Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTC6915CGN#PBF by Analog Devices is an instrumentation amplifier with 10uV max input offset voltage, 0.01uA max average bias current, and 0.003uA max input offset current. Ideal for applications requiring precise signal amplification in commercial temperature environments.
Median Price
$8.680
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Farnell
1+ parts
$8.270
100+ parts
$5.290
1k+ parts
$4.950
10k+ parts
-
DigiKey
$8.550
$5.630
$5.104
Mouser Electronics
$8.810
$5.790
$5.250
Analog Devices Inc
$9.110
$4.503
$3.710
Element14
$11.080
$8.280
$6.280
Verical
$3.690
Nova Conductors
$4.410
Digiode
$5.862
Chip Stock
Vyrian
Anansix
Parana Technologies
$1.585
$1.474
IDEA Electronic Components Group
$1.704
$1.619
DigiPath Technology Company
$2.658
$2.552
Ampacity Inc.
$3.140
Semicontronic
$3.062
$3.046
Advanced Electronics
$3.659
$3.330
$3.000
Corohmni
$3.915
MARBEL Systems
$4.246
Aranea Global
$4.322
$4.149
Aztec Data Supply Inc.
$4.327
Continental Prestige Electronics
Argo Parts USA
Texas Native Microelectronics
$4.880
$4.685
$4.538
$4.294
Corphita
$5.553
Kenton Components
$5.856
$5.153
Vigor
$6.520
Qasali Group International
$13.176
$12.254
$11.595
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Perfect Parts
iodParts Technologies Inc.
Plastic/epoxy material provides durability and protection for the internal components of the instrumentation amplifier, making it suitable for various environmental conditions.
Low input offset voltage ensures accurate signal processing and minimal distortion, making this instrumentation amplifier ideal for precision applications.
Low average bias current helps in reducing power consumption and ensures stable operation over long periods, making it a reliable choice for continuous use.
Surface mount capability allows for easy integration onto circuit boards, saving space and enabling high-density applications.
Nominal supply voltage of 3V makes it compatible with a wide range of power sources and simplifies the design process.
Having 16 terminals enables versatile connectivity options and facilitates complex circuit configurations.
Low input offset current ensures minimal errors in signal amplification, enhancing the overall accuracy and performance of the amplifier.
Compact package style with a shrink pitch design saves space and allows for efficient placement on circuit boards.
Low non-linearity results in accurate signal amplification with minimal distortion, making it suitable for precision measurement applications.
High supply voltage limit provides versatility and allows for compatibility with a wide range of power sources, enhancing the flexibility of the amplifier.
Wide operating temperature range of up to 70°C ensures reliable performance in various environmental conditions, making it suitable for industrial applications.
Low minimum operating temperature ensures the amplifier can function in cold environments without loss of performance, increasing its versatility.
Matte tin terminal finish provides good solderability and corrosion resistance, ensuring the longevity and reliability of the connections.
Dual terminal position allows for easy connection to external components and provides flexibility in circuit design.
Low seated height enables the amplifier to be used in compact spaces and slim electronic devices, enhancing its applicability in various designs.
Compact width of the amplifier allows for space-saving integration onto circuit boards and facilitates high-density design layouts.
Wide nominal bandwidth of 0.2 MHz enables the amplifier to process signals with high frequencies, making it suitable for fast data acquisition applications.
The maximum time at peak reflow temperature of 30 seconds ensures the amplifier can withstand the reflow soldering process without damage, simplifying manufacturing and assembly.
High peak reflow temperature of 260°C allows for reliable soldering and ensures the durability of the connections during assembly.
Compact length of the amplifier facilitates space-saving integration onto circuit boards and enables sleek electronic device designs.
Commercial temperature grade ensures the amplifier meets industry standards for reliable operation in typical commercial environments.
Low maximum negative supply voltage limit provides protection against reverse polarity and ensures the safety of the amplifier and connected components.
High common mode reject ratio of 85 dB reduces noise and interference in signal processing, resulting in accurate and reliable amplification of signals.
Gull wing terminal form provides mechanical strength and reliable connections, ensuring the longevity and stability of the amplifier in various applications.
Specifically designed as an instrumentation amplifier, it offers high precision, accuracy, and stability in amplifying small differential voltages, making it ideal for measurement and sensor applications.
Nominal negative supply voltage of 0V simplifies the power supply requirements and ensures compatibility with single-ended power sources.
Low nominal slow rate of 0.2 V per microsecond ensures smooth signal amplification and stable operation over time, making it suitable for dynamic signal processing.
Narrow terminal pitch of 0.635 mm allows for easy connection to external components and precise placement on circuit boards, enhancing the overall flexibility and efficiency of the amplifier.
Instrumentation Amplifiers LTC6915CGN#PBF attributes and parameters. Explore more Instrumentation Amplifiers devices from Analog Devices
Amplifier Type:
Total Functions:
Sub-Category:
Nominal Bandwidth (3dB):
Nominal Slew Rate:
Minimum Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Peak Bias Current:
Maximum Non Linearity:
Maximum Input Offset Current (IIO):
Nominal Supply Voltage:
Maximum Supply Voltage:
Nominal Negative Supply Voltage (Vsup):
Maximum Negative Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Reflow Peak Time Limit:
Peak Reflow Temperature:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Moisture Sensitivity Level (MSL):
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Package Code:
Package Shape:
Package Style:
LTC6915CGN#PBF Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Design/Specification - Mult Dev 11/Oct/2022
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
1N4148W-T
Rectron
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
Sangdest Microelectronics (Nanjing)
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
2N2222A
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
PIC18F4550T-I/PT
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
Philips Components
INA128UA/2K5
Texas Instruments
INA128UA/2K5 by Texas Instruments is an instrumentation amplifier with a max voltage gain of 10000 and bandwidth of 1.3 MHz. It operates at temperatures from -40 to 125 °C, making it suitable for automotive applications requiring precise signal amplification in compact spaces. With low bias current and high common mode rejection ratio, it ensures accurate measurements in challenging environments.
AD626BN
Analog Devices
AD626BN by Analog Devices is an instrumentation amplifier with a max input offset voltage of 2500 uV and a nominal voltage of 5 V. With a min voltage gain of 10, it finds application in industrial settings for precise signal amplification tasks. Its compact rectangular package makes it suitable for space-constrained environments.
AD8222ACPZ-R7
AD8222ACPZ-R7 by Analog Devices is an Instrumentation Amplifier with 150uV Max Input Offset Voltage, 1MHz Nominal Bandwidth, and 10000 Max Voltage Gain. Ideal for precision measurement applications requiring low offset voltage and high gain in industrial environments.
LT1789IS8-10#PBF
LT1789IS8-10#PBF by Analog Devices is an instrumentation amplifier with 160uV max input offset voltage, 0.04uA max average bias current, and 1000 max voltage gain. Ideal for industrial applications requiring precise signal amplification in a compact package with surface mount capability.
INA126U/2K5
Burr-Brown Corporation
INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
INA2141UA/1K
INA2141UA/1K by Texas Instruments is a 2-function instrumentation amplifier with max input offset voltage of 50uV and max bias current of 0.01uA. Ideal for industrial applications, it operates at -40 to 85°C with a bandwidth of 1MHz, making it suitable for precise signal amplification in various electronic systems.
XTR106PA
XTR106PA by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 25 uV, max average bias current of 0.05 uA, and min common mode reject ratio of 86 dB. It is commonly used in industrial applications for precise signal amplification and measurement.
AD526AD
AD526AD by Analog Devices is an Instrumentation Amplifier with 700uV Max Input Offset Voltage, 0.00015uA Max Average Bias Current, and 4MHz Nominal Bandwidth. Ideal for industrial applications requiring precise signal amplification in a compact package.
INA827AIDGKR
INA827AIDGKR by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 150uV and a nominal voltage of 15V. With a min voltage gain of 5, it is ideal for automotive applications requiring precise signal amplification. This surface-mount device operates in temperatures ranging from -40 to 125°C, making it suitable for various industrial environments.
INA849DGKR
INA849DGKR by Texas Instruments is an instrumentation amplifier with 35uV max input offset voltage, 28MHz bandwidth, and 120dB min CMRR. Ideal for precision signal processing in applications requiring high gain accuracy and noise rejection such as medical devices or industrial sensors.
INA141U/2K5
INA141U/2K5 by Texas Instruments is an instrumentation amplifier with 50uV max input offset voltage, 1MHz nominal bandwidth, and 117dB min CMRR. Ideal for industrial applications requiring precise signal amplification in a compact package.
AD595AD
AD595AD by Analog Devices is an instrumentation amplifier with 14 terminals, operating at -55 to 125 °C. It has a bandwidth of 0.015 MHz and max supply current of 0.3 mA. Ideal for military applications due to its bipolar technology and ceramic-metal-sealed package.
XTR105UA/2K5
INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
LT1167ACS8-1#PBF
LT1167ACS8-1#PBF by Analog Devices is an instrumentation amplifier with 60uV max input offset voltage, 0.00045uA max average bias current, and 1MHz nominal bandwidth. Ideal for precision measurement applications requiring high gain accuracy in a compact small outline package.
LT1789CS8-10#TR
LT1789CS8-10#TR by Analog Devices is an instrumentation amplifier with a max input offset voltage of 160uV and max average bias current of 0.04uA. It has a nominal voltage of 15V and a min voltage gain of 10, making it ideal for precision measurement applications requiring high accuracy and low power consumption in commercial temperature environments.
LTC6915CDE#PBF
LTC6915CDE#PBF by Analog Devices is an instrumentation amplifier with a max input offset voltage of 10uV and max average bias current of 0.01uA. It operates at a nominal voltage of 3V, making it suitable for precision measurement applications requiring low offset and bias currents. With a small outline package style and high common mode rejection ratio of 85dB, this amplifier is ideal for commercial temperature grade environments where accuracy and stability are crucial.
AD8429ARZ
AD8429ARZ by Analog Devices is an instrumentation amplifier with a max input offset voltage of 150uV, max average bias current of 0.3uA, and a nominal bandwidth of 15MHz. Ideal for automotive applications due to its temperature grade and high common mode reject ratio.
INA331IDGKT
The Texas Instruments INA331IDGKT is an instrumentation amplifier with a max input offset voltage of 500uV and max bias current of 0.00001uA. It operates at a nominal voltage of 5V, has a bandwidth of 2MHz, and is suitable for military-grade applications requiring precise signal amplification in compact spaces.
INA217AIDWTE4
Texas Instruments' INA217AIDWTE4 is an instrumentation amplifier with a max voltage gain of 10,000 and a bandwidth of 3.4 MHz. It operates at temperatures ranging from -40 to 125 °C and is suitable for automotive applications due to its high common mode reject ratio of 70 dB.
INA118UB
INA118UB by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 100uV and max bias current of 0.005uA. It operates at a nominal voltage of +-15V, has a bandwidth of 0.8MHz, and is ideal for industrial applications requiring precise signal amplification in tight spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
LTC6915HGN#PBF
LTC6915HGN#PBF by Analog Devices is an instrumentation amplifier with 10uV max input offset voltage, 0.01uA max average bias current, and 0.003uA max input offset current. Ideal for automotive applications due to its small outline package and wide operating temperature range of -40 to 125°C.
Linear Technology
INSTRUMENTATION AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;
LTC6915IGN#PBF
LTC6915IGN#PBF by Analog Devices is an instrumentation amplifier with a max input offset voltage of 10uV and max average bias current of 0.01uA. It operates at a nominal voltage of 3V, suitable for industrial applications requiring precise signal amplification in tight spaces. With a small outline package style and dual terminal position, it offers high performance in compact designs.
INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;
LTC6373HDFM#PBF
LTC6373HDFM#PBF by Analog Devices is a CMOS INSTRUMENTATION AMPLIFIER with 6.5 MHz bandwidth, 1190 uV max input offset voltage, and 0.0001 uA max input offset current. Ideal for precision signal processing applications requiring low bias current and high linearity in a compact package.
LTC6915IDE#PBF
LTC6915IDE#PBF by Analog Devices is an instrumentation amplifier with 10uV max input offset voltage, 0.01uA max average bias current, and 0.003uA max input offset current. It's used in industrial applications for precise signal amplification and noise rejection in a compact package with a small outline and thin profile.
INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: HVSON; Package Shape: RECTANGULAR;
LTC6373HDFM#TRPBF
INSTRUMENTATION AMPLIFIER; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: HVSON; Package Shape: SQUARE; Maximum Negative Supply Voltage Limit: -20 V;
LTC6915IDE#TRPBF
LTC6910-2ITS8#TRMPBF
LTC6910-2ITS8#TRMPBF by Analog Devices is an instrumentation amplifier with a max voltage gain of 100. It operates in industrial temperature range (-40 to 85 °C) and has a nominal voltage of 5V. Ideal for applications requiring precise signal amplification in compact spaces due to its small outline package style.
INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: VSSOP; Package Shape: RECTANGULAR;
LTC6915CGN#PBF
INSTRUMENTATION AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;
LTC6373IDFM#TRPBF
INSTRUMENTATION AMPLIFIER; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: HVSON; Package Shape: SQUARE; Maximum Average Bias Current (IIB): .00005 uA;
LTC6915HGN#TRPBF
LTC6915HGN#TRPBF by Analog Devices is a plastic/epoxy instrumentation amplifier with a max input offset voltage of 10uV and max average bias current of 0.01uA. It is commonly used in automotive applications due to its temperature grade and small outline package style.
LTC6373IDFM#PBF
LTC6373IDFM#PBF by Analog Devices is a CMOS instrumentation amplifier with a max input offset voltage of 275 uV and max average bias current of 0.00005 uA. It is used in applications requiring high precision amplification, such as medical devices and industrial control systems.
LTC6910-2CTS8#TRMPBF
INSTRUMENTATION AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: VSSOP; Package Shape: RECTANGULAR;
LTC6915CGN
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved