Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HMC939LP4ETR by Analog Devices is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 25.05 dBm Max Input Power (CW), and 8.5 dB Max Insertion Loss. It operates b/w -40 to 85°C, has a Matte Tin finish, and is ideal for applications requiring variable attenuation in the frequency range of 100 MHz to 33 GHz.
Median Price
$89.430
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Arrow
1+ parts
$103.550
100+ parts
-
1k+ parts
$75.310
10k+ parts
$71.010
Verical
Rochester
Digiode
$98.372
Vyrian
ACDS - Activité Composants Distribution Service
Nova Conductors
Parana Technologies
$2.147
$1.997
IDEA Electronic Components Group
$2.309
$2.194
DigiPath Technology Company
$3.602
$3.458
Semicontronic
$64.010
$62.410
$62.090
Corphita
$93.195
Perfect Parts
Aranea Global
The use of plastic/epoxy material allows for lightweight and durable construction, making it ideal for various applications.
With a high maximum input power handling capacity, this attenuator can effectively handle strong signals without distortion or damage.
The high level of nominal attenuation ensures effective signal reduction while maintaining signal integrity in the RF/microwave applications.
The wide range of power supply compatibility (+-5V) allows for versatile integration into different systems.
The high maximum operating temperature of 85°C ensures reliable performance even in demanding environmental conditions.
The low minimum operating temperature of -40°C allows for operation in cold environments without impacting performance.
With a low maximum insertion loss, this attenuator minimizes signal loss during attenuation, ensuring efficient signal transmission.
The Gallium Arsenide (GaAs) technology used in this attenuator provides high linearity and low noise figure, making it suitable for high-performance RF/microwave applications.
The standard 50 ohm characteristic impedance ensures compatibility with a wide range of RF/microwave systems and components.
With a high maximum operating frequency of 33 GHz, this attenuator can effectively attenuate signals in a wide frequency range.
RF/Microwave Attenuators HMC939LP4ETR attributes and parameters. Explore more RF/Microwave Attenuators devices from Analog Devices
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Insertion Loss:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Technology:
Terminal Finish:
HMC939LP4ETR RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
NXP Semiconductors
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
Microsemi
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
55-2
Api Technologies
FIXED ATTENUATOR; Construction: COAXIAL; Minimum Operating Frequency: 0 MHz; Minimum Operating Temperature: -55 Cel; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 18000 MHz;
54-6
Cobham Plc
54-6 by Cobham Plc is a RF/Microwave Attenuator with 6 dB nominal attenuation, 1.6 max VSWR, and 33.01 dBm max input power (CW). Constructed coaxially with gold terminal finish, it operates from -55°C to 125°C. Ideal for fixed attenuator applications in the frequency range of 0-40000 MHz.
PE43705A-Z
Psemi
PE43705A-Z by Psemi is a RF/Microwave Attenuator with 31.75 dB Nominal Attenuation, 28 dBm Max Input Power (CW), and 3.2 dB Max Insertion Loss. It operates b/w -40 to 105 °C, has a CMOS Technology, and is ideal for applications requiring variable attenuation in the frequency range of 50 MHz to 8 GHz.
LCAT1002-07
Infinite Electronics International
FIXED ATTENUATOR;
HMC-VVD104
Analog Devices
Analog Devices' HMC-VVD104 is a 14 dB RF/Microwave Attenuator with 3 dB max insertion loss. Operating from -55°C to 85°C, it has a frequency range of 70-86 GHz and impedance of 50 ohm. Ideal for variable attenuation in high-frequency applications.
TGL4203
Triquint Semiconductor
VARIABLE ATTENUATOR; Maximum Input Power (CW): 23.98 dBm; Minimum Operating Frequency: 0 MHz; Maximum Operating Frequency: 50000 MHz; Nominal Attenuation: 17 dB; Maximum Insertion Loss: 2 dB;
HV-AT(20)-PJ
Hirose Electric
HV-AT(20)-PJ by Hirose Electric is a 20 dB fixed attenuator with max input power of 30 dBm and VSWR of 1.6. Ideal for RF applications, it operates b/w -10°C to 65°C with characteristic impedance of 50 ohm.
44-30
FIXED ATTENUATOR; Construction: COAXIAL; Maximum Voltage Standing Wave Ratio: 1.25; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 18000 MHz; Nominal Attenuation: 30 dB;
MAATCC0005
M/a-com Technology Solutions
VARIABLE ATTENUATOR; JESD-609 Code: e3; Nominal Attenuation: 31.5 dB; Maximum Insertion Loss: 4.2 dB; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel;
HMC812LC4RTR
Analog Devices' HMC812LC4RTR is a RF/Microwave Attenuator with 24 terminals, operating temperature range of -40 to 85°C. Made of ceramic, it utilizes GaAs technology and surface mounting feature. Ideal for high-frequency applications in communication systems and radar equipment.
47-10-42
FIXED ATTENUATOR; Terminal Finish: Gold (Au); Construction: COAXIAL; Nominal Attenuation: 10 dB; JESD-609 Code: e4; Maximum Operating Temperature: 125 Cel;
44-20
FIXED ATTENUATOR; Terminal Finish: GOLD; Construction: COAXIAL; JESD-609 Code: e4; Minimum Operating Temperature: -50 Cel; Maximum Input Power (CW): 36.99 dBm;
75-10-11
75-10-11 by Cobham Plc is a fixed attenuator with 10 dB nominal attenuation, handling up to 36.99 dBm CW power and supporting frequencies from 0 to 40 GHz. Ideal for RF/microwave applications, it boasts a low VSWR of 1.35 and operates in temperatures ranging from -55°C to 125°C.
17-1
FIXED ATTENUATOR; Characteristic Impedance: 50 ohm; JESD-609 Code: e4; Maximum Voltage Standing Wave Ratio: 1.2; Minimum Operating Temperature: -50 Cel; Terminal Finish: GOLD;
PAT0510S-C-0DB-T10
Susumu
Susumu's PAT0510S-C-0DB-T10 is a 50 ohm fixed attenuator with 0 dB nominal attenuation, handling up to 15.05 dBm CW power. With a VSWR of 1.3, it operates from -55°C to 125°C, making it ideal for RF/Microwave applications up to 10 GHz.
HMC306MS10
Hittite Microwave
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 10; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Nominal Attenuation: 15.5 dB;
M3933/25-36S
Cinch Connectivity Solutions
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Additional Features: SMA-F; SMA-M, I/P POWER-MAX(PEAK)=500W; Construction: COAXIAL; Maximum Input Power (CW): 33.01 dBm; Minimum Operating Frequency: 0 MHz;
HMC939
Analog Devices' HMC939 is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 7.5 dB Max Insertion Loss, and 24.91 dBm Max Input Power (CW). It operates b/w -55 to 85°C, has a GAAS Technology, and supports frequencies from 100 MHz to 40 GHz. Ideal for variable attenuation in RF/microwave systems.
HMC653LP2ETR
HMC653LP2ETR by Analog Devices is a surface mount RF/microwave attenuator with 6 terminals. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This fixed attenuator is commonly used in applications requiring precise signal attenuation.
PAT1220-C-0DB-T5
The Susumu PAT1220-C-0DB-T5 is a fixed attenuator with 0 dB nominal attenuation, 20 dBm CW input power, and 1.3 max VSWR. Ideal for RF/Microwave applications with a frequency range of 0-10000 MHz, operating from -55 to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
HMC939ALP4ETR
HMC939ALP4ETR by Analog Devices is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 27 dBm Max Input Power (CW), and 8 dB Max Insertion Loss. It operates b/w -40 to 85°C, has a GAAS Technology, and supports frequencies from 100 MHz to 33 GHz. Ideal for variable attenuation in RF/microwave applications.
HMC939ALP4E
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Technology: GAAS; Maximum Input Power (CW): 27 dBm; Maximum Insertion Loss: 8 dB;
HMC939A
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; Technology: GAAS; Additional Features: CMOS COMPATIBLE; Minimum Operating Temperature: -40 Cel; Maximum Input Power (CW): 27 dBm;
HMC939ATCPZ-EP-PT
Analog Devices' HMC939ATCPZ-EP-PT is a RF attenuator with 31 dB attenuation, 27 dBm CW input power, and 8 dB insertion loss. Ideal for applications requiring variable attenuation in the frequency range of 100 MHz to 33 GHz.
HMC939ATCPZ-EP-R7
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Maximum Supply Current: 6.5 mA; Nominal Attenuation: 31 dB;
HMC941ALP4E
Analog Devices' HMC941ALP4E is a RF/Microwave Attenuator with 15.5 dB Nominal Attenuation, 6.5 dB Max Insertion Loss, and 26.99 dBm Max Input Power (CW). Ideal for applications requiring variable attenuation in the frequency range of 100 MHz to 33 GHz.
HMC941LP4TR
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: LCC24,.16SQ,20;
HMC973LP3E
VARIABLE ATTENUATOR; Nominal Attenuation: 28 dB; Construction: COMPONENT; Minimum Operating Frequency: 500 MHz; Maximum Operating Frequency: 6000 MHz; Terminal Finish: Matte Tin (Sn);
HMC939LP4TR
HMC973LP3ETR
Analog Devices' HMC973LP3ETR is a GaAs technology RF attenuator with 16 terminals, operating b/w -40°C to 85°C. It has a max supply current of 0.3mA at 5V power supply, suitable for surface mount applications in RF/Microwave systems.
HMC941
VARIABLE ATTENUATOR; Minimum Operating Frequency: 100 MHz; Maximum Operating Temperature: 85 Cel; Nominal Attenuation: 15.5 dB; Maximum Input Power (CW): 26.99 dBm; Maximum Insertion Loss: 4.8 dB;
HMC941LP4ETR
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Supply Current: 6.5 mA;
HMC939LP4E
VARIABLE ATTENUATOR; Maximum Input Power (CW): 25.05 dBm; Minimum Operating Temperature: -40 Cel; Characteristic Impedance: 50 ohm; JESD-609 Code: e3; Maximum Operating Frequency: 33000 MHz;
HMC973ALP3E
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Terminal Finish: MATTE TIN;
HMC941A
VARIABLE ATTENUATOR; No. of Terminals: 9; Technology: GAAS; Maximum Operating Temperature: 85 Cel; Maximum Supply Current: 7 mA; Construction: COMPONENT;
VARIABLE ATTENUATOR; Technology: GAAS; Power Supplies (V): 5; Maximum Operating Frequency: 40000 MHz; Minimum Operating Frequency: 100 MHz; Maximum Supply Current: 7 mA;
HMC941LP4
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Insertion Loss: 6.5 dB;
HMC939LP4
VARIABLE ATTENUATOR; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel; Construction: COMPONENT; Maximum Operating Frequency: 33000 MHz; Maximum Input Power (CW): 25.05 dBm;
HMC941LP4E
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Construction: COMPONENT;
HMC939LP4ETR
VARIABLE ATTENUATOR; Maximum Operating Frequency: 33000 MHz; Minimum Operating Frequency: 100 MHz; Nominal Attenuation: 31 dB; JESD-609 Code: e3; Maximum Input Power (CW): 25.05 dBm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved