Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
J00-0065NL by Pulse Electronics is a telecom & datacom connector with body dimensions of 0.64" x 0.545" x 0.85". It features matte tin termination, polyethylene insulator, and brass shell material. Ideal for board and panel mounting applications, it has 8 contacts, UL 94V-0 flammability rating, and operates b/w 0°C to 70°C.
Median Price
$4.189
Lifecycle Status
Suppliers In-Stock
36
In-Stock Inventory
1k+
Avnet
1+ parts
$4.168
100+ parts
$3.379
1k+ parts
-
10k+ parts
Chip1Stop
$4.210
$3.380
$3.180
Sager
$4.650
$4.220
$3.920
DigiKey
$6.770
$4.892
$4.158
$3.898
Mouser Electronics
$4.600
$4.380
Newark
$7.520
$5.610
$5.480
Element14
$7.914
$5.681
$4.668
Farnell
$8.675
$6.751
$6.248
Arrow
$3.355
Verical
TTI
$3.880
$3.740
$3.690
TTI Europe
$4.120
$3.522
Master Electronics
$3.820
$3.650
$3.570
Future Electronics
$3.780
Mobius Materials
$3.630
$2.910
Nova Conductors
$4.042
DF Sales Co.
$5.390
Right Parts Inc.
Vyrian
Bristol Electronics
Electro Sonic
$3.990
$3.810
$3.750
ComSIT Distribution GmbH
Prism Electronics
Inventory MP
IBS Electronics
$5.555
$4.853
Chip Stock
LWI Electronics Inc
NAC Semi
$7.920
$7.200
Rutronik
$3.840
Q Components
Halfin
First Choice Components Inc.
Sensible Micro Corp
PC Components Company LLC
Semtec, LLC
Semicontronic
$3.500
$3.412
$3.395
Argo Parts USA
$3.937
Netroflash
$3.759
Corohmni
$4.175
Continental Prestige Electronics
$6.580
$4.310
Advanced Electronics
$6.911
$6.289
$5.667
Aztec Data Supply Inc.
$8.840
Perfect Parts
S.R.D Solutions
GreenTree Electronics
Speed Components Ltd (Excess)
Compact size allows for space-saving installation in tight spaces.
Provides improved signal quality and reduces electromagnetic interference.
Offers good insulation properties and durability for long-term use.
Ensures reliable and low resistance connections for optimal performance.
Sufficient number of contacts for versatile connectivity options.
Allows for flexible mounting options to suit various installation requirements.
Provides excellent durability and resistance to corrosion for long-lasting usage.
Secure connection that can withstand environmental factors and movement without disconnection.
Easy and firm insertion for quick and reliable connectivity.
Telecom & Datacom Connectors J00-0065NL attributes and parameters. Explore more Telecom & Datacom Connectors devices from Pulse Electronics
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
J00-0065NL Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
LM358M
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Protek Devices
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
Pulse Electronics
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
Weitronic Enterprise
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
Sensitron Semiconductor
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
RJHSE-5381-06
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR;
74960-3018
Molex
Molex 74960-3018 is a Telecom & Datacom Connector with 18 contacts, Tin finish, and Polyethylene insulator. Ideal for surface mount board applications in telecom and datacom systems due to its female contact gender and right angle mounting style.
5569380-1
TE Connectivity
TE Connectivity 5569380-1 is a Telecom & Datacom Connector with EMI shielding. It has Insulation Resistance of 500MΩ, rated for 1.5A signal current, and operates b/w -40 to 85°C. Ideal for telecom and datacom applications requiring durable connectors with right-angle mounting options.
USB4120-03-C
Global Connector Technology
USB4120-03-C by Global Connector Technology is a USB connector with 16 contacts, rated at 0.25A signal current. It features a dielectric voltage of 100VAC and insulation resistance of 100MΩ. Ideal for telecom & datacom applications, it has a durable design with liquid crystal polymer insulator material.
JXD0-2015NL
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
SS-52400-003
Bel Fuse
Bel Fuse SS-52400-003 is a Telecom & Datacom Connector with 24 contacts, rated at 5A signal current. It features a dielectric voltage of 100VAC, insulation resistance of 100MΩ, and operates b/w -40°C to 105°C. Ideal for board mounting applications in telecommunications and data communication systems.
51387-0578
The Molex 51387-0578 USB connector features a body length of 0.303", insulation resistance of 100M ohm, and dielectric voltage rating of 100VAC. Ideal for telecom/datacom applications, this connector has a GLASS FILLED POLYETHYLENE insulator, solder holding posts for board mounting, and operates b/w 0 to 50°C.
6-641337-3
Commscope
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Insulation Resistance: 500000000 ohm; Durability: 750 Cycles;
HDRA-E68W2LFDT1EC-SL+
Honda Tsushin Kogyo
HDRA-E68W2LFDT1EC-SL+ by Honda Tsushin Kogyo is a 68-contact telecom/datacom connector with nickel shell finish and PPS insulator material. It features female contacts, right-angle mounting style, and solder termination. Ideal for board and panel mounting in applications requiring high UL flammability rating of 94V-0.
SCRU-02
Samtec
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: PANEL; IEC Conformity: NO; Contact Material: PHOSPHOR BRONZE;
85502-5008
Molex 85502-5008 is a Telecom & Datacom Connector with GLASS FILLED LIQUID CRYSTAL POLYMER insulator. It has 8 contacts, operates b/w -40 to 85°C, and meets UL standards. Ideal for surface mount applications in telecom and datacom systems due to its right angle mounting style and solder holding posts.
J3011G21DNLT
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
12401548E4#2A
Amphenol
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
DX07S024WJ1R350
Japan Aviation Electronics Industry
DX07S024WJ1R350 by Japan Aviation Electronics: USB connector with 24 contacts, gold over nickel termination, nickel shell finish. Ideal for telecom & datacom applications requiring surface mount female connectors on boards.
UE75-A20-3000T
Amphenol UE75-A20-3000T is a telecom & datacom connector with 20 contacts, rated current of 0.5A, and durability of 250 cycles. It has a right-angle mounting style, surface mount termination type, and liquid crystal polymer insulator material. Ideal for telecommunications and data communication applications.
2331
Switchcraft
Switchcraft 2331 is a plastic telecom & datacom connector with 2 female contacts. It features panel mounting and solder termination, suitable for jack applications in telecommunications and data communication.
2294415-1
TE Connectivity 2294415-1 is a Telecom & Datacom Connector with EMI shielding. It features Liquid Crystal Polymer insulator, 8 contacts, and 1.5A signal current rating. Ideal for board mounting applications in telecom and datacom systems.
HDRA-E68W2LFDT1EC-SL
HDRA-E68W2LFDT1EC-SL by Honda Tsushin Kogyo is a 68-contact telecom/datacom connector with 0.031" pitch, 1.681" body length, and 1000000000 ohm insulation resistance. It features a POLYPHENYLENE SULFIDE insulator, 250VAC dielectric voltage, and 0.3A signal current rating. Ideal for commercial applications requiring reliable board or panel mounting in right-angle configuration.
RJHSE-5E80
09455511102
Harting Electronics & Kg
09455511102 by Harting Electronics & Kg is a Telecom & Datacom Connector with dimensions of 0.619" x 2.953" x 0.734". It features TIN OVER NICKEL termination, POLYBUTYLENE TEREPHTHALATE insulator, and COPPER ALLOY shell material. Ideal for board mounting applications in telecom and datacom systems, it has a rated current of 1.5A and operates b/w -40°C to 70°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DM9161AE
Davicom
DP83816AVNG
TI
DP83843BVJE/NOPB
LAN91C111-NU
Microchip
LAN91C111-NU by Microchip Technology is a Serial Communication Controller with 128 terminals, supporting data rates up to 12.5 MBps. It operates b/w 0-70°C and has low power mode, making it ideal for Ethernet communication in various applications requiring high-speed data transfer at a max clock frequency of 25 MHz.
78Q2123
Maxim
DP83848CVV
DP83848CVV by Texas Instruments is an Ethernet transceiver with 48 terminals in a square flatpack package. It operates b/w 0-70°C, with a supply voltage of 3.3V. Ideal for network interfaces, this CMOS technology chip is surface mountable and has a terminal pitch of 0.5mm.
KSZ8893MBL
The Microchip Technology KSZ8893MBL is a LAN switching circuit with 2 transceivers, supporting data rates up to 100 Mbps. Operating at 3.3V, it features a package style of grid array with low profile and fine pitch for compact designs. Ideal for network interfaces in commercial applications with operating temperatures ranging from 0°C to 70°C.
BCM5221
Broadcom Ltd
BCM5241
J00-0045NL
J00-0045NL by Pulse Electronics is a Telecom & Datacom Connector with 8 contacts. Featuring Matte Tin (Sn) finish, it has a 0.64" body length and 0.545" width. Ideal for board and panel mounting in telecom and datacom applications due to its POLYETHYLENE insulator material and right angle mounting style.
J0006D21BNL
J0006D21BNL by Pulse Electronics is a Telecom & Datacom Connector with dimensions of 0.64" x 0.545" x 0.85". It features 8 contacts, POLYETHYLENE insulator, and Tin (Sn) termination. Ideal for board and panel mounting in telecom and datacom applications.
J00026A4001
Telegartner Karl Gartner
J00-0014NL
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Minimum Operating Temperature: 0 Cel; PCB Contact Row Spacing (mm): 2.54;
J0006D21
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Style: TELCOM, MODULAR; Mounting Style: RIGHT ANGLE; Board Mounting Option: PEG;
J00-0025NL
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Ports: 1; Mounting Option-1: LOCKING; Shell Finish: NICKEL;
J00-0042NL
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of PCB Rows: 3; Termination Type: SOLDER; Contact Style: TELCOM, MODULAR;
J00-0062NL
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 1; Polarization Key: POLARIZED HOUSING; MIL Conformity: NO;
J00-0063NL
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Body Width: .545 inch; Terminal Pitch (mm): 2.54;
J00-0064NL
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Polarization Key: POLARIZED HOUSING; MIL Conformity: NO; Terminal Pitch (mm): 2.54;
J0006D01BNL
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Material: BRASS; Terminal Pitch (mm): 2.54; Body Width: .545 inch;
J0006D21NL
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: JACK; Terminal Pitch (mm): 2.54; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved