Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC6787ALC5ATR-R5 is a RF/Microwave Up Converter with 37-40 GHz output frequency range, 7 dB min gain, and GaAs technology. Ideal for applications requiring high-frequency conversion in components with ceramic package body material and gold over nickel terminal finish.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Parana Technologies
$1.891
$1.758
IDEA Electronic Components Group
$2.033
$1.931
Semicontronic
$3.000
$2.925
$2.910
DigiPath Technology Company
$3.171
$3.045
One Stop Electronics
$7.000
AZTECH Wire
$8.380
Ampacity Inc.
$9.000
Component Stockers USA
$911.360
Corphita
Ceramic material provides excellent thermal conductivity and durability, ensuring stable performance even in harsh environments.
High maximum RF output frequency allows for a wide range of applications and flexibility in signal processing.
Component-based construction enables easy integration into existing systems and facilitates customization for specific requirements.
Low minimum RF output frequency ensures support for a variety of input signals and compatibility with different devices.
Low power supply voltage requirement helps in reducing overall power consumption and improving energy efficiency.
Sufficient number of terminals allow for easy connectivity and signal routing, making installation and setup convenient.
Minimum up conversion gain of 7dB ensures strong signal amplification and improved signal quality for better performance.
High maximum operating temperature tolerance enables reliable operation in a wide range of environmental conditions.
Low minimum operating temperature tolerance allows for use in extreme cold conditions without impacting performance.
Gold over nickel terminal finish provides superior conductivity and corrosion resistance for long-term reliability.
Tunable LO (Local Oscillator) allows for precise frequency adjustments, enhancing signal processing and customization capabilities.
Gallium Arsenide (GaAs) technology offers high-frequency performance, low noise, and high reliability, ensuring consistent operation.
Up converter device type enables conversion of lower frequency signals to higher frequency, expanding signal processing options.
Standard 50 ohm characteristic impedance ensures compatibility with a wide range of RF devices and components.
Low minimum intermediate frequency allows for direct conversion and processing of RF signals without additional filtering or processing.
High maximum intermediate frequency support enables processing of a wide range of RF signals with varying frequency levels.
Surface mounting feature simplifies installation and enhances compactness, making it suitable for space-constrained applications.
RF/Microwave Up/Down Converters HMC6787ALC5ATR-R5 attributes and parameters. Explore more RF/Microwave Up/Down Converters devices from Analog Devices
Characteristic Impedance:
Construction:
Maximum Intermediate Frequency (IF):
Minimum Intermediate Frequency (IF):
JESD-609 Code:
LO Tunable:
Mounting Feature:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Power Supplies (V):
Maximum RF Output Frequency:
Minimum RF Output Frequency:
RF or Microwave Device Type:
Technology:
Terminal Finish:
Minimum Up Conversion Gain:
HMC6787ALC5ATR-R5 RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Kec
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
MBR0540T1G
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
NE555D
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
UPC3220GR
Renesas Electronics
DOWN CONVERTER; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Operating Temperature: 85 Cel; Minimum Down Conversion Gain: 18 dB; Construction: COMPONENT;
DRR1-3823
Broadcom
DOWN CONVERTER; Maximum Operating Temperature: 70 Cel; Minimum Intermediate Frequency (IF): 1240 MHz; Maximum RF Input Frequency: 40000 MHz; Minimum RF Input Frequency: 37000 MHz; Minimum Operating Temperature: -30 Cel;
UPC2721GV-A
DOWN CONVERTER; Minimum Down Conversion Gain: 18 dB; Maximum Operating Temperature: 85 Cel; Minimum RF Input Frequency: 900 MHz; Characteristic Impedance: 50 ohm; Minimum Intermediate Frequency (IF): 50 MHz;
HMC7586
Analog Devices
Analog Devices' HMC7586 is a GAAS technology RF down converter with 40 terminals. It operates b/w -55°C to 85°C, offering a min gain of 8 dB. Ideal for RF applications, it converts signals from 71-76 GHz to an IF range of 0-10 GHz.
CLC5903SM/NOPB
DOWN CONVERTER; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); JESD-609 Code: e1;
MAX2700ECM-TD
Maxim Integrated
DOWN CONVERTER; Terminal Finish: Tin/Lead (Sn/Pb); Characteristic Impedance: 50 ohm; Minimum RF Input Frequency: 1800 MHz; Construction: COMPONENT; LO Tunable: YES;
HMC572LC5RTR
Analog Devices' HMC572LC5RTR is a RF/Microwave Up/Down Converter with 32 terminals, operating at -55 to 85°C. Utilizing GaAs technology, it requires 3.5V supply voltage and draws a max current of 150mA. Ideal for surface mount applications in various communication systems.
MAX2660EUT-T
MAX2660EUT-T by Maxim Integrated is a RF/Microwave Up/Down Converter with a max RF output frequency of 2500 MHz and a max voltage standing wave ratio of 2.2. It is commonly used in applications such as wireless communication systems and satellite receivers.
MAX9986ETP+
MAX9986ETP+ by Analog Devices is a RF/Microwave DOWN CONVERTER with 20 terminals, BICMOS tech, and 5V power supply. It offers a min down conversion gain of 9 dB, LO tunable feature, and max noise figure of 9.3 dB. Ideal for applications requiring RF signal processing in the frequency range of 815-995 MHz with a characteristic impedance of 50 ohm.
MAX9993ETP+T
MAX9993ETP+T by Analog Devices is an RF down converter with LO tunable feature. It operates b/w -40 to 85 °C, supporting RF input frequencies from 1700 to 2200 MHz. With a VSWR of 1.5 and IF range of 50-350 MHz, it's ideal for RF/Microwave applications.
HMC1065LP4E
HMC1065LP4E by Analog Devices is an RF/Microwave DOWN CONVERTER with a 27-34 GHz RF input frequency range and 0-4 GHz IF output. It offers a min gain of 9 dB, LO tunability, and operates b/w -40°C to +85°C. Ideal for applications requiring high-performance RF signal conversion in various communication systems.
HMC7584LG
Analog Devices' HMC7584LG is an RF up converter with a frequency range of 71-76 GHz. It operates in temperatures from -40 °C to 85°C and has a tunable LO. With characteristic impedance of 50 ohm, it's ideal for microwave applications requiring IF frequencies up to 2 GHz.
HMC925LC5TR
Analog Devices' HMC925LC5TR is a GaAs RF up converter with 32 terminals, operating b/w -40 °C to 85°C. It requires a 5V power supply and features a ceramic package body material. Ideal for RF/microwave applications, it is designed for surface mounting.
UPC2756T-E3
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Operating Temperature: 85 Cel;
TDA8060ATS
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Maximum Supply Current: 93 mA; Power Supplies (V): 5;
UPC1686G
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Package Equivalence Code: SOP8,.25;
HMC621LP4TR
Analog Devices' HMC621LP4TR is a 24-terminal RF down converter with a plastic/epoxy package. Operating at temperatures from -40 to 85 °C, it requires a 5V power supply and draws a max current of 325mA. Ideal for surface mount applications in RF/Microwave systems.
F1701NBGI8
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; LO Tunable: YES; Maximum Supply Current: 210 mA;
MAX2681
MAX2681 by Analog Devices is a RF/Microwave DOWN CONVERTER with 14.2 dB Min Gain, 400-2500 MHz RF Input Frequency range, and 10-500 MHz IF. It features LO Tuning capability and 7 dB Noise Figure. Ideal for applications requiring high-performance frequency conversion in RF systems.
HMC908ALC5
Analog Devices' HMC908ALC5 is an RF down converter with 7 dB min gain, LO tunable, and 50 ohm impedance. Operating from -40 to 85 °C, it converts RF signals from 9-12 GHz to IF up to 3.5 GHz. Ideal for RF/microwave applications requiring high-performance down conversion in a compact component form factor.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Maximum Supply Current: 325 mA; Maximum Operating Temperature: 85 Cel;
HMC6147ALC5ATR
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: CERAMIC; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
HMC6787ALC5A
UP CONVERTER; Minimum Operating Temperature: -40 Cel; Construction: COMPONENT; Maximum Intermediate Frequency (IF): 4000 MHz; Minimum RF Output Frequency: 37000 MHz; Minimum Up Conversion Gain: 7 dB;
HMC6505ALC5TR
UP CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: CERAMIC; Technology: GAAS; Minimum RF Output Frequency: 5500 MHz;
HMC621LP4ETR
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: LCC24,.16SQ,20; Power Supplies (V): 5;
HMC6789BLC5A
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: CERAMIC; Technology: GAAS; Power Supplies (V): 3;
HMC6146BLC5ATR
UP CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: CERAMIC; Technology: GAAS; JESD-609 Code: e4;
HMC6505ALC5
UP CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: CERAMIC; Technology: GAAS; Characteristic Impedance: 50 ohm;
HMC621LP4
DOWN CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Maximum Output Power: 10 dBm; Minimum RF Input Frequency: 900 MHz;
HMC6505LC5TR
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: CERAMIC; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC6505ALC5TR-R5
UP CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: CERAMIC; Technology: GAAS; Minimum Intermediate Frequency (IF): 0 MHz;
HMC621LP4ERTR
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: LCC24,.16SQ,20; Power Supplies (V): 5;
HMC6787ALC5ATR
UP CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: CERAMIC; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
HMC6147ALC5A
DOWN CONVERTER; JESD-609 Code: e4; Minimum RF Input Frequency: 37000 MHz; Minimum Down Conversion Gain: 10 dB; Construction: COMPONENT; Minimum Operating Temperature: -40 Cel;
HMC621LP4RTR
RF/Microwave Up/Down Converters; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: LCC24,.16SQ,20; Maximum Operating Temperature: 85 Cel;
HMC6146BLC5A
UP CONVERTER; Minimum Up Conversion Gain: 7 dB; Minimum Operating Temperature: -40 Cel; Maximum RF Output Frequency: 44000 MHz; Characteristic Impedance: 50 ohm; Maximum Intermediate Frequency (IF): 4000 MHz;
HMC6146BLC5ATR-R5
UP CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: CERAMIC; Technology: GAAS; Characteristic Impedance: 50 ohm;
HMC621LP4E
DOWN CONVERTER; Maximum RF Input Frequency: 1600 MHz; Maximum Operating Temperature: 85 Cel; Minimum Down Conversion Gain: 23 dB; Terminal Finish: MATTE TIN; Maximum Intermediate Frequency (IF): 500 MHz;
HMC6505LC5
UP CONVERTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: CERAMIC; Technology: GAAS; Package Equivalence Code: LCC32,.2SQ,20;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved