Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTC6990MPS6#TRMPBF by Analog Devices is a VCO with max supply voltage of 5.5V and current of 0.283mA. It operates b/w -55°C to 125°C, with frequency range from 0.000488MHz to 2MHz. Ideal for applications requiring digital tuned oscillators in compact designs.
Median Price
$13.965
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
$10.674
100+ parts
$7.008
1k+ parts
$6.853
10k+ parts
-
Mouser Electronics
$13.920
$9.940
$9.120
Newark
$14.010
$10.010
$9.080
Analog Devices Inc
$14.090
$7.383
$6.660
DigiKey
$14.550
$9.887
$9.047
Element14
$23.490
$12.320
$11.840
Verical
$6.480
Farnell
$5.580
$5.350
Nova Conductors
$8.682
Digiode
$10.184
Chip Stock
Vyrian
Anansix
Corohmni
$0.052
Parana Technologies
$0.453
$0.421
IDEA Electronic Components Group
$0.487
$0.463
DigiPath Technology Company
$0.760
$0.729
Aztec Data Supply Inc.
$0.910
MARBEL Systems
$2.739
Texas Native Microelectronics
$3.148
$3.022
$2.928
$2.770
Kenton Components
$3.778
$3.324
Ampacity Inc.
$5.070
Semicontronic
$5.510
$5.372
$5.345
Qasali Group International
$8.500
$7.905
$7.480
Netroflash
Advanced Electronics
$8.856
Corphita
$9.648
Vigor
$10.640
Microchip USA
$24.918
iodParts Technologies Inc.
Argo Parts USA
RC Electronics
Continental Prestige Electronics
$8.960
$6.770
High maximum supply voltage allows for flexibility in power source options, making this VCO suitable for a variety of applications.
Low supply current consumption helps conserve energy and prolong the lifespan of the device, making it cost-effective in the long run.
Digital tuning provides precise frequency control, making this VCO ideal for applications that require high accuracy.
Having 6 terminals allows for easy integration and connectivity in circuits, simplifying the design process and reducing assembly time.
Compact size ensures space-saving installation and makes this VCO suitable for compact electronic devices.
Low minimum supply voltage requirement enables operation in battery-powered devices, extending the range of applications.
High maximum operating temperature tolerance ensures reliability in harsh environments, increasing the overall durability of the product.
Wide temperature range allows for operation in extreme conditions, making this VCO versatile and reliable in various applications.
Matte tin finish provides excellent conductivity and durability, enhancing the performance and longevity of the VCO.
Low minimum operating frequency capability enables this VCO to cover a wide range of frequencies, making it versatile for different applications.
Surface mount capability simplifies the installation process and allows for efficient and compact placement on PCBs, saving space and reducing assembly costs.
High maximum operating frequency range offers flexibility and versatility in frequency modulation applications, making this VCO suitable for various signal processing tasks.
VCO Voltage Controlled Oscillators LTC6990MPS6#TRMPBF attributes and parameters. Explore more VCO Voltage Controlled Oscillators devices from Analog Devices
Additional Features:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Physical Dimension:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Terminal Finish:
LTC6990MPS6#TRMPBF Oscillators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
SPC TECHNOLOGY/ MULTICOMP
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
HMC732LC4BTR
Analog Devices
Analog Devices' HMC732LC4BTR is a VCO with modulation sensitivity of -85 MHz/V, output power of 1 dBm, and phase noise at -65 dBc/Hz. Ideal for applications requiring voltage-controlled oscillators in the frequency range of 6-12 GHz.
HMC8364LP6GE
Analog Devices' HMC8364LP6GE is a VCO with 267 MHz/V modulation sensitivity, -66 dBc/Hz phase noise, and 4 dBm output power. Ideal for applications requiring precise frequency control in the range of 18.1 GHz to 26.6 GHz, such as radar systems and communication equipment.
UMJ-950-D14-G
Universal Microwave
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; Minimum Operating Frequency: 75 MHz; Maximum Control Voltage: 12 V; Output Power: 9 dBm; Physical Dimension: 12.7mm x 12.7mm x 5.59mm;
HTO-7500
Broadcom
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Maximum Operating Frequency: 11000 MHz; Minimum Operating Frequency: 7500 MHz; Package Equivalence Code: CAN4,.2;
HMC533LP4E
Hittite Microwave
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Maximum Supply Voltage: 5.25 V; Maximum Control Voltage: 13 V; Output Power: 9 dBm;
ROS-1435PV
Mini-circuits
Mini-circuits ROS-1435PV VCO is a 16-terminal, 12.7mm x 12.7mm x 4.57mm metal package with modulation sensitivity of 30 MHz/V and output power of 3 dBm at a nominal frequency of 1435 MHz. It operates b/w -55 to +85 °C with a supply voltage of 5V, making it ideal for applications requiring precise voltage-controlled oscillation in the GHz range.
MAOC-009262-TR0500
M/a-com Technology Solutions
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Physical Dimension: 5.0mm x 5.0mm x 0.9mm; Nominal Supply Voltage: 5 V; Maximum Operating Temperature: 85 Cel;
HMC533LP4TR
Analog Devices' HMC533LP4TR is a VCO with 5.25V max supply voltage, 260mA max supply current, and 9dBm output power. Ideal for applications requiring precise frequency control in the range of 23.8GHz to 24.8GHz, such as radar systems or communication equipment.
MAX2751EUA-T
Maxim Integrated
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; Maximum Control Voltage: 2.4 V; Output Power: -3 dBm; Minimum Control Voltage: .4 V; Modulation Sensitivity: 175 MHz/V;
LNO-550
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Minimum Operating Temperature: -54 Cel; Maximum Operating Frequency: 775 MHz; Modulation Sensitivity: 45 MHz/V;
MAOC-009265-TR0500
TE Connectivity
TE Connectivity's MAOC-009265-TR0500 VCO offers 6 dBm output power, -85 dBc/Hz phase noise, and operates b/w 9400 MHz to 10800 MHz. Ideal for applications requiring a compact 5.0mm x 5.0mm x 0.9mm form factor with a voltage-controlled oscillator design and surface mounting feature.
ROS-2500+
ROS-2500+ by Mini-circuits is a VCO with modulation sensitivity of 180 MHz/V, output power of 6.5 dBm, and phase noise of -66 dBc/Hz. Ideal for applications requiring precise frequency control in the range of 1600-2500 MHz, such as wireless communication systems or radar equipment.
MTO-8240R
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Output Power: 10 dBm; Maximum Control Voltage: 50 V; Maximum Operating Temperature: 85 Cel;
MAOC-009266-TR0500
TE Connectivity's MAOC-009266-TR0500 VCO offers 6 dBm output power, -82 dBc/Hz phase noise, and operates b/w 10200 MHz to 11300 MHz. Ideal for applications requiring a compact 5.0mm x 5.0mm x 0.9mm form factor with a voltage-controlled oscillator design.
TLC2940IPW
TLC2940IPW by Texas Instruments is a VCO with max supply voltage of 3.15V, operating freq of 28-50MHz, and CMOS technology. Ideal for applications requiring voltage-controlled oscillators in compact designs due to its small size (4.7mm x 3.3mm x 1.2mm) and surface mounting feature.
LTC6992HDCB-4#TRPBF
LTC6992HDCB-4#TRPBF by Analog Devices is a VCO with 6 terminals, operating from -40°C to 125°C. It has a supply voltage range of 2.25V to 5.5V and operates b/w frequencies of 0.00000318 MHz to 1 MHz. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
HTO-7500R
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Minimum Control Voltage: .5 V; Phase Noise: -60 dBc/Hz; Maximum Supply Current: 100 mA;
LTC6990CDCB#PBF
LTC6990CDCB#PBF by Analog Devices is a VCO with max supply voltage of 5.5V and current of 0.283mA. It operates b/w 0-70°C, has min freq of 0.000488MHz, and max freq of 2MHz. Ideal for applications requiring digital tuned oscillators in compact designs.
HMC1164LP5E
Analog Devices' HMC1164LP5E is a VCO with 300 MHz/V modulation sensitivity, -86 dBc/Hz phase noise, and 8 dBm output power. Ideal for applications requiring precise frequency control in the range of 10.38-11.3 GHz, such as radar systems and communication equipment.
HMC535LP4TR
Analog Devices' HMC535LP4TR is a VCO with 590 MHz/V modulation sensitivity, -110 dBc/Hz phase noise, and 6 dBm output power. Ideal for applications requiring precise frequency control in the 14.7-15.4 GHz range, this VCO operates on a 5V supply voltage and features a compact 4.1mm x 4.1mm x 1.0mm package suitable for surface mount installations.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
LTC6992CS6-1#TRMPBF
LTC6992CS6-1#TRMPBF by Analog Devices is a VCO with 6 terminals, operating from 0 to 70°C. It has a voltage range of 0.1V to 0.9V and frequency range of 0.00000318 MHz to 1 MHz. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
LTC6992IS6-1#TRMPBF
LTC6992IS6-1#TRMPBF by Analog Devices is a VCO with 6 terminals, operating from -40 to 85°C. It has a supply voltage range of 2.25V to 5.5V and operates b/w 0.00000318 MHz to 1 MHz. Ideal for applications requiring a compact surface-mount VCO with precise control over frequency modulation.
LTC6992HS6-1#TRMPBF
LTC6992HS6-1#TRMPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a supply voltage range of 2.25V to 5.5V and consumes 0.45mA max current. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
LTC6992CS6-1#TRPBF
LTC6992CS6-1#TRPBF by Analog Devices is a VCO with max supply voltage of 5.5V, operating freq range from 0.00000318 MHz to 1 MHz. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
LTC6992CS6-2#TRMPBF
LTC6992CS6-2#TRMPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a supply voltage range of 2.25V to 5.5V and control voltage range of 0.1V to 0.9V, making it suitable for applications requiring precise frequency control in compact designs.
LTC6992IS6-1#TRPBF
LTC6992IS6-1#TRPBF by Analog Devices is a VCO with 6 terminals, operating from -40°C to 85°C. It has a control voltage range of 0.1V to 0.9V and operates b/w 0.00000318 MHz to 1 MHz, making it suitable for applications requiring precise frequency control in compact designs.
LTC6992IS6-2#TRMPBF
LTC6992IS6-2#TRMPBF by Analog Devices is a VCO with 6 terminals, operating from -40°C to 85°C. It has a supply voltage range of 2.25V to 5.5V and control voltage range of 0.1V to 0.9V, making it suitable for applications requiring precise frequency control in compact designs.
LTC6992CDCB-1#TRMPBF
LTC6992CDCB-1#TRMPBF by Analog Devices is a VCO with a max supply voltage of 5.5V and max supply current of 0.45mA. It is used as a voltage controlled oscillator in various applications such as communication systems and frequency synthesis.
LTC6992IDCB-1#TRMPBF
Analog Devices' LTC6992IDCB-1#TRMPBF is a VCO with 6 terminals, operating from 2.25V to 5.5V, offering a frequency range of 0.00000318MHz to 1MHz. Ideal for applications requiring voltage-controlled oscillators in compact surface-mount packages.
LTC6992CDCB-3#TRMPBF
LTC6992CDCB-3#TRMPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a supply voltage range of 2.25V to 5.5V and consumes 0.45mA max current. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
LTC6992CS6-4#TRMPBF
LTC6992CS6-4#TRMPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a voltage control range of 0.1V to 0.9V and operates b/w -40°C to 70°C. This surface mount oscillator is ideal for applications requiring precise frequency control in compact designs.
LTC6992CDCB-2#TRMPBF
LTC6992CDCB-2#TRMPBF by Analog Devices is a VCO with 6 terminals, operating freq. range of 0.00000318MHz to 1MHz. It has a supply voltage range of 2.25V to 5.5V and control voltage range of 0.1V to 0.9V, making it suitable for applications requiring precise frequency control in compact designs like communication systems and test equipment.
LTC6992HS6-1#TRPBF
LTC6992HS6-1#TRPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a supply voltage range of 2.25V to 5.5V and consumes only 0.45mA max current, suitable for applications requiring precise voltage-controlled oscillation in compact designs.
LTC6992IS6-3#TRMPBF
LTC6992IS6-3#TRMPBF by Analog Devices is a VCO with max supply voltage of 5.5V, operating freq range from 0.00000318 MHz to 1 MHz. It's used in applications requiring voltage-controlled oscillators in compact surface mount packages.
LTC6992HS6-1#WTRMPBF
LTC6992HS6-1#WTRMPBF by Analog Devices is a VCO with 6 terminals, operating from -40 to 125°C. It has a supply voltage range of 2.25V to 5.5V and operates b/w 0.00000318 MHz to 1 MHz. Ideal for applications requiring a compact, low-power voltage-controlled oscillator in automotive or industrial settings.
LTC6990IS6#TRMPBF
Linear Technology
DIGITAL TUNED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Supply Voltage: 5.5 V;
LTC6990IS6#TRMPBF by Analog Devices is a VCO with max supply voltage of 5.5V, current of 0.283mA, and operating freq range from 0.000488 MHz to 2 MHz. Ideal for applications requiring digital tuned oscillators in compact designs with surface mounting feature.
LTC6992HS6-2#TRMPBF
LTC6992HS6-2#TRMPBF by Analog Devices is a VCO with a supply voltage range of 2.25V to 5.5V and a max operating frequency of 1MHz. It is commonly used in applications requiring voltage controlled oscillators, such as communication systems and frequency synthesizers.
LTC6990CS6#TRMPBF
DIGITAL TUNED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Maximum Operating Frequency: 2 MHz; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Supply Voltage: 5.5 V;
DIGITAL TUNED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Minimum Supply Voltage: 2.25 V; Additional Features: TAPE AND REEL; Maximum Operating Temperature: 70 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved