Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTC1562AIG#TR by Analog Devices is a CMOS active filter with 4 functions, -5V to 5V supply voltage range, and 150kHz max cutoff frequency. Ideal for industrial applications requiring resistor programmable transfer characteristics in a small outline package.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
Semicontronic
$2.690
$2.623
$2.609
One Stop Electronics
$7.690
Parana Technologies
$7.965
$7.408
IDEA Electronic Components Group
$8.565
$8.137
DigiPath Technology Company
$13.361
$12.827
MARBEL Systems
$17.199
AZTECH Wire
$17.291
Texas Native Microelectronics
$19.769
$18.385
$17.397
Kenton Components
$23.723
$20.876
Qasali Group International
$53.376
Vigor
Microchip USA
Corphita
Corohmni
Plastic/Epoxy material makes the package lightweight and durable, suitable for various applications.
Surface mount capability allows for easy and efficient installation on circuit boards.
Having 4 functions in one product provides flexibility and saves space on the PCB.
CMOS technology ensures low power consumption and high performance.
Operating at a nominal supply voltage of 5V ensures compatibility with standard electronic components.
Continuous time filtering offers accurate and reliable signal processing.
With a maximum operating temperature of 85 °C, this filter is suitable for industrial applications.
Having 2 poles and 0 zeros allows for precise control of filtering characteristics.
The maximum cutoff frequency range of 150 kHz provides versatility in filtering applications.
Being rated for industrial temperature range ensures reliability in harsh operating environments.
Active Filters LTC1562AIG#TR attributes and parameters. Explore more Active Filters devices from Analog Devices
Supply Voltage Limit:
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage:
Maximum Negative Supply Voltage:
Minimum Negative Supply Voltage:
Nominal Negative Supply Voltage:
Semiconductor Technology:
Response Type:
Filter Technology:
Maximum Frequency - Cutoff or Center:
Minimum Frequency - Cutoff or Center:
Transfer Characteristics:
Poles and Zeros:
Maximum Operating Temperature:
Minimum Operating Temperature:
Moisture Sensitivity Level (MSL):
Temperature Grade:
Total Functions:
Total Terminals:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Length:
Width:
Seated Height Limit:
Package Style:
Form Factor:
Package Code:
Package Body Material:
Surface Mounting:
JESD-30 Code:
JESD-609 Code:
Qualified:
LTC1562AIG#TR Active Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
L78L05ABZ-AP
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
NC7WZ17P6X
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Diodes Incorporated
MAX274BEWI
Maxim Integrated
MAX274BEWI by Maxim Integrated is an active filter with 30 mA Isup, -5.5 V to 5.5 V Vsup range, and 28 terminals in a small outline package. It is used in industrial applications for signal processing and noise filtering due to its wide operating temperature range of -40°C to 85°C.
TP3076N-G
SWITCHED CAPACITOR FILTER;
LTC1068IG
Analog Devices
LTC1068IG by Analog Devices is a CMOS active filter with 4 functions, -5.5V to 5.5V supply voltage range, and 50kHz max cutoff frequency. It is used for universal response type applications in industrial settings due to its switched capacitor filter technology and small outline package style.
MAX7419EUA+T
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Response Type: LOWPASS;
LTC1569IS8-7#TRPBF
Linear Technology
CONTINUOUS TIME FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Response Type: LOWPASS;
MAX297CWE+T
MAX297CWE+T by Analog Devices is an active filter with 8 poles, 0 zeros, and a cutoff frequency range of 50 kHz. It operates on a supply voltage of +/-5V and has a lowpass response type. Ideal for applications requiring elliptic transfer characteristics in commercial temperature grades.
MAX7425EUA+T
Analog Devices' MAX7425EUA+T is a BICMOS active filter with 8 terminals, operating b/w -40 to 85 °C. It features a lowpass response type, elliptic transfer characteristics, and 5 poles/0 zeros. Ideal for industrial applications requiring switched capacitor filters in compact spaces.
MAX274BCWI
MAX274BCWI by Maxim Integrated is a 28-terminal active filter with a max supply current of 30 mA. It operates at temperatures from 0 to 70°C and has a package style of small outline. Ideal for applications requiring precise filtering in electronic circuits.
MAX275PP
Analog Devices' MAX275PP is a 20-terminal active filter with -5V to 5V supply voltage range. It features 4 poles, 0 zeros, and resistor programmable transfer characteristics for bandpass/lowpass response. Ideal for applications requiring continuous time filtering up to 300 kHz cutoff frequency in plastic/epoxy package style.
LTC1164-7CN#TR
LTC1164-7CN#TR by Analog Devices is a 14-terminal active filter with switched capacitor technology. It operates in an industrial temperature range from -40 to 85 °C and has a cutoff frequency range up to 20 kHz. Ideal for lowpass filtering applications requiring precise Bessel transfer characteristics.
LTC1068IN
LTC1068IN by Analog Devices is a CMOS active filter with 4 functions, -5.5V to 5.5V supply voltage range, and 50 kHz cutoff frequency. Ideal for industrial applications requiring resistor programmable transfer characteristics in a 24-terminal rectangular package.
LT1066-1CS
LT1066-1CS by Analog Devices is a 18-terminal active filter with a max supply current of 33mA and nominal voltage of 7.5V. It is designed for surface mount applications in commercial temperature grades, featuring a small outline package style ideal for various electronic circuits.
TLC04IDR
TLC04IDR by Texas Instruments is a CMOS active filter with 8 terminals and switched capacitor technology. It operates at temperatures from -40 to 85°C, with a cutoff frequency range of 0.0001 kHz to 40 kHz. Ideal for industrial applications requiring lowpass Butterworth transfer characteristics.
MAX7410CUA+T
SWITCHED CAPACITOR FILTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Response Type: LOWPASS;
BA3830S
ROHM
BA3830S by ROHM is a 5V active switched capacitor filter with 18 terminals. It operates b/w -25 to 75°C, with a max supply current of 5.2mA and power supplies ranging from 4.5-8V. Ideal for bandpass filtering applications due to its resistor programmable transfer characteristics.
MAX7403ESA+
Analog Devices' MAX7403ESA+ is an active filter with 8 poles and 0 zeros, operating at a cutoff frequency range of 10 kHz. It features lowpass response type with elliptic transfer characteristics, suitable for industrial applications requiring a nominal voltage of 5V. The compact rectangular package style with gull wing terminals makes it ideal for surface mount installations.
LT1568CGN#TR
LT1568CGN#TR by Analog Devices is a dual-function active filter with continuous-time filter type. It operates at a nominal voltage of 5V and has poles and zeros of 2 and 0 respectively. With response types including bandpass/lowpass, it is ideal for industrial applications requiring precise filtering capabilities up to a max cutoff frequency range of 10MHz.
MF10CCWM/NOPB
The Texas Instruments MF10CCWM/NOPB is a CMOS active filter with 20 terminals and a small outline package. It operates b/w -7V to 7V, with a cutoff frequency range of 0.0002 kHz to 20 kHz. Ideal for applications requiring universal response types in commercial temperature grades.
LTC1569CS8-6#PBF
LTC1569CS8-6#PBF by Analog Devices is a CMOS active filter with 10 poles and 0 zeros. It operates at a nominal voltage of 3V, has a cutoff frequency range of 0-64 kHz, and offers resistor programmable transfer characteristics. Ideal for lowpass filtering applications in commercial temperature grades.
TSG8510VP
TSG8510VP by STMicroelectronics is an active filter with CMOS technology. It has a max supply current of 5 mA and operates at temperatures ranging from -40 to 85 °C. Ideal for industrial applications, this switched capacitor filter has 16 terminals and a nominal voltage of ±5V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
LTC1060CSW#PBF
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Response Type: UNIVERSAL;
LTC1569IS8-7#PBF
LTC1569IS8-7#PBF by Analog Devices is a small outline active filter with continuous time filtering, 10 poles and 0 zeros. It operates in an industrial temperature range from -40 to 85°C, with a cutoff frequency of up to 150 kHz. Ideal for lowpass applications, it offers pin or resistor programmable transfer characteristics.
LTC1563-2CGN#PBF
LTC1563-2CGN#PBF by Analog Devices is a 16-terminal active filter with continuous time filtering, operating b/w 0 to 70°C. It features a lowpass response type with Butterworth transfer characteristics and a max cutoff frequency range of 256 kHz. This small outline, surface-mount device is commonly used in commercial applications requiring precise signal filtering.
CONTINUOUS TIME FILTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Response Type: LOWPASS;
LTC1569IS8-7
LTC1064-2CN#PBF
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Response Type: LOWPASS;
LTC1569IS8-7#TR
LTC1060CSW#TRPBF
LTC1060CSW#TRPBF by Analog Devices is a CMOS active filter with 2 functions. It has a max operating temperature of 85°C and a min supply voltage of 2.37V. This switched capacitor filter is commonly used in industrial applications for its universal response type and transfer characteristics (Butterworth/Bessel/Chebyshev).
LTC1563-2IGN#TRPBF
CONTINUOUS TIME FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Response Type: LOWPASS;
LTC1563-2IGN#PBF
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved