Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTC6992CS6-3#TRPBF by Analog Devices is a VCO with a supply voltage range of 2.25V to 5.5V and a max operating frequency of 1MHz. It is commonly used in applications requiring voltage controlled oscillators, such as communication systems and frequency synthesizers.
Median Price
$3.477
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Nova Conductors
$2.955
Digiode
$6.213
Vyrian
Anansix
Corohmni
$0.227
Vigor
$2.210
Continental Prestige Electronics
$2.896
Argo Parts USA
Netroflash
Semicontronic
$5.380
$5.246
$5.219
One Stop Electronics
Ampacity Inc.
Corphita
$5.886
Parana Technologies
$11.489
$10.685
MARBEL Systems
$11.498
IDEA Electronic Components Group
$12.354
$11.736
Texas Native Microelectronics
$13.216
$12.687
$12.291
$11.630
Kenton Components
$15.859
$13.956
Advanced Electronics
$18.260
$17.347
Microchip USA
$19.208
DigiPath Technology Company
$19.272
$18.501
Aztec Data Supply Inc.
$22.240
Qasali Group International
$35.683
$33.185
$31.401
PLASTIC/EPOXY material is lightweight and durable, making the product suitable for various applications.
With a maximum supply voltage of 5.5 V, this VCO can handle higher voltage inputs, providing flexibility in system design.
Low supply current of 0.45 mA helps in conserving power and reducing energy consumption.
Being a voltage-controlled oscillator, this product allows precise frequency control, making it ideal for applications that require frequency modulation.
Having 6 terminals provides connectivity options and allows for easy integration into circuit designs.
Compact size of 2.9mm x 1.75mm x 1.0mm saves space on PCBs and enables the product to be used in space-constrained applications.
Low minimum supply voltage of 2.25 V allows for operation in battery-powered devices or other low voltage systems.
With a maximum operating temperature of 70 °C, this VCO can withstand high-temperature environments, increasing its reliability.
Low minimum control voltage of 0.1 V enables precise frequency adjustments, making the VCO suitable for frequency modulation applications.
Operating at a minimum temperature of 0 °C ensures functionality in cold environments, expanding the range of applications for this VCO.
Matte Tin terminal finish ensures good solderability and reliable electrical connections for improved performance.
Maximum control voltage of 0.9 V allows for a wide range of frequency tuning, offering versatility in frequency modulation applications.
Low minimum operating frequency of 0.00000318 MHz allows for precise frequency generation, suitable for high-frequency applications.
Surface mounting feature simplifies the assembly process and allows for easy mounting on PCBs, saving time and effort.
With a maximum operating frequency of 1 MHz, this VCO can generate high-frequency signals, making it suitable for various RF and communication applications.
VCO Voltage Controlled Oscillators LTC6992CS6-3#TRPBF attributes and parameters. Explore more VCO Voltage Controlled Oscillators devices from Analog Devices
Maximum Control Voltage:
Minimum Control Voltage:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Package Body Material:
Package Equivalence Code:
Physical Dimension:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Terminal Finish:
LTC6992CS6-3#TRPBF Oscillators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Diodes Incorporated
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
LM317AEMP/NOPB
Texas Instruments
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
Kingwell Technonlogy
Vishay Telefunken
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
Surge Components
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
MBR0530T1G
Onsemi
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MAOC-009261-TR0500
TE Connectivity's MAOC-009261-TR0500 VCO offers 10 dBm output power, -88 dBc/Hz phase noise, and operates b/w 7100 MHz to 7900 MHz. Ideal for applications requiring a voltage-controlled oscillator with a compact size of 5.0mm x 5.0mm x 0.9mm and surface mounting feature.
LTC6992MPS6-2#TRMPBF
Analog Devices
LTC6992MPS6-2#TRMPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a supply voltage range of 2.25V to 5.5V and consumes 0.45mA max current. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
LTC6990CDCB#TRMPBF
LTC6990CDCB#TRMPBF by Analog Devices is a VCO with 6 terminals, operating from 0-70°C. It has a supply voltage range of 2.25-5.5V and operates b/w 0.000488-2MHz frequencies. Ideal for applications requiring digital tuned oscillators in compact designs.
ROS-1435PV
Mini-circuits
Mini-circuits ROS-1435PV VCO is a 16-terminal, 12.7mm x 12.7mm x 4.57mm metal package with modulation sensitivity of 30 MHz/V and output power of 3 dBm at a nominal frequency of 1435 MHz. It operates b/w -55 to +85 °C with a supply voltage of 5V, making it ideal for applications requiring precise voltage-controlled oscillation in the GHz range.
LTC6992IS6-4#TRMPBF
LTC6992IS6-4#TRMPBF by Analog Devices is a VCO with 6 terminals, operating freq. range of 0.00000318MHz to 1MHz. It has a supply voltage range of 2.25V to 5.5V and control voltage range of 0.1V to 0.9V, suitable for applications requiring precise frequency control in compact designs like communication systems and test equipment.
LTC6992IS6-2#TRMPBF
LTC6992IS6-2#TRMPBF by Analog Devices is a VCO with 6 terminals, operating from -40°C to 85°C. It has a supply voltage range of 2.25V to 5.5V and control voltage range of 0.1V to 0.9V, making it suitable for applications requiring precise frequency control in compact designs.
HMC510LP5
HMC510LP5 by Analog Devices is a VCO with 5.25V max supply voltage, 360mA max supply current, and 10dBm output power. Ideal for applications requiring precise frequency control in the range of 8450MHz to 9550MHz. With -116 dBc/Hz phase noise, it offers high performance in compact dimensions of 5.1mm x 5.1mm x 1.0mm for surface mount installations.
POS-300+
Mini-circuits POS-300+ VCO features 13 MHz/V modulation sensitivity, -78 dBc/Hz phase noise, and 10 dBm output power. Ideal for applications requiring a voltage-controlled oscillator with a frequency range of 150-280 MHz and operating temperature from -55 to 85°C.
HMC358MS8G
HMC358MS8G by Analog Devices is a VCO with 3V supply, 100mA current, and 8dBm output power. Ideal for applications requiring a voltage-controlled oscillator with an operating frequency range of 5800-6800MHz. Its compact size (3.1mm x 3.1mm x 1.1mm) and surface mount feature make it suitable for various electronic systems.
ROS-2150VW+
Mini-circuits ROS-2150VW+ VCO features 2150 MHz nominal frequency, -70 dBc/Hz phase noise, and 4 dBm output power. Ideal for applications requiring precise voltage-controlled oscillation in a compact 12.7mm x 12.7mm x 4.57mm package with modulation sensitivity of 70 MHz/V.
LTC6992IS6-2#WTRPBF
LTC6992IS6-2#WTRPBF by Analog Devices is a VCO with 6 terminals, operating from -40 to 85°C. It has a control voltage range of 0.1V to 0.9V and operates b/w 0.00000318 MHz to 1 MHz, making it suitable for various frequency-controlled applications in automotive and industrial settings.
LTC6992MPS6-2#TRPBF
LTC6992MPS6-2#TRPBF by Analog Devices is a VCO with 6 terminals, operating from -55 to 125°C. It has a supply voltage range of 2.25V to 5.5V and operates b/w 0.00000318MHz to 1MHz frequencies. Ideal for applications requiring precise voltage-controlled oscillation in compact designs using surface mount technology.
MAOC-009264-TR0500
TE Connectivity's MAOC-009264-TR0500 VCO offers 10.5 dBm output power, -90 dBc/Hz phase noise, and operates at 8800-9800 MHz frequencies. Ideal for applications requiring precise voltage-controlled oscillation in compact designs with a supply voltage of 5V.
HMC507LP5TR
Analog Devices' HMC507LP5TR is a VCO with 5.25V max supply voltage, 270mA max supply current, and 11dBm output power. Ideal for applications requiring precise frequency control in the range of 6650-7650MHz, such as wireless communication systems or radar equipment.
LTC6990HDCB#PBF
Linear Technology
DIGITAL TUNED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; JESD-609 Code: e3; Maximum Operating Temperature: 125 Cel; Terminal Finish: Matte Tin (Sn) - annealed;
SN54LS326W-00
Voltage Controlled Oscillators;
LTC6992CS6-1#TRPBF
LTC6992CS6-1#TRPBF by Analog Devices is a VCO with max supply voltage of 5.5V, operating freq range from 0.00000318 MHz to 1 MHz. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
LTC6992HS6-4#WTRPBF
LTC6992HS6-4#WTRPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a supply voltage range of 2.25V to 5.5V and operates in temperatures from -40 °C to 125°C. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
ADF5582BCPZ-U3
ADF5582BCPZ-U3 by Analog Devices is a VCO with 32 terminals, operating at frequencies from 11400 MHz to 12800 MHz. It uses bipolar technology and requires power supplies of 3/5V. This voltage-controlled oscillator is ideal for applications requiring precise frequency control in temperature ranges from -40°C to 85°C.
SN74LS624NSRE4
SN74LS624NSRE4 by Texas Instruments is a VCO with 14 terminals, operating b/w -55°C to 125°C. It has a supply voltage range of 4.5V to 5.5V and operates at frequencies from 0.000001 MHz to 20 MHz. Ideal for applications requiring precise voltage-controlled oscillation in various temperature conditions.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
LTC6992CS6-1#TRMPBF
LTC6992CS6-1#TRMPBF by Analog Devices is a VCO with 6 terminals, operating from 0 to 70°C. It has a voltage range of 0.1V to 0.9V and frequency range of 0.00000318 MHz to 1 MHz. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
LTC6992IS6-1#TRMPBF
LTC6992IS6-1#TRMPBF by Analog Devices is a VCO with 6 terminals, operating from -40 to 85°C. It has a supply voltage range of 2.25V to 5.5V and operates b/w 0.00000318 MHz to 1 MHz. Ideal for applications requiring a compact surface-mount VCO with precise control over frequency modulation.
LTC6992HS6-1#TRMPBF
LTC6992HS6-1#TRMPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a supply voltage range of 2.25V to 5.5V and consumes 0.45mA max current. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
LTC6992CS6-2#TRMPBF
LTC6992CS6-2#TRMPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a supply voltage range of 2.25V to 5.5V and control voltage range of 0.1V to 0.9V, making it suitable for applications requiring precise frequency control in compact designs.
LTC6992IS6-1#TRPBF
LTC6992IS6-1#TRPBF by Analog Devices is a VCO with 6 terminals, operating from -40°C to 85°C. It has a control voltage range of 0.1V to 0.9V and operates b/w 0.00000318 MHz to 1 MHz, making it suitable for applications requiring precise frequency control in compact designs.
LTC6992CDCB-1#TRMPBF
LTC6992CDCB-1#TRMPBF by Analog Devices is a VCO with a max supply voltage of 5.5V and max supply current of 0.45mA. It is used as a voltage controlled oscillator in various applications such as communication systems and frequency synthesis.
LTC6992IDCB-1#TRMPBF
Analog Devices' LTC6992IDCB-1#TRMPBF is a VCO with 6 terminals, operating from 2.25V to 5.5V, offering a frequency range of 0.00000318MHz to 1MHz. Ideal for applications requiring voltage-controlled oscillators in compact surface-mount packages.
LTC6992CDCB-3#TRMPBF
LTC6992CDCB-3#TRMPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a supply voltage range of 2.25V to 5.5V and consumes 0.45mA max current. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
LTC6992CS6-4#TRMPBF
LTC6992CS6-4#TRMPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a voltage control range of 0.1V to 0.9V and operates b/w -40°C to 70°C. This surface mount oscillator is ideal for applications requiring precise frequency control in compact designs.
LTC6992CDCB-2#TRMPBF
LTC6992CDCB-2#TRMPBF by Analog Devices is a VCO with 6 terminals, operating freq. range of 0.00000318MHz to 1MHz. It has a supply voltage range of 2.25V to 5.5V and control voltage range of 0.1V to 0.9V, making it suitable for applications requiring precise frequency control in compact designs like communication systems and test equipment.
LTC6992HS6-1#TRPBF
LTC6992HS6-1#TRPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a supply voltage range of 2.25V to 5.5V and consumes only 0.45mA max current, suitable for applications requiring precise voltage-controlled oscillation in compact designs.
LTC6992IS6-3#TRMPBF
LTC6992IS6-3#TRMPBF by Analog Devices is a VCO with max supply voltage of 5.5V, operating freq range from 0.00000318 MHz to 1 MHz. It's used in applications requiring voltage-controlled oscillators in compact surface mount packages.
LTC6992HS6-1#WTRMPBF
LTC6992HS6-1#WTRMPBF by Analog Devices is a VCO with 6 terminals, operating from -40 to 125°C. It has a supply voltage range of 2.25V to 5.5V and operates b/w 0.00000318 MHz to 1 MHz. Ideal for applications requiring a compact, low-power voltage-controlled oscillator in automotive or industrial settings.
LTC6990IS6#TRMPBF
DIGITAL TUNED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Supply Voltage: 5.5 V;
LTC6990IS6#TRMPBF by Analog Devices is a VCO with max supply voltage of 5.5V, current of 0.283mA, and operating freq range from 0.000488 MHz to 2 MHz. Ideal for applications requiring digital tuned oscillators in compact designs with surface mounting feature.
LTC6992HS6-2#TRMPBF
LTC6992HS6-2#TRMPBF by Analog Devices is a VCO with a supply voltage range of 2.25V to 5.5V and a max operating frequency of 1MHz. It is commonly used in applications requiring voltage controlled oscillators, such as communication systems and frequency synthesizers.
LTC6990CS6#TRMPBF
DIGITAL TUNED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Maximum Operating Frequency: 2 MHz; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Supply Voltage: 5.5 V;
DIGITAL TUNED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Minimum Supply Voltage: 2.25 V; Additional Features: TAPE AND REEL; Maximum Operating Temperature: 70 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved