$0.427
Verical
$0.621
$0.555
Interstate Connecting
Nova Conductors
$0.466
Vyrian
IBS Electronics
$0.552
$0.507
VNN
Ampacity Inc.
$0.406
Aranea Global
$0.457
$0.439
Continental Prestige Electronics
Argo Parts USA
$0.452
Aztec Data Supply Inc.
$8.140
Advanced Electronics
$10.986
$9.997
$9.009
Authorized Procurement Solutions
Provides high level of energy absorption, offering reliable protection for electrical circuits.
Designed to handle standard AC voltage levels effectively and safely.
Convenient packing method for easy handling and storage.
Compact size allows for easy installation in various spaces.
Optimal width for efficient electrical conductivity and heat dissipation.
Matches standard voltage requirements, ensuring compatibility with different systems.
Common size that fits a wide range of applications for added convenience.
Secure terminal shape that provides a reliable connection without the risk of disconnection.
Low profile design for space-saving installation in tight areas.
Able to handle high current loads safely and effectively.
Can withstand relatively high temperatures without compromising performance.
Provides rapid response to overcurrent conditions, offering quick protection to circuits.
Capable of functioning in extremely cold environments, making it versatile for different applications.
Effective circuit protection against overcurrent situations, safeguarding equipment and components.
High breaking capacity ensures reliable performance under high fault currents.
Suitable for DC voltage systems, offering protection in a variety of configurations.
Easy surface mounting for quick and convenient installation.
Quick response time to prevent arcing and potential damage to the circuit.
Compliance with industry standards for safety and quality assurance.
Fuses 0685P9500-01 attributes and parameters. Explore more Fuses devices from Bel Fuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Rated Voltage:
Minimum Pre Arcing Time:
Body Diameter:
Body Height:
Body Width:
Blow Characteristic:
Fuse Size/Group:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Mounting Feature:
Packing Method:
0685P9500-01 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
Founded in 1949, Bel designs, manufactures and markets a broad array of products that power, protect and connect electronic circuits. With over 70 years of experience, Bel has reliably demonstrated the ability to succeed in a variety of product areas.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
Micro Commercial Components
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
Bkc Semiconductors
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Infinex
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
RC0603JR-070RL
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
Goodwork Semiconductor
DMM-B-44/100
Eaton Corporation
The Eaton Corporation DMM-B-44/100 fuse is a 0.44A fast blow electric fuse with a rated voltage of 1000V AC/DC and breaking capacity of 10kA. It features nickel terminal finish, UL standard compliance, and is suitable for inline mounting applications in circuit protection systems.
37215000411
Littelfuse
Littelfuse 37215000411 fuse has a rated current of 5A, trip time of 0.02s, and nominal joule integral of 115J. It is used for circuit protection in applications requiring a time lag blow characteristic at rated AC voltage of 250V.
ATC-30
Eaton Corporation's ATC-30 fuse, rated at 30A and 32V, offers fast blow characteristic with a trip time of 0.1s. With dimensions of 19.3mm x 5.25mm x 12.5mm, it is ideal for electric circuit protection in applications requiring a max operating temperature of 100°C and UL reference standard compliance.
7012540.5
Siba
Siba 7012540.5 is a 5A electric fuse with a rated AC voltage of 600V and a blow characteristic of VERY FAST. It has dimensions of 6.35mm x 31.8mm and is commonly used for circuit protection in inline/holder mounting applications.
JLLS050.T
Littelfuse JLLS050.T fuse, rated 50A/600V, fast blow characteristic. Ideal for electric circuit protection with 200kA breaking capacity. Suitable for inline mounting in CE/CSA/UL compliant applications.
170M1565
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated DC Voltage: 690 V; Rated Current: 63 A; Terminal Shape: TAB/BLADE;
BK/ATC-30
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 30 A; Terminal Shape: TAB/BLADE;
TCF40
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 40 A; Terminal Shape: TAB/BLADE;
KTK-12
The Eaton Corporation's KTK-12 fuse has a rated voltage of 600V and a rated current of 12A, with fast blow characteristic. It is an electric fuse with dimensions of 10.3mm x 38.1mm, suitable for circuit protection in various applications meeting CSA and UL standards.
SR-5-1A-AP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: PIN WIRE; Body Height: 8.1 mm;
ATM-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: TAB/BLADE; Dimensions: 10.92mm x 3.81mm x 8.81mm;
ATM30
Mersen S A
Mersen S A's ATM30 fuse, rated 30A and 600V, features fast blow characteristic with 100kA breaking capacity. It is a midget size fuse with end cap terminal shape, suitable for electric circuit protection in inline/holder mounting applications.
AJT125N
AJT125N fuse by Mersen S A is a 125A, time delay electric fuse with a rated AC voltage of 600V and rated breaking capacity of 200kA. It features TAB/BLADE terminals, measures 41mm in diameter and 146mm in height, suitable for inline mounting applications. Compliant with CSA, IEC, and UL standards, it is ideal for circuit protection in systems up to 500V DC.
0456040.DRSD
0456040.DRSD by Littelfuse is a NANO fuse with 40A rated current, 1700J nominal joule integral, and 125V AC/DC voltage rating. Ideal for circuit protection in applications requiring fast blow characteristic, such as electronics and electrical equipment.
8020.5078
Schurter Ag
The Schurter Ag 8020.5078 fuse is a 6.3x32mm electric fuse with a rated current of 10A and a max operating temperature of 85°C. It has a blow characteristic of VERY FAST and is suitable for circuit protection in applications such as inline/holder mounting in UL and CUL reference standards.
02183.15HXP
The Littelfuse 02183.15HXP fuse is a 3.15A, 250V time lag electric fuse with dimensions of 5x20mm. It has a rated breaking capacity of 35A and a nominal joule integral of 38.15J, making it suitable for circuit protection in various applications requiring supplemental fuses. This fuse meets standards such as CCC, CE, CSA, IEC, KC, PSE, SEMKO, UL, and VDE for reliable performance in inline/holder mounting configurations.
0239002.MXP
0239002.MXP by Littelfuse is a 5x20mm supplemental fuse with a rated current of 2A and max operating temperature of 125°C. It provides circuit protection with a time lag blow characteristic, suitable for applications requiring a rated AC voltage of 250V.
FNQ-R-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .25 A; Terminal Shape: END CAP; Dimensions: 10.3mm x 38.1mm;
FWP-10A14FI
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 700 V; Rated Current: 10 A; Terminal Shape: END CAP;
7010.9810.63
The Schurter Ag 7010.9810.63 fuse is a 7x2mm electric fuse with a rated current of 1A and very fast blow characteristic. It has a max operating temperature of 125°C, suitable for circuit protection in various electronic devices. Compliant with CUL and UL standards, it offers a rated breaking capacity of 300A for reliable performance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0685T5000-01
Bel Fuse
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 63 V; Rated DC Voltage: 63 V; Rated Current: 5 A; Terminal Shape: WRAPAROUND;
0685T1000-01
Bel Fuse 0685T1000-01 is a 1206 size fuse with 1A rated current and 63V DC/AC voltage. It has slow blow characteristic, 0.12J nominal joule integral, and 0.002s trip time. Ideal for circuit protection in automotive electronics due to AEC-Q200 compliance and TUV/UL standards.
0685T2000-01
Bel Fuse 0685T2000-01 is a 1206 size fuse with 2A rated current and 63V DC voltage. It has a slow blow characteristic, 0.63J nominal joule integral, and 0.002s trip time. Ideal for circuit protection in automotive applications due to AEC-Q200 compliance and TUV/UL standards.
0685T3000-01
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 63 V; Rated DC Voltage: 63 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND;
0685T4000-01
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 63 V; Rated DC Voltage: 63 V; Rated Current: 4 A; Terminal Shape: WRAPAROUND;
0685H9300-01
ELECTRIC FUSE; Terminal Finish: TIN OVER NICKEL; JESD-609 Code: e3;
0685T1500-01
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 63 V; Rated DC Voltage: 63 V; Rated Current: 1.5 A; Terminal Shape: WRAPAROUND;
0685T3500-01
Bel Fuse 0685T3500-01 is a 1206 size fuse with 3.5A rated current and 63V DC/AC voltage. It has slow blow characteristic, trip time of 0.002s, and rated breaking capacity of 50A. Ideal for circuit protection in automotive applications due to AEC-Q200 compliance and surface mounting feature.
0685-2500-01
ELECTRIC FUSE; Rated Current: 2.5 A; Body Length/Diameter: 3.2 mm; Rated Breaking Capacity: 100 A; Blow Characteristic: VERY FAST; Rated Voltage: 125 V;
0685F0250-01
ELECTRIC FUSE; Rated Current: .25 A; JESD-609 Code: e3; Reference Standard: UL; Fuse Size: 1206; Packing Method: TAPE AND REEL;
0685T0750-01
Bel Fuse's 0685T0750-01 is a surface mount fuse with a rated current of 0.75 A and a rated voltage of 63 V. It has a slow blow characteristic and is suitable for circuit protection in various applications.
0685T2500-01
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 63 V; Rated DC Voltage: 63 V; Rated Current: 2.5 A; Terminal Shape: WRAPAROUND;
0685H9250-01
0685T1250-01
Bel Fuse 0685T1250-01 is a 1206 size fuse with 1.25A rated current and 63V rated voltage. It has a slow blow characteristic, 0.2J nominal joule integral, and trip time of 0.002s. Ideal for circuit protection in automotive electronics, meeting AEC-Q200, TUV, and UL standards.
0685P9250-01
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 50 V; Rated DC Voltage: 50 V; Rated Current: 25 A; Terminal Shape: WRAPAROUND;
0685P9200-01
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 50 V; Rated DC Voltage: 50 V; Rated Current: 20 A; Terminal Shape: WRAPAROUND;
0685P9100-01
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 50 V; Rated DC Voltage: 50 V; Rated Current: 10 A; Terminal Shape: WRAPAROUND;
0685P9120-01
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 50 V; Rated DC Voltage: 50 V; Rated Current: 12 A; Terminal Shape: WRAPAROUND;
0685P9150-01
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 50 V; Rated DC Voltage: 50 V; Rated Current: 15 A; Terminal Shape: WRAPAROUND;
0685P9400-01
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 40 A; Terminal Shape: WRAPAROUND;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved