Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
A-20041/LP by Assmann Wsw Components is a telecom & datacom connector with body dimensions of 0.52" x 0.459" x 0.709". It features tin termination with nickel barrier, phosphor bronze contacts, and gold mating finish. Ideal for board mounting applications in commercial environments with operating temperatures from -40°C to 125°C.
Median Price
$1.062
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Master Electronics
1+ parts
-
100+ parts
1k+ parts
$0.959
10k+ parts
$0.904
Verical
$1.165
Rutronik
$1.200
Nova Conductors
VNN
IBS Electronics
$0.677
$0.592
$0.566
Vyrian
Rapid Electronics
$0.559
LIBRA Elektronik GmbH
Aztec Data Supply Inc.
$6.681
AZTECH Wire
$13.619
Continental Prestige Electronics
GreenTree Electronics
Glotronic Ltd.
Perfect Parts
Argo Parts USA
Aranea Global
Compact size allows for space-saving installation in tight spaces.
Slim design enables easy connection in crowded equipment racks.
Provides a reliable and durable connection with good conductivity.
Offers excellent insulation properties for safe and efficient operation.
Allows for use in high-temperature environments without performance degradation.
Known for its high electrical conductivity and corrosion resistance, ensuring long-term reliability.
Provides versatility for connecting multiple devices or signals.
Securely mounts onto PCB for stable connections.
Standard pitch size for easy integration and compatibility with various systems.
Enables easy installation and cable management in confined spaces.
Telecom & Datacom Connectors A-20041/LP attributes and parameters. Explore more Telecom & Datacom Connectors devices from Assmann Wsw Components
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Insulator Material:
JESD-609 Code:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
A-20041/LP Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
The ASSMANN WSW Group is well known as a global system provider for standard and customer-tailored connectors, cable assemblies, heat sinks and assembly services. The ASSMANN WSW Group has more than 50 years of experience in the electromechanical and the thermal management market. The products are available internationally through a global distribution network. The products of the ASSMANN WSW Group are used in both the industrial and automotive sectors. The BCS Group GmbH, as 100% owner of the ASSMANN WSW Group, has mainly produced cable assemblies and lighting technology for the automotive industry since 1993.
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
LL4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
EU2B-YS3103F
Idec
ROTARY SWITCH;
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Semiconductor Ag
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
Pro-an Electronic
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
124019032112A
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR;
897-43-004-90-000000
Mill-max Mfg
897-43-004-90-000000 by Mill-max Mfg is a USB connector with 0.474" body length, 1000000000 ohm insulation resistance, and 750VAC dielectric voltage. Ideal for telecom/datacom applications, it features matte tin over nickel termination finish and polyethylene insulator material.
2500.0010.0
Molex
ZX80-B-5P(30)
Hirose Electric
ZX80-B-5P(30) by Hirose Electric is a USB connector with 5 contacts, gold finish, and liquid crystal polymer insulator. It is used in telecom & datacom applications for board and panel mounting due to its nickel shell and stainless steel material. The connector has a UL flammability rating of 94V-0.
46765-0001
Molex 46765-0001 is a Telecom & Datacom Connector with 0.256" body length, 10000000 ohm insulation resistance, and 200VAC dielectric voltage. Ideal for board mounting applications in telecom and datacom systems due to its gold nickel termination finish, glass-filled LCP insulator, and male contact gender.
98435-111LF
Amphenol's 98435-111LF is a Telecom & Datacom Connector with Matte Tin finish, plastic insulator, and 8 contacts. It is a female jack connector for surface mount applications on boards, meeting UL 94V-0 flammability standards.
87520-0010BLF
The Amphenol Communications Solutions 87520-0010BLF is a USB connector with 4 contacts, rated at 1.5A signal current. It features a dielectric voltage of 750VAC and insulation resistance of 1Gohm, suitable for telecom applications. With a durable design lasting up to 1500 cycles, it offers reliable performance in temperatures ranging from -40°C to 85°C.
RJSAE-5380-02
Amphenol
Amphenol RJSAE-5380-02 is a telecom & datacom connector with 2 ports, 8+8 contacts. Featuring POLYETHYLENE insulator, PHOSPHOR BRONZE contact material, and COPPER ALLOY shell material. Ideal for board mounting with right angle mounting style and solder termination.
1981568-1
TE Connectivity
TE Connectivity 1981568-1 is a USB connector with POLYETHYLENE insulator, TIN finish, and STAINLESS STEEL shell. It has 5 contacts, rated at 1.8A for telecom/datacom applications. Features include solder hold down mounting option and surface mount termination type for durability up to 10000 cycles.
MUSB-05-S-B-SM-A
Samtec
Samtec's MUSB-05-S-B-SM-A is a USB connector with Matte Tin finish, Liquid Crystal Polymer insulator, and 30u plating thickness. Ideal for telecom/datacom applications, it offers 5 contacts, operates b/w -50 to 85°C, and has a durability of 1500 cycles.
SS-641010-NF-K1
Bel Fuse
Bel Fuse SS-641010-NF-K1 is a 10-contact telecom & datacom connector with 0.605"x.505"x.815" dimensions, POLYETHYLENE insulator, and 30u NICKEL/TIN plating. It features FEMALE contacts, SOLDER termination, and UL 94V-0 flammability rating for board mounting applications in telecommunications and data communication systems.
67643-0910
Molex 67643-0910 is a USB connector with gold finish, suitable for telecom/datacom applications. Features include 1.5A signal current, 750VAC dielectric voltage, and -40 to 85°C operating temperature range. Ideal for board mounting with solder termination and UL94V-0 flammability rating.
ZX62-AB-5PA(31)
ZX62-AB-5PA(31) by Hirose Electric is a USB connector with gold termination, liquid crystal polymer insulator, and stainless steel shell. It has 5 contacts, rated for 1.8A signal current, suitable for telecom/datacom applications. With a right-angle mounting style and locking option, it is ideal for board and panel installations in various electronic devices.
ZX80-B-5SA(30)
ZX80-B-5SA(30) by Hirose Electric is a USB connector with 5 contacts, gold termination finish, and liquid crystal polymer insulator. It is used in telecom/datacom applications for board mounting, featuring a stainless steel shell and surface mount termination. The connector has UL flammability rating of 94V-0.
74320-9004
Molex 74320-9004 is a telecom/datacom connector with 24 contacts, 0.075" pitch, and 1.45" body length. It has an insulation resistance of 1Gohm and operates b/w -20°C to 85°C. Ideal for commercial applications requiring reliable signal transmission on PCBs or panels.
UE75-A20-3000T
Amphenol UE75-A20-3000T is a telecom & datacom connector with 20 contacts, rated current of 0.5A, and durability of 250 cycles. It has a right-angle mounting style, surface mount termination type, and liquid crystal polymer insulator material. Ideal for telecommunications and data communication applications.
ZX62D-B-5P8(30)
The Hirose Electric ZX62D-B-5P8(30) USB connector has gold termination finish, 5 contacts, and rated current of 1.8A. With operating temperatures from -30 to 85°C, it is ideal for telecom & datacom applications requiring a male surface mount USB 2.0 connector with right angle mounting and locking option.
95522-2887
Molex 95522-2887 is a Telecom & Datacom Connector with 0.708" body length, 0.655" width, and 0.64" depth. It features insulation resistance of 500M ohm, matte tin over nickel termination contact finish, and glass-filled liquid crystal polymer insulator material. Ideal for telecom/datacom applications due to UL reference standard compliance, male contact gender, and solder termination type.
RJHSE-3P80
SI-51009-F
Bel Fuse SI-51009-F is a telecom & datacom connector with dielectric voltage of 2100VAC. Featuring 8 contacts, it has a body length of 0.635", width of 0.55", and depth of 1". Ideal for board and panel mounting, this female jack connector uses solder termination and polyethylene insulator material.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
A-2004-2-4-LPS-N-R
Assmann Wsw Components
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Reference Standard: UL; Durability: 500 Cycles;
A-20042-LP/SMT-A
A-20042-LP/SMT-A by Assmann Wsw Components is a Telecom & Datacom Connector with 8 contacts, rated at 1.5A signal current. It features a dielectric voltage of 1000VAC, insulation resistance of 1Gohm, and operates b/w -40 to 85°C. Ideal for commercial applications requiring durable connectors with surface mount termination.
A-20042-LP/SMT-B
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; Contact Material: NOT SPECIFIED; JESD-609 Code: e3; Mating Contact Finish: NOT SPECIFIED;
A-20042-LP/SMT-C
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Durability: 750 Cycles; Body or Shell Style: JACK;
A-20042-LP/SMT-REEL
Telecom and Datacom Connectors; Termination Contact Finish: TIN OVER NICKEL;
A-20042-LPS
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Insulation Resistance: 1000000000 ohm; Maximum Operating Temperature (Cel): 85;
A-2004-1-LP/SMT
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Mating Contact Finish: AU; Body or Shell Style: RECEPTACLE; Mounting Option-1: LOCKING;
A-2004-1-1-N-R
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Maximum Operating Temperature (Cel): 85; Plating Thickness (inch): 15u;
A-2004-1-4-LP-R
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Body Width: .461 inch; Termination Type: SOLDER;
A-2004-1-1-LP-N
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Termination Type: SOLDER; Insulation Resistance: 1000000000 ohm;
A-2004-1-2-LP-N
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Termination Type: SOLDER; Reference Standard: UL;
A-2004-1-3-LP-N
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Body or Shell Style: JACK; Board Mounting Option: SPLIT BOARD LOCK;
A-2004-1-1
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Reference Standard: UL; Insulation Resistance: 1000000000 ohm;
A-2004-1-2
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Body or Shell Style: JACK; Plating Thickness (inch): 30u;
A-2004-1-3
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Body Length: .618 inch; Body Depth: .81 inch;
A-2004-1-2-LP-N-R
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Board Mounting Option: SPLIT BOARD LOCK; Contact Material: PHOSPHOR BRONZE;
A-2004-1-4-LP-N-R
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1414VAC; Mounting Style: RIGHT ANGLE;
A-2004-1-4-N-R
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Mounting Type: BOARD; Reference Standard: UL;
A-2004-1-4-R
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Durability: 500 Cycles; Terminal Length: .15 inch;
A-20041
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Body Width: .63 inch; Maximum Operating Temperature (Cel): 125; Board Mounting Option: LOCATING POSTS;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved