Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' MAX3221ECAE+T is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It features a max output low current of 1.6A and supports interface standards EIA-232, TIA-232, V.24, V.28 for applications requiring reliable data transmission in commercial temperature environments up to 70°C.
Median Price
$6.110
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Newark
1+ parts
$0.764
100+ parts
1k+ parts
10k+ parts
-
Analog Devices Inc
$3.944
$3.553
$3.477
DigiKey
$6.930
$4.504
$4.067
$3.982
Mouser Electronics
$7.130
$4.590
$4.300
$4.090
Element14
$486.380
$357.730
$304.610
$234.890
Farnell
$3.420
$2.910
$2.350
Rochester
$3.670
$3.280
$3.090
Digiode
$0.726
EXC GmbH
$0.861
Nova Conductors
$2.850
Chip Stock
Vyrian
Cyclops Electronics Ltd
R&J Components
Sensible Micro Corp
Schukat
$1.358
$1.304
Anansix
Component Sense
Semi Source
Classic Components Corporation
ComSIT Distribution GmbH
LIBRA Elektronik GmbH
Velocity Electronics
Partservice
$1.802
$1.770
Ampacity Inc.
$0.650
Semicontronic
$0.634
$0.630
Corphita
$0.688
Argo Parts USA
Vigor
$3.780
Corohmni
$6.608
Advanced Electronics
$7.868
$7.160
$6.452
MARBEL Systems
$12.638
Texas Native Microelectronics
$14.526
$13.945
$13.509
$12.783
Kenton Components
$17.431
$15.339
Qasali Group International
$39.220
Perfect Parts
Lixinc
QUARKTWIN TECHNOLOGY LTD
GreenTree Electronics
RC Electronics
Continental Prestige Electronics
$2.990
$2.240
A-Z Elektronik GmbH
S.R.D Solutions
Authorized Procurement Solutions
Glotronic Ltd.
Speed Components Ltd (Excess)
Metaverse IC Inc.
Bastille Electronics
Kepictronics
Futuretech Components
The use of plastic/epoxy material provides durability and resistance to environmental factors, making this product a reliable choice for various applications.
The surface mount capability allows for easy and efficient installation on circuit boards, saving space and simplifying the manufacturing process.
With a high maximum supply voltage, this product can handle a wide range of power inputs, increasing flexibility in design and compatibility with different systems.
The rectangular shape of the package ensures efficient use of space on the PCB, optimizing layout and reducing overall footprint.
The dual power supply options of 3.3V and 5V provide versatility in voltage requirements, suitable for a variety of applications and systems.
The 16 terminals offer flexibility in connections and compatibility with various interfaces, enhancing the functionality and usability of the product.
The small outline and shrink pitch design of the package save space on the PCB, making it ideal for compact electronic devices and applications.
The low minimum supply voltage requirement allows for operation in systems with limited power availability, increasing the product's versatility and adaptability.
With a high maximum operating temperature of 70°C, this product can withstand high heat environments, ensuring stable performance in challenging conditions.
The ability to operate at low temperatures down to 0°C makes this product suitable for use in a wide range of environments, from industrial to commercial settings.
Line Drivers & Receivers MAX3221ECAE+T attributes and parameters. Explore more Line Drivers & Receivers devices from Analog Devices
Differential Output:
Driver No. of Bits:
Input Characteristics:
Interface IC Type:
Interface Standard:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Minimum Out Swing:
Maximum Output Low Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Receive Delay:
Receiver No. of Bits:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
MAX3221ECAE+T Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
Continental Device India
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
STM32F407VGT6
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Baneasa S A
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
THVD2450DR
Texas Instruments
THVD2450DR by Texas Instruments is a line driver/receiver with 8 terminals, operating at -40 to 125°C. It supports EIA-422-B, TIA-422-B, EIA-485-A, and TIA-485-A standards with differential output and Schmitt trigger input. Ideal for automotive applications due to its compact size (4.905mm x 3.895mm) and low supply voltage requirements (3V to 5.5V).
DS2480B+T&R
Maxim Integrated
LINE DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MAX3483ESA+T
Analog Devices
MAX3483ESA+T by Analog Devices is a CMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential outputs. With a small outline package style, it's ideal for industrial applications requiring reliable communication over long distances.
MAX3160EAP+
Analog Devices' MAX3160EAP+ is a Line Driver & Receiver with 20 terminals, operating at 3-5.5V. It features EIA-485, EIA-422, and EIA-232 interface standards for industrial applications. The device offers differential outputs, BICMOS technology, and a max transmit delay of 800ns.
XISO1410DWR
LINE TRANSCEIVER;
MAX3232EUE+T
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
SN65HVD1780D
SN65HVD1780D by Texas Instruments is an EIA-485-A/TIA-485-A line transceiver with 3.15V to 5.5V supply voltage range, differential output, and 2000ns max transmit delay. Ideal for industrial applications requiring reliable communication over long distances using differential Schmitt trigger inputs.
SN65HVD3086EDGSR
SN65HVD3086EDGSR by Texas Instruments is a line driver & receiver with a max supply voltage of 5.5V and a max transmit delay of 20ns. It is commonly used in industrial applications that require differential output and interface standards such as EIA-485-A, TIA-485-A, and EIA-422.
MAX3232CDWR
MAX3232CDWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V power supplies. It features a max transmit delay of 300ns and interface standards EIA-232-F; TIA-232-F; V.28, suitable for commercial temperature grade applications requiring reliable data transmission over short distances.
MAX3072EESA
MAX3072EESA by Maxim Integrated is a Line Driver & Receiver with 3.3V supply, 1A output current, and BICMOS technology. It supports EIA-422, EIA-485, TIA-485 interfaces for industrial applications requiring differential Schmitt trigger inputs and dual terminal position in a small outline package.
MAX232ACPE
MAX232ACPE by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 3500ns and output polarity is inverted. Widely used in EIA-232-E, TIA-232-E interfaces for data transmission applications.
MAX3490EESA
MAX3490EESA by Maxim Integrated is a line driver/receiver with 3.3V supply, 35ns transmit delay, and EIA-422/EIA-485 interface standards. Ideal for industrial applications requiring differential output and Schmitt trigger input characteristics in a compact small outline package.
ISO3088DWR
ISO3088DWR by Texas Instruments is a line driver/receiver with 16 terminals, operating at -40 to 85°C. It features a max transmit delay of 45ns, differential output, and interface standards EIA-422/485. Ideal for industrial applications requiring reliable data transmission in harsh environments.
SN75176BD
SN75176BD by Texas Instruments is a Line Driver & Receiver with 8 terminals, operating at 5V. It features a max supply voltage of 5.25V, transmit delay of 22ns, and operates in commercial temperature range. Ideal for EIA-422-B, TIA-422-B, EIA-485-A interfaces in various applications requiring bipolar technology and differential output.
THVD2410DGKR
THVD2410DGKR by Texas Instruments is a line transceiver with differential output and Schmitt trigger input. It operates in automotive temperature grade range (-40 to 125 °C) with max supply voltage of 5.5 V. Ideal for EIA-422-B, TIA-422-B, EIA-485-A, and TIA-485-A interface standards applications due to its fast transmit delay (350 ns) and low receive delay (80 ns).
LTC2862ACS8-2#PBF
Linear Technology
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MAX3232ESE+T
Analog Devices' MAX3232ESE+T is a Line Driver & Receiver with 3.3/5V power supplies, operating from -40 to 85°C. It features INVERTED output polarity, TOTEM-POLE output characteristics, and SCHMITT TRIGGER input characteristics. Ideal for EIA-232 and EIA-562 interface standards in industrial applications.
MAX485ECSA+T
MAX485ECSA+T by Analog Devices is a CMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates at 5V, has a max supply current of 0.9mA, and offers differential outputs. With a small outline package style, it's ideal for applications requiring fast transmit delay of 60ns and low output current of 4A.
ISL3172EIBZ-T
Renesas Electronics
ISL3172EIBZ-T by Renesas Electronics is a Line Driver & Receiver with 8 terminals, operating at -40 to 85°C. It features a differential output and supports EIA-422/EIA-485 interface standards. Ideal for industrial applications requiring BICMOS technology and a supply voltage range of 3V to 3.6V.
ISO1176DWR
ISO1176DWR by Texas Instruments is a line driver with 16 terminals, operating at -40 to 85 °C. It has a max supply voltage of 5.5 V and differential output capability. Ideal for industrial applications requiring EIA-485/TIA-485 interface standard compliance with a compact small outline package style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
MAX3232CDR
The Texas Instruments MAX3232CDR is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features inverted output polarity, Schmitt trigger input characteristics, and EIA-232-F interface standard. Ideal for applications requiring fast data transmission with low power consumption in commercial temperature range.
MAX3232EIPWRQ1
MAX3232EIPWRQ1 by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and supports EIA-232-F, TIA-232-F, V.28 interfaces. Ideal for industrial applications requiring inverted output polarity and Schmitt trigger input characteristics.
MAX3232IPWR
MAX3232IPWR by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and features inverted output polarity. Ideal for industrial applications requiring EIA-232-F, TIA-232-F, V.28 interface standard compliance with a small outline package style.
MAX3232EIDR
MAX3232EIDR by Texas Instruments is a line driver and receiver with a max supply voltage of 3.6V. It has 2 functions and is used in applications requiring EIA-232-F, TIA-232-F, or V.28 interface standards.
MAX3232EIPWR
MAX3232EIPWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It has inverted output polarity, Schmitt trigger input characteristics, and supports EIA-232-F interface standard. Ideal for industrial applications requiring reliable data transmission over short distances.
MAX3232ESE
MAX3232ESE by Maxim Integrated is a Line Driver & Receiver with 3.3/5V power supplies, operating temperature of -40 to 85 °C. It has EIA-232 and EIA-562 interface standards, Schmitt trigger input characteristics, and inverted output polarity. Ideal for industrial applications requiring reliable communication over long distances.
MAX3232ESE+
MAX3232ESE+ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features Totem-Pole output, Inverted polarity, and Schmitt Trigger input for EIA-232/TIA-232 interface standard. Ideal for industrial applications requiring reliable communication over long distances.
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MAX3232IDR
The Texas Instruments MAX3232IDR is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features a max transmit delay of 300ns and can handle up to 1.6A output low current. Ideal for industrial applications requiring EIA-232-F, TIA-232-F, V.28 interface standards in compact designs.
MAX3232CPWR
MAX3232CPWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features inverted output polarity, Schmitt trigger input characteristics, and EIA-232-F interface standard. Ideal for applications requiring reliable communication in commercial temperature range.
MAX3232IDRG4
MAX3232IDRG4 by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and offers inverted output polarity. Ideal for industrial applications requiring EIA-232-F, TIA-232-F, V.28 interface standard compliance with a temperature range of -40 to 85°C.
MAX3232EUE+
MAX3232EUE+ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It features EIA-232/TIA-232 interface standard, CMOS technology, and Schmitt trigger input characteristics. Ideal for industrial applications requiring reliable data transmission in harsh environments.
MAX3232EUE
MAX3232EUE by Maxim Integrated is a Line Driver & Receiver with 3.3/5V power supplies, operating from -40 to 85°C. It features EIA-232 and EIA-562 interface standards, SCHMITT TRIGGER input characteristics, and GULL WING terminal form. Ideal for industrial applications requiring reliable communication over long distances.
MAX3232CPWRG4
MAX3232CPWRG4 by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and offers inverted output polarity. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces in commercial temperature grade applications.
MAX3232IDBR
MAX3232IDBR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at -40 to 85 °C. It has a max supply voltage of 3.6 V and peak reflow temperature of 260 C. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces in industrial applications due to its inverted output polarity and Schmitt trigger input characteristics.
MAX3221EIPWR
MAX3221EIPWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It has a max supply voltage of 3.6V and can handle industrial temperatures from -40 to 85°C. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces due to its Schmitt trigger input characteristics and inverted output polarity.
MAX3485ESA+
MAX3485ESA+ by Analog Devices is a CMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential outputs. With a max transmit delay of 35ns, it's ideal for industrial applications requiring high-speed data transmission in harsh environments.
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MAX3485ESA
MAX3485ESA by Maxim Integrated is a CMOS Line Transceiver with 3.3V supply, 35ns max transmit delay, and EIA-422/EIA-485 interface. Ideal for industrial applications requiring differential output and Schmitt trigger input characteristics in a compact small outline package.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved