Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Physical Dimension: 12.7mm x 4.572mm; Phase Noise: -114 dBc/Hz; Output Power: 10 dBm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Decca Corp
$7.000
$6.860
$6.791
Supply Digital
Corphita
VCO Voltage Controlled Oscillators MTO-8040R attributes and parameters. Explore more VCO Voltage Controlled Oscillators devices from Broadcom
Maximum Control Voltage:
Minimum Control Voltage:
Mounting Feature:
No. of Terminals:
Offset Frequency:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Power:
Phase Noise:
Physical Dimension:
Power Variation:
Maximum Supply Current:
Nominal Supply Voltage:
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
Good-ark Electronics
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
FDLL4148
Fairchild Semiconductor
Formosa Microsemi
Allegro MicroSystems
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Transys Electronics
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
HMC531LP5E
Hittite Microwave
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Operating Temperature: -40 Cel; Offset Frequency: 100 kHz; Maximum Operating Temperature: 85 Cel;
SN74LS626N
Texas Instruments
SN74LS626N by Texas Instruments is a VCO with 16 terminals, operating at frequencies from 0.000001 MHz to 20 MHz. It has a supply voltage range of 4.5V to 5.5V and operates in temperatures from -55°C to 125°C. Ideal for applications requiring precise voltage-controlled oscillation within specified frequency ranges.
LTC6992IS6-4#WTRMPBF
Analog Devices
LTC6992IS6-4#WTRMPBF by Analog Devices is a VCO with 6 terminals, operating freq. range of 0.00000318MHz to 1MHz. It has a supply voltage range of 2.25V to 5.5V and temp. range of -40 °C to 85°C, making it suitable for applications requiring precise voltage-controlled oscillation in compact designs.
LTC6992HDCB-3#TRMPBF
LTC6992HDCB-3#TRMPBF by Analog Devices is a VCO with 6 terminals, operating from -40 to 125°C. It has a supply voltage range of 2.25V to 5.5V and operates b/w 0.00000318 MHz to 1 MHz. Ideal for applications requiring precise voltage-controlled oscillation in compact surface-mount designs.
LTC6992HDCB-3#TRPBF
LTC6992HDCB-3#TRPBF by Analog Devices is a VCO with max supply voltage of 5.5V, operating freq range from 0.00000318 MHz to 1 MHz. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
LTC6992IS6-3#WTRMPBF
LTC6992IS6-3#WTRMPBF by Analog Devices is a VCO with 6 terminals, operating from -40 to 85 °C. It has a supply voltage range of 2.25V to 5.5V and operates b/w 0.00000318 MHz to 1 MHz. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
MTO-8060R
Broadcom
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 8; Phase Noise: -110 dBc/Hz; Maximum Operating Temperature: 85 Cel; Power Variation: 2.5 dB;
HMC431LP4ETR
Analog Devices' HMC431LP4ETR is a VCO with -102 dBc/Hz phase noise, 5500-6100 MHz operating frequency range, and 3.25V max supply voltage. Ideal for applications requiring precise frequency control in compact designs like RF transceivers and wireless communication systems.
HMC532LP4RTR
Analog Devices' HMC532LP4RTR is a VCO with 3.25V max supply voltage, 100mA max supply current, and 14dBm output power. Ideal for applications requiring precise frequency control in the range of 7100-7900MHz, such as wireless communication systems. Compact at 4.1mm x 4.1mm x 1.0mm and operates b/w -40 to +85°C temperature range.
MAOC-009264-TR0500
TE Connectivity's MAOC-009264-TR0500 VCO offers 10.5 dBm output power, -90 dBc/Hz phase noise, and operates at 8800-9800 MHz frequencies. Ideal for applications requiring precise voltage-controlled oscillation in compact designs with a supply voltage of 5V.
LTC6992CS6-3#TRPBF
LTC6992CS6-3#TRPBF by Analog Devices is a VCO with a supply voltage range of 2.25V to 5.5V and a max operating frequency of 1MHz. It is commonly used in applications requiring voltage controlled oscillators, such as communication systems and frequency synthesizers.
HMC632LP5TR
HMC632LP5TR by Analog Devices is a VCO with 32 terminals, operating at frequencies b/w 14.25-15.65 GHz. It has a phase noise of -107 dBc/Hz, output power of 4 dBm, and operates on a supply voltage range of 4.75-5.25V. Ideal for applications requiring precise frequency control in communication systems or radar equipment.
ADF5510BCPZ-U3
ADF5510BCPZ-U3 by Analog Devices is a VCO with 32 terminals, operating at frequencies from 8450 MHz to 9650 MHz. It uses bipolar technology and requires power supplies of 3V to 5V. This voltage-controlled oscillator is ideal for applications requiring precise frequency control in temperature ranges from -40°C to 85°C.
HMC1165LP5ETR
Analog Devices' HMC1165LP5ETR is a VCO with 32 terminals, operating b/w -40 °C to 85°C. It offers modulation sensitivity of 310 MHz/V, output power of 8 dBm, and phase noise at -88 dBc/Hz. Ideal for applications requiring precise frequency control in the range of 11.07 GHz to 11.62 GHz.
POS-400+
Mini-circuits
POS-400+ by Mini-circuits is a VCO with modulation sensitivity of 16.9 MHz/V, output power of 9.5 dBm, and phase noise of -76 dBc/Hz. Ideal for applications requiring precise frequency control in the range of 200-380 MHz, such as communication systems and radar equipment.
SN54LS626FK
SN54LS626FK by Texas Instruments is a VCO with 16 terminals, operating at frequencies from 1 MHz to 20 MHz. It has a supply voltage range of 4.5V to 5.5V and consumes up to 55mA. Ideal for applications requiring precise voltage-controlled oscillation in environments ranging from -55°C to 125°C.
MTO-8020R
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 8; Maximum Control Voltage: 20 V; Nominal Supply Voltage: 15 V; Maximum Operating Frequency: 400 MHz;
MAX2750AUA+T
MAX2750AUA+T by Analog Devices is a VCO with 5.5V max supply voltage, 140 MHz/V modulation sensitivity, and -125 dBc/Hz phase noise. Ideal for applications requiring precise frequency control in the range of 2370-2470 MHz, such as wireless communication systems.
LTC6992IS6-1#TRMPBF
LTC6992IS6-1#TRMPBF by Analog Devices is a VCO with 6 terminals, operating from -40 to 85°C. It has a supply voltage range of 2.25V to 5.5V and operates b/w 0.00000318 MHz to 1 MHz. Ideal for applications requiring a compact surface-mount VCO with precise control over frequency modulation.
ROS-1435PV
Mini-circuits ROS-1435PV VCO is a 16-terminal, 12.7mm x 12.7mm x 4.57mm metal package with modulation sensitivity of 30 MHz/V and output power of 3 dBm at a nominal frequency of 1435 MHz. It operates b/w -55 to +85 °C with a supply voltage of 5V, making it ideal for applications requiring precise voltage-controlled oscillation in the GHz range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MTO-8360
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Maximum Supply Current: 50 mA; Output Power: 10 dBm; Maximum Operating Temperature: 85 Cel;
MTO-8060
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 8; Minimum Operating Frequency: 600 MHz; Nominal Supply Voltage: 15 V; Maximum Operating Frequency: 900 MHz;
MTO-8010
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Power Variation: 2.5 dB; Maximum Operating Frequency: 200 MHz; Physical Dimension: 12.7mm x 5.08mm;
MTO-8240
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Offset Frequency: 50 kHz; Minimum Operating Temperature: -54 Cel; Maximum Control Voltage: 50 V;
MTO-8090
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Offset Frequency: 50 kHz; Maximum Supply Current: 50 mA; Output Power: 10 dBm;
MTO-8040
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 8; Offset Frequency: 50 kHz; Nominal Supply Voltage: 15 V; Maximum Operating Frequency: 600 MHz;
MTO-8360R
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Maximum Operating Frequency: 4300 MHz; Minimum Operating Temperature: -54 Cel; Maximum Operating Temperature: 85 Cel;
MTO-8002R
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 8; Offset Frequency: 10 kHz; Maximum Operating Frequency: 50 MHz; Physical Dimension: 12.7mm x 5.08mm;
MTO-8010R
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Nominal Supply Voltage: 15 V; Minimum Control Voltage: 1 V; Physical Dimension: 12.7mm x 5.08mm;
MTO-8155R
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Power Variation: 2.5 dB; Phase Noise: -103 dBc/Hz; Maximum Supply Current: 50 mA;
MTO-8090R
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 8; Maximum Operating Temperature: 85 Cel; Maximum Supply Current: 50 mA; Maximum Control Voltage: 50 V;
MTO-8240R
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Output Power: 10 dBm; Maximum Control Voltage: 50 V; Maximum Operating Temperature: 85 Cel;
MTO-8005R
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 8; Nominal Supply Voltage: 15 V; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel;
MTO-8002
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Phase Noise: -109 dBc/Hz; Physical Dimension: 12.7mm x 5.08mm; Nominal Supply Voltage: 15 V;
MTO-8005
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 8; Minimum Operating Temperature: -55 Cel; Minimum Control Voltage: 1 V; Offset Frequency: 10 kHz;
MTO-8020
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 8; Minimum Control Voltage: 1 V; Nominal Supply Voltage: 15 V; Maximum Operating Temperature: 100 Cel;
MTO-8155
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Maximum Operating Temperature: 85 Cel; Maximum Control Voltage: 20 V; Offset Frequency: 50 kHz;
MTO-8040R
Hewlett Packard
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Physical Dimension: 12.7mm x 4.572mm; Maximum Supply Current: 50 mA; Minimum Operating Temperature: -54 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved