Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMP08GBC by Analog Devices is a CMOS Sample & Hold IC with 8 functions, 16 terminals, and 5V nominal voltage. It has a max droop rate of 0.02 V/s and is suitable for applications requiring fast acquisition times and precise analog signal sampling in electronic circuits.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Parana Technologies
$3.329
$3.096
IDEA Electronic Components Group
$3.580
$3.401
One Stop Electronics
$5.410
DigiPath Technology Company
$5.585
$5.361
Semicontronic
$6.410
$6.250
$6.218
AZTECH Wire
$11.400
$10.950
$10.730
$10.510
Component Stockers USA
$99.990
Corphita
Microchip USA
Allows for easy and convenient installation on circuit boards, saving space and reducing overall manufacturing costs.
Provides the capability to sample and hold multiple input signals simultaneously, increasing versatility and efficiency.
Maintains a stable output voltage over time, ensuring accurate sampling and holding of input signals.
Compatible with standard power supply voltages, making integration into existing systems seamless.
Offers multiple connection points for input and output signals, enhancing connectivity and functionality.
Provides a compact and rugged design, suitable for various industrial and electronic applications.
Allows for operation within a wide voltage range, accommodating different power supply configurations.
Facilitates easy access to terminals for wiring and connections, simplifying installation and maintenance.
Enables bipolar operation, providing flexibility in signal processing and control.
Supports high input voltage levels without distortion, ensuring accurate sampling of analog signals.
Utilizes CMOS technology for low power consumption and high noise immunity, enhancing overall performance and reliability.
Eliminates the need for external leads, simplifying assembly and reducing the risk of connection errors.
Incorporates a high-performance sample and hold circuit for precise signal processing and control.
Requires low power consumption, making it suitable for portable and battery-operated devices.
Supports dual power supply operation, enabling symmetric signal processing and control.
Allows for the sampling of both positive and negative input signals, expanding the range of applications.
Provides fast sampling and holding of input signals, ideal for time-critical applications.
Includes sample-and-hold functionality for accurate and stable signal acquisition, ensuring reliable performance.
Sample & Hold ICs SMP08GBC attributes and parameters. Explore more Sample & Hold ICs devices from Analog Devices
Amplifier Type:
Technology:
Total Functions:
Sub-Category:
Sampling Mode:
Nominal Acquisition Time:
Nominal Supply Voltage:
Maximum Supply Voltage:
Maximum Negative Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Current:
Minimum Analog Input Voltage:
Maximum Analog Input Voltage:
Maximum Droop Rate:
Total Terminals:
Terminal Position:
Terminal Form:
Surface Mount:
Qualified:
JESD-30 Code:
Package Code:
Package Style (Meter):
SMP08GBC Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Bytesonic Electronics
Db Lectro
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
LM7805CT
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
1N4148WS
Lite-on Semiconductor
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
AD582SH
Analog Devices
AD582SH by Analog Devices is a Sample & Hold IC with 10 terminals, JFET technology, and MILITARY temperature grade. It operates at -55 to 125 °C with +-15 V power supplies and 18 V max analog input voltage. Ideal for applications requiring fast acquisition time like signal processing systems.
MAX5166MCCM+T
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
5962-8754001CX
Analog Devices' 5962-8754001CX is a MIL-STD-883 compliant Sample & Hold IC with a max droop rate of 1 V/s, operating at temperatures from -55 to 125 °C. It features a nominal voltage of 15V and is ideal for military-grade applications requiring fast acquisition times.
SZMP18FSZ
Analog Devices SZMP18FSZ is a Sample & Hold IC with 8 functions, CMOS technology, and 3.5us acquisition time. It operates in industrial temperature range (-40 to 85 °C) and has a max supply current of 9.5mA. Ideal for precision signal processing applications requiring fast sampling and holding capabilities.
HA4-2420-2
Renesas Electronics
SAMPLE AND HOLD CIRCUIT; Temperature Grade: MILITARY; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: QCCN; Package Shape: SQUARE;
AD5533BBC-1
AD5533BBC-1 by Analog Devices is a Sample & Hold IC with 74 terminals, operating at -40 to 85 °C. It has a supply voltage of +-15V and max acquisition time of 16us. Ideal for industrial applications requiring a sample-and-hold circuit in a compact square package.
AD1154AD
AD1154AD by Analog Devices is a Sample & Hold IC with 14 terminals, operating at -25 to 85 °C. It has a max droop rate of 5 V/s and acquisition time of 8 us. Ideal for applications requiring a hybrid technology sample and hold circuit with an input voltage range of +/-10V.
AD684SQ
AD684SQ by Analog Devices is a Sample & Hold IC with 4 functions, BICMOS technology, and 1 us acquisition time. Ideal for military applications due to its MILITARY temperature grade and dual terminal position. Offers +-12 V power supplies and max operating temperature of 125 °C.
TL1591DR
TL1591DR by Texas Instruments is a Sample & Hold IC with a max droop rate of 100 V/s, nominal voltage of 5V, and operating temperature range from -25 to 80°C. This BIFET technology-based amplifier is ideal for sample and hold circuit applications due to its fast acquisition time of 0.031 us and small outline package design.
SMP11AY883C
Analog Devices' SMP11AY883C is a MIL-STD-883 compliant Sample & Hold IC with 14 terminals, 15V nominal voltage, and 4 V/s max droop rate. Ideal for military applications, it features a ceramic package, -55 to 125 °C operating temperature range, and bipolar technology for precise sample-and-hold circuit performance.
AD683SQ
AD683SQ by Analog Devices is a Sample & Hold IC with +-12/+-15V power supplies, 14 terminals, and MILITARY temperature grade. It features a max operating temperature of 125°C and min of -55°C. Ideal for applications requiring a high-performance sample and hold circuit in military-grade environments.
5962-8760801GX
5962-8760801GX by Texas Instruments is a MILITARY-grade Sample & Hold IC with 8 terminals and BIPOLAR technology. It operates b/w -55 to 125 °C, with Vsup ranging from -15V to 15V. Ideal for applications requiring fast acquisition time of 6 us and max analog input voltage of +/-11.5 V.
JL198SGA
The Texas Instruments JL198SGA is a military-grade Sample & Hold IC with 8 terminals and bipolar technology. It operates at temperatures from -55 to 125 °C, with supply voltages of +-5/+-18 V. Ideal for applications requiring fast acquisition times like sample-and-hold circuits.
AD783JN
AD783JN by Analog Devices is a Sample & Hold IC with 8 terminals, BIMOS technology, and 1 V/s droop rate. It operates at -40 to 85°C and has a max acquisition time of 0.25 us. Ideal for precision analog signal processing in commercial applications.
M38510/12501SGX
Analog Devices' M38510/12501SGX is a military-grade Sample & Hold IC with 8 terminals, operating b/w -55 to 125 °C. It has a supply voltage of ±15V, acquisition time of 20µs, and uses bipolar technology. Ideal for applications requiring precise signal sampling in harsh environments.
HA-5351MJ/883
SAMPLE AND HOLD CIRCUIT; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SHC615AP
SHC615AP by Texas Instruments is a Sample & Hold IC with 14 terminals, operating at -40 to 85 °C. It has a supply voltage of +/-5V, max analog input voltage of +/-3V, and uses bipolar technology. Ideal for industrial applications requiring precise sample-and-hold circuitry in compact IN-LINE package style.
LF198AH/NOPB
LF198AH/NOPB by Texas Instruments is a Sample & Hold IC with 15V nominal voltage, 8 terminals, and 25us max acquisition time. It is used in military-grade applications requiring bipolar technology for sample and hold circuits.
AD683AQ
AD683AQ by Analog Devices is a Sample & Hold IC with +-12/+-15V power supplies. It has 14 terminals, operates b/w -40 to 85°C, and consumes 48mA max supply current. Ideal for industrial applications requiring a sample and hold circuit in an IN-LINE package style.
MAX5168LCCM+
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
SMP04ES
Precision Monolithics
SAMPLE AND HOLD CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SMP04ES-REEL
SMP04EP
SAMPLE AND HOLD CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
SMP04ESZ
SMP04ESZ-REEL
SMP04ESZ-REEL by Analog Devices is a Sample & Hold IC with 4 functions, operating at 5V. It features a max droop rate of 0.025 V/s and has an industrial temperature grade. This CMOS technology-based device is ideal for sample and hold circuit applications due to its fast acquisition time of 9 us and compact small outline package design.
SMP08FP
SMP-04Q
SAMPLE AND HOLD CIRCUIT; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; JESD-30 Code: R-GDIP-T16;
SMP-04S
SAMPLE AND HOLD CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; JESD-609 Code: e0;
SMP08BIFP
SMP-04P
SAMPLE AND HOLD CIRCUIT; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Width: 7.62 mm;
SMP04EQ
SMP04EBIS
SMP04EBIP
SMP08BIFQ
SMP04G
SAMPLE AND HOLD CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: DIE; Package Shape: UNSPECIFIED; Technology: CMOS;
SMP04AQ/883
SAMPLE AND HOLD CIRCUIT; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
SMP04EBIQ
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved