Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMP04EPZ by Analog Devices is a Sample & Hold IC with 4 functions, CMOS technology, and 16 terminals. It operates at -40 to 85 °C with a max acquisition time of 11 us. Ideal for industrial applications requiring precise analog signal sampling and holding capabilities in a compact IN-LINE package.
Median Price
$21.682
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$16.600
100+ parts
-
1k+ parts
10k+ parts
Farnell
$21.276
$16.760
$15.217
Element14
$22.087
$17.398
$15.791
Analog Devices Inc
$22.610
$13.438
$11.750
DigiKey
$25.170
$17.619
$16.580
Mouser Electronics
$17.610
$16.890
Newark
$16.960
Rochester
$13.430
$12.020
$11.310
Arrow
$16.060
Verical
Digiode
$15.770
Nova Conductors
$16.248
Vyrian
NAC Semi
Euro-Tech
Parana Technologies
$4.815
$4.478
IDEA Electronic Components Group
$5.177
$4.918
DigiPath Technology Company
$8.076
$7.753
Semicontronic
$14.110
$13.757
$13.687
Corphita
$14.940
Continental Prestige Electronics
$18.660
$14.700
Ampacity Inc.
$30.710
Lixinc
Perfect Parts
Authorized Procurement Solutions
Assy Fe
The plastic/epoxy material used for the package body provides durability and protection for the internal components of the product.
Having 4 functions allows for versatile usage and increased functionality in different applications.
The low maximum droop rate ensures accurate and stable voltage holding capabilities for precise sampling and holding operations.
The nominal supply voltage of 5V ensures compatibility with a wide range of systems and power sources.
With a maximum operating temperature of 85°C, this product can withstand high temperature environments without any performance issues.
The use of CMOS technology ensures low power consumption and high-speed operation, making it an efficient choice for electronic circuits.
Sample & Hold ICs SMP04EPZ attributes and parameters. Explore more Sample & Hold ICs devices from Analog Devices
Amplifier Type:
Technology:
Power Supply Voltage Ratings:
Total Functions:
Sub-Category:
Sampling Mode:
Nominal Acquisition Time:
Maximum Acquisition Time:
Nominal Supply Voltage:
Maximum Supply Voltage:
Maximum Negative Supply Voltage:
Minimum Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Maximum Supply Current:
Minimum Analog Input Voltage:
Maximum Analog Input Voltage:
Maximum Droop Rate:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Package Code:
Package Shape:
Package Style (Meter):
Package Equivalence Code:
SMP04EPZ Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Assembly/Origin - Assembly Site Transfer 29/Mar/2021
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Synsemi
Micro Commercial Components
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
LM358M
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Crimson Semiconductor
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
Infineon Technologies
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
HMC1061LC5TR
Analog Devices' HMC1061LC5TR is a ceramic Sample & Hold IC with 32 terminals, operating at -40 to 85°C. It features a max droop rate of 400000 V/s, nominal voltage of 2V, and max analog input voltage of ±1V. Ideal for industrial applications requiring fast acquisition times and precise sample-and-hold circuitry.
SMP18FQ
SMP18FQ by Analog Devices is a Sample & Hold IC with a max droop rate of 0.04 V/s, operating at temperatures from -40 to 85 °C. It features a CMOS technology, dual terminal position, and is ideal for industrial applications requiring precise sample and hold circuitry.
LF398MX/NOPB
National Semiconductor
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
HA-5351MJ/883
Renesas Electronics
SAMPLE AND HOLD CIRCUIT; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LF398N
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMP04EBIS
Analog Devices' SMP04EBIS is a Sample & Hold IC with 4 functions, CMOS technology, and 5V nominal voltage. It has a max droop rate of 0.025 V/s and operates in industrial temperature range (-40 to 85 °C). Ideal for sample-and-hold circuits in various applications.
SMP08FSZ-REEL
Analog Devices' SMP08FSZ-REEL is a Sample & Hold IC with 8 functions, CMOS technology, and 5V nominal voltage. It has a max droop rate of 0.02 V/s and operates in industrial temperature range (-40 to 85 °C). Ideal for sample-and-hold circuits in various applications requiring precise analog signal acquisition.
HA3-5340-5
Harris Semiconductor
SAMPLE AND HOLD CIRCUIT; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
SHA-4
The Analog Devices SHA-4 is a Sample & Hold IC with 14 terminals, operating at temperatures from 0 to 70 °C. It has a max droop rate of 0.01 V/s and requires a nominal voltage of ±15V. This amplifier type circuit is commonly used in commercial applications for sample-and-hold functions.
SMP-81FY
Analog Devices' SMP-81FY is a ceramic, glass-sealed Sample & Hold IC with 14 terminals. It operates at -25 to 85 °C and has a max droop rate of 4 V/s. Ideal for sample-and-hold circuits, it features a nominal voltage of 15V and max analog input voltage of ±11.5V.
5962-8760802XA
SAMPLE AND HOLD CIRCUIT; Qualification: Not Qualified;
HTC-0300MB
Analog Devices' HTC-0300MB is a Sample & Hold IC with MIL-STD-883 Class B screening. It operates at -55 to 100 °C, with power supplies of ±15V and 5V. Ideal for applications requiring fast 0.2us acquisition time, it features a hybrid technology and through-hole terminals in an in-line package style.
5962-9073001HYX
SAMPLE AND HOLD CIRCUIT; JESD-609 Code: e0; Qualification: Not Qualified; Terminal Finish: Tin/Lead (Sn/Pb);
5962-8760801VZA
The Texas Instruments 5962-8760801VZA is a MILITARY-grade Sample & Hold IC with a supply voltage of ±15V. It features a max acquisition time of 25us, operates in temperatures from -55 to 125°C, and has a small outline package suitable for military applications.
SMP11BY/883C
SMP11BY/883C by Analog Devices is a MILITARY-grade Sample & Hold IC with 14 terminals and +-15V power supplies. It operates b/w -55 to 125 °C, featuring a RECTANGULAR CERAMIC package suitable for SAMPLE AND HOLD CIRCUIT applications.
SMP18FPZ
Analog Devices' SMP18FPZ is a Sample & Hold IC with 8 functions, operating at -40 to 85 °C. It has a max droop rate of 0.04 V/s and supports a supply voltage of 5V. Ideal for industrial applications requiring precise analog signal acquisition in CMOS technology.
SMP10BIFY
Analog Devices' SMP10BIFY is a Sample & Hold IC with 14 terminals, ceramic package, and rectangular shape. It operates at -15V to 15V, with a max droop rate of 0.13 V/s. Ideal for sample-and-hold circuits in commercial applications due to its fast acquisition time of 5 us.
AD585-713M
AD585-713M by Analog Devices is a Sample & Hold IC with 14 terminals, MILITARY grade, and 15V nominal voltage. It has a max acquisition time of 3us and operates b/w -55 to 125 °C. Ideal for applications requiring fast signal sampling in harsh environments.
LF198AH
LF198AH by Texas Instruments is a Sample & Hold IC with 8 terminals, operating at -55 to 125 °C. It has a supply voltage of +-15V, acquisition time of 20us, and can handle analog input voltages up to 11.5V. Ideal for military-grade applications requiring fast sampling and holding capabilities in cylindrical package style.
SHC5320SH
SHC5320SH by Texas Instruments is a Sample & Hold IC with 14 terminals, MILITARY grade, and BIPOLAR technology. It has a max acquisition time of 1.5 us and operates b/w -55 to 125 °C. Ideal for precision signal processing applications requiring fast sampling and holding capabilities.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
SMP04ES
Precision Monolithics
SAMPLE AND HOLD CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SMP04ES-REEL
SMP04EP
SAMPLE AND HOLD CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
SMP04ESZ
SMP04ESZ-REEL
SMP04ESZ-REEL by Analog Devices is a Sample & Hold IC with 4 functions, operating at 5V. It features a max droop rate of 0.025 V/s and has an industrial temperature grade. This CMOS technology-based device is ideal for sample and hold circuit applications due to its fast acquisition time of 9 us and compact small outline package design.
SMP08FP
SMP-04Q
SAMPLE AND HOLD CIRCUIT; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; JESD-30 Code: R-GDIP-T16;
SMP-04S
SAMPLE AND HOLD CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; JESD-609 Code: e0;
SMP08BIFP
SMP-04P
SAMPLE AND HOLD CIRCUIT; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Width: 7.62 mm;
SMP04EQ
SMP04EBIP
SMP08BIFQ
SMP04G
SAMPLE AND HOLD CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: DIE; Package Shape: UNSPECIFIED; Technology: CMOS;
SMP04AQ/883
SAMPLE AND HOLD CIRCUIT; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
SMP04EBIQ
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved