Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' MAX8559EBA2G-T is a BICMOS LDO regulator with 2 outputs. It offers fixed output voltages of 1.8V and 3V, with a max dropout voltage of 0.12V. Suitable for applications requiring precise voltage regulation in compact electronic devices.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
MARBEL Systems
$5.044
Texas Native Microelectronics
$5.798
$5.566
$5.392
$5.102
Kenton Components
$6.958
$6.123
Semicontronic
$8.500
$8.288
$8.245
One Stop Electronics
$9.500
AZTECH Wire
$11.016
Qasali Group International
$15.655
$14.559
$13.776
Corphita
This material provides durability and protection for the internal components of the regulator.
Low dropout voltage ensures efficient power conversion, especially for applications with tight voltage requirements.
Allows for easy and convenient installation on PCBs, saving space and simplifying assembly.
Wide operating temperature range allows for reliable performance in various environmental conditions.
Utilizing BICMOS technology enables high efficiency power conversion and low power consumption.
Stable and accurate output voltage for powering sensitive electronic components.
Provides a reliable low output voltage for powering specific components in the circuit.
Tight voltage tolerance ensures consistent and reliable performance of the regulator.
Sufficient number of terminals for easy connection and integration into the circuit.
Fixed output voltage eliminates the need for adjustment, simplifying design and operation.
Multiple output options ensure flexibility in powering various components in the circuit.
Fixed Regulators - Positive Multiple Output LDO MAX8559EBA2G-T attributes and parameters. Explore more Fixed Regulators - Positive Multiple Output LDO devices from Analog Devices
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Dropout Voltage-2:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Current-2:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Maximum Output Voltage-2:
Minimum Output Voltage-2:
Nominal Output Voltage-2:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
Width:
MAX8559EBA2G-T Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
LM358DR2G
Onsemi
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
CR0805-FX-10R0ELF
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Synsemi
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
Laube Technology
TPS51103DRCR
Texas Instruments
TPS51103DRCR by Texas Instruments is a fixed positive multiple output LDO regulator with 3 outputs. It has a max input voltage of 28V, operating temperature up to 150°C, and a package style of small outline. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LP2966IMM-2518
LP2966IMM-2518 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2.5V and 1.8V outputs, suitable for applications requiring low dropout voltages of 0.27V. This CMOS technology regulator has a small outline package with Gull Wing terminals, making it ideal for compact designs in various electronic devices. Operating temperature range from -40°C to 125°C ensures reliable performance in diverse environments.
MAX8882EUTAQ+T
Analog Devices
Analog Devices' MAX8882EUTAQ+T is a BICMOS technology-based LDO regulator with 2 outputs. It offers fixed output voltages of 3.3V and 2.5V, with a max dropout voltage of 0.144V. Ideal for applications requiring stable power supply in compact electronic devices due to its small outline package style and dual terminal position.
TPS73HD318PWPG4
TPS73HD318PWPG4 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Nominal Output Voltage-1 of 1.8 V and Max Output Current-1 of 0.75 A, making it suitable for applications requiring stable power supply with low dropout voltage in compact designs. Operating efficiently within -40 to 125 °C temperature range, this regulator is ideal for various electronic devices.
LP2966IMMX-1833/NOPB
LP2966IMMX-1833/NOPB by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Max Dropout Voltage of 0.27 V, operating temperature range from -40 to 125 °C, and package style of Small Outline Thin Profile. Ideal for applications requiring stable voltage regulation in compact spaces.
CAT6221-SFTD-GT3
CAT6221-SFTD-GT3 by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Nominal Output Voltage-1 of 3.3V and Max Dropout Voltage of 0.35V, suitable for applications requiring stable voltage regulation in compact spaces. Operating temperature ranges from -40 to 125 °C make it versatile for various electronic devices.
NCP590MNOATAG
NCP590MNOATAG by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Max Dropout Voltage of 0.225 V, Operating Temperature range from -40 to 125 °C, and Max Load Regulation of 0.086%. Ideal for applications requiring precise voltage regulation in compact spaces.
LP2966MX2518EP
LP2966MX2518EP by Texas Instruments is a fixed positive multiple output LDO regulator with 2.7V min input voltage and 7V max input voltage. It offers two outputs with 1.8V and 2.5V nominal voltages, each supporting up to 0.15A output current. This regulator is ideal for applications requiring precise voltage regulation in compact electronic devices.
MC33765DTB
MC33765DTB by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 5 outputs. It offers a Max Dropout Voltage of 0.17 V, operating temperature range from -40 to 125 °C, and a package style of Small Outline Thin Profile. Ideal for applications requiring stable voltage regulation in compact electronic devices.
MAX8559ETA2G-T
Analog Devices' MAX8559ETA2G-T is a BICMOS LDO regulator with 2 outputs. It offers a dropout voltage of 0.12 V, operating temperature up to 150 °C, and max output current of 0.3 A per channel. Ideal for applications requiring stable power supply in compact spaces.
TLV7113333DSER
TLV7113333DSER by Texas Instruments is a fixed positive multiple output LDO regulator with 2 outputs. It has a max dropout voltage of 0.2 V and can operate in temperatures ranging from -40 to 125°C. This small outline, very thin profile package is ideal for applications requiring precise voltage regulation in compact spaces.
ADP320ACPZ-110-R7
ADP320ACPZ-110-R7 by Analog Devices is a fixed positive multiple output LDO regulator with 3.3V nominal output voltage and 0.2A max output current per channel. It operates in a temperature range from -40°C to 125°C, making it suitable for various applications requiring stable power supply with low dropout voltage. The package style includes chip carrier, heat sink/slug, and very thin profile for compact designs.
TPS71918-12DRVTG4
TPS71918-12DRVTG4 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a max dropout voltage of 0.4 V, operating temperature range from -40 to 125°C, and can handle up to 0.2 A output current. Ideal for applications requiring stable power supplies in compact spaces.
TPS780270200DDCR
TPS780270200DDCR by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2.7V nominal output voltage, 0.15A max output current, and 1.2V min output voltage. It is ideal for applications requiring low dropout voltage and precise regulation in compact designs.
TPS73HD318PWPRG4
TPS73HD318PWPRG4 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Nominal Output Voltage-1 of 1.8V and Max Output Current-1 of 0.75A, suitable for applications requiring stable voltage regulation in compact spaces. Operating temperature ranges from -40°C to 125°C make it versatile for various environments.
MAX8559EBAII
Analog Devices' MAX8559EBAII is a BICMOS technology-based LDO regulator with 2 outputs. It has a max dropout voltage of 0.12 V, operating temperature up to 150 °C, and a package style of GRID ARRAY for applications requiring fixed positive multiple output regulation in compact spaces.
TLV7113333DSET
TLV7113333DSET by Texas Instruments is a fixed positive multiple output LDO regulator with 2 outputs. It has a max dropout voltage of 0.2 V and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable power supply in compact electronic devices.
TLV7111812DSET
TLV7111812DSET by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 1.8V and 1.2V nominal output voltages, suitable for applications requiring low dropout voltage and dual outputs. It operates in temperatures ranging from -40°C to 125°C, has a max load regulation of 0.015%, and comes in a small outline package style with surface mount capability.
TPS70251PWP
TPS70251PWP by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Max Dropout Voltage of 0.275 V and can handle up to 0.5 A of Max Output Current-1. Ideal for applications requiring stable voltage regulation in compact spaces, such as portable electronic devices.
LP5996SDX-3333
LP5996SDX-3333 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 3.3V nominal output voltage and 0.55V max dropout voltage. It has two outputs, can handle up to 0.15A and 0.3A current, suitable for various applications requiring stable power supply in compact designs at temperatures ranging from -40°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
MAX8530EBTJJ+
Maxim Integrated
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VFBGA; Terminal Form: BALL; Maximum Voltage Tolerance: 3 %; Peak Reflow Temperature (C): 260;
MAX8530ETTO2
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 7 V; Maximum Voltage Tolerance: 3 %;
MAX8530ETTO2-T
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 7 V; Maximum Voltage Tolerance: 3 %;
MAX8530EBTJO+
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VFBGA; Terminal Form: BALL; Maximum Voltage Tolerance: 3 %; No. of Functions: 1;
MAX8530EBTKG+
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VFBGA; Terminal Form: BALL; Maximum Voltage Tolerance: 3 %; Terminal Position: BOTTOM;
MAX8530ETTP2
MAX8530ETTO2+
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Voltage Tolerance: 3 %; Maximum Output Voltage-2: 1.854 V;
MAX8531EBTGG+T
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VFBGA; Terminal Form: BALL; Maximum Input Voltage Absolute: 7 V; Maximum Voltage Tolerance: 3 %;
MAX8530ETTKO+T
MAX8530ETTKO+
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Voltage Tolerance: 3 %; Terminal Pitch: .95 mm;
MAX8530ETTKO
MAX8530ETTP2-T
MAX8531EBTGG
MAX8530ETTO2+T
MAX8531EBTGG+
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VFBGA; Terminal Form: BALL; Maximum Voltage Tolerance: 3 %; Operating Temperature (TJ-Max): 150 Cel;
MAX8531ETTGG+
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Voltage Tolerance: 3 %; Maximum Output Voltage-1: 3.09 V;
MAX8531EBTGG-T
MAX8530ETTKO-T
MAX8530EBTKG+T
MAX8530EBTJO+T
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved