Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC629LP4RTR is a GAAS RF attenuator with 24 terminals, operating from -40 to 85°C. It has a 5V power supply, surface mount feature, and plastic/epoxy package. Ideal for RF/microwave applications requiring precise signal attenuation in various temperature environments.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Parana Technologies
$1.435
$1.335
IDEA Electronic Components Group
$1.543
$1.466
DigiPath Technology Company
$2.407
$2.311
One Stop Electronics
$10.000
AZTECH Wire
$16.965
Ampacity Inc.
$27.000
Semicontronic
$39.000
$38.025
$37.830
Corphita
This material provides durability and protection for the internal components, ensuring a long lifespan for the attenuator.
This low voltage requirement makes it suitable for a wide range of applications and compatible with various power sources.
With a high number of terminals, this attenuator can handle complex signal routing and connections, making it versatile in use.
The high maximum operating temperature allows for reliable performance even in harsh environments with elevated temperatures.
The low minimum operating temperature ensures that this attenuator can function effectively in cold conditions, offering versatility in a variety of environments.
Gallium Arsenide (GAAS) technology provides high-quality performance and low noise characteristics, making this attenuator ideal for sensitive RF applications.
The surface mount capability simplifies installation and allows for compact integration into electronic designs, saving space and enabling easy assembly.
RF/Microwave Attenuators HMC629LP4RTR attributes and parameters. Explore more RF/Microwave Attenuators devices from Analog Devices
Mounting Feature:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
Sub-Category:
Technology:
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
MBRS340T3G
Onsemi
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
4554
Jw Miller Magnetics
Other Semiconductors;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
AT-12+
Mini-circuits
Mini-circuits AT-12+ is a 12 dB fixed attenuator with max input power of 30 dBm and VSWR of 1.7, ideal for RF applications up to 1500 MHz. It features a characteristic impedance of 50 ohms and is designed as a component for signal attenuation in RF/microwave circuits.
23-1-3
Cobham Plc
23-1-3 by Cobham Plc is a COAXIAL FIXED ATTENUATOR with 50 ohm impedance. It has a max input power of 43.01 dBm and VSWR of 1.35, suitable for RF/Microwave applications up to 18 GHz with operating temperatures from -55°C to 125°C.
AT0603T02ECAS3
American Technical Ceramics
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Technology: AIN; Screening Level: MIL-STD-883; Maximum Voltage Standing Wave Ratio: 1.25;
2067-9
2067-9 by Cobham Plc is a fixed attenuator with 9 dB nominal attenuation, suitable for RF/Microwave applications. It has a max input power of 30 dBm and a VSWR of 1.25, making it ideal for use in high-frequency environments up to 12400 MHz. With COAXIAL construction and GOLD terminal finish, it operates b/w -20°C to 75°C efficiently.
PAT0510S-C-0DB-T10
Susumu
Susumu's PAT0510S-C-0DB-T10 is a 50 ohm fixed attenuator with 0 dB nominal attenuation, handling up to 15.05 dBm CW power. With a VSWR of 1.3, it operates from -55°C to 125°C, making it ideal for RF/Microwave applications up to 10 GHz.
HMC939A
Analog Devices
HMC939A by Analog Devices is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 7.8 dB Max Insertion Loss, and operates from 100 MHz to 40 GHz. It features GAAS technology, +-5V power supplies, and can handle up to 27 dBm CW input power. Ideal for variable attenuation in RF/microwave systems with a characteristic impedance of 50 ohms.
66-10-13
Api Technologies
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Nominal Attenuation: 10 dB; Maximum Voltage Standing Wave Ratio: 1.9; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel;
45-20-14
Aeroflex/weinschel
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Minimum Operating Temperature: -55 Cel; Construction: COAXIAL; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e4;
75-10-11
FIXED ATTENUATOR; Maximum Operating Frequency: 40000 MHz; Construction: MODULE; Maximum Input Power (CW): 36.99 dBm; Minimum Operating Temperature: -55 Cel; Minimum Operating Frequency: 0 MHz;
HMC291TR
HMC291TR by Analog Devices is a GAAS technology RF attenuator with 12 dB attenuation and 1.6 dB insertion loss. It operates b/w 700 MHz to 4000 MHz, handling up to 28 dBm CW power. Ideal for RF/microwave applications, this surface-mount device has a max temperature range of -40 °C to 85°C.
M1-2
FIXED ATTENUATOR; Construction: COAXIAL; Maximum Operating Temperature: 125 Cel; Maximum Input Power (CW): 40 dBm; Minimum Operating Frequency: 0 MHz; Additional Features: N-M, I/P POWER-MAX(PEAK)=1000W;
HMC346C8
HMC346C8 by Analog Devices is a RF/Microwave Attenuator with 30 dB Nominal Attenuation, 3.1 dB Max Insertion Loss, and 50 ohm Characteristic Impedance. It operates from -40 to 85°C and covers frequencies from 0 to 8000 MHz. Ideal for applications requiring precise signal attenuation in RF/microwave circuits.
745
Lockheed Martin Microwave
VARIABLE ATTENUATOR; Construction: MODULE; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 18000 MHz; Minimum Operating Frequency: 0 MHz; Maximum Voltage Standing Wave Ratio: 1.65;
48-40-22
FIXED ATTENUATOR; Additional Features: 3.5 MM-M, I/P POWER-MAX(PEAK)=1000W; Maximum Input Power (CW): 50 dBm; Maximum Voltage Standing Wave Ratio: 1.45; Minimum Operating Frequency: 0 MHz; Maximum Operating Temperature: 125 Cel;
HMC541LP3E
Analog Devices' HMC541LP3E is a RF/Microwave Attenuator with 10 dB Nominal Attenuation, 26.99 dBm Max Input Power (CW), and 2.3 dB Max Insertion Loss. This GAAS technology-based variable attenuator operates from 0 to 5000 MHz, ideal for applications requiring precise signal control in high-frequency circuits.
17-1
17-1 by Cobham Plc is a RF/Microwave Attenuator with max input power of 36.99 dBm, VSWR of 1.2, and attenuation of 1 dB. It operates from -50°C to 85°C, has gold terminal finish, and covers frequencies from 0 MHz to 18 GHz. Ideal for fixed attenuator applications in various RF/microwave systems.
779-7
L-3 Narda-miteq
FIXED ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.4; Maximum Operating Frequency: 18000 MHz; Nominal Attenuation: 7 dB; Construction: COAXIAL; Maximum Input Power (CW): 33.01 dBm;
44-3
FIXED ATTENUATOR; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 0 MHz; Terminal Finish: GOLD; Minimum Operating Temperature: -50 Cel; Construction: COAXIAL;
55-3
FIXED ATTENUATOR; Maximum Operating Frequency: 18000 MHz; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 0 MHz; Construction: COAXIAL; Maximum Voltage Standing Wave Ratio: 1.35;
HMC274QS16TR
VARIABLE ATTENUATOR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
HMC624ALP4ETR
Hittite Microwave
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC655LP2ETR
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Minimum Operating Temperature: -40 Cel; Package Equivalence Code: SOLCC6,.08,25;
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; Package Equivalence Code: SOLCC6,.08,25;
HMC658LP2E
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Nominal Attenuation: 20 dB; Maximum Input Power (CW): 25 dBm;
Analog Devices' HMC658LP2E is a 20 dB fixed attenuator with 25 dBm CW input power, ideal for RF applications. Constructed with plastic/epoxy, it has a characteristic impedance of 50 ohm and operates from -40 to 85°C. Suitable for surface mount installations, it covers frequencies from 0 to 25 GHz.
HMC652LP2ETR
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
HMC624LP4ETR
Hittite Microwave's HMC624LP4ETR is a 50 ohm RF attenuator with 31.5 dB nominal attenuation and 3.8 dB max insertion loss, suitable for frequencies ranging from 0-6000 MHz. It can handle up to 27.99 dBm CW input power, making it ideal for RF/Microwave applications requiring precise signal control in temperatures from -40 to 90°C.
HMC655LP2E
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 85 Cel;
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Construction: COMPONENT; Terminal Finish: Tin (Sn);
HMC658LP2ETR
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn) - annealed;
HMC656LP2E
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 0 MHz;
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel;
HMC629ALP4ETR
HMC629ALP4ETR by Analog Devices is a RF/Microwave Attenuator with 45 dB Nominal Attenuation, 27.99 dBm Max Input Power (CW), and operates from -40 to 85°C. It is a variable attenuator suitable for applications requiring precise signal control in the frequency range of 0-10 GHz.
HMC653LP2ETR
HMC653LP2ETR by Analog Devices is a surface mount RF/microwave attenuator with 6 terminals. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This fixed attenuator is commonly used in applications requiring precise signal attenuation.
HMC629LP4ERTR
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Power Supplies (V): 5;
HMC624ACPSZ-EP-RL7
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 105 Cel;
HMC629LP4ETR
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: LCC24,.16SQ,20;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved