Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC574MS8ETR is a GAAS SPDT RF switch with 3000 MHz max frequency, 0.8 dB insertion loss, and 16 dB isolation. It operates b/w -40 to 85 °C with 5V supply, making it ideal for RF/microwave applications requiring high compression point and fast response time.
Median Price
$3.360
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Verical
Digiode
$3.192
Vyrian
Cyclops Electronics Ltd
IBS Electronics
Parana Technologies
$0.844
$0.785
IDEA Electronic Components Group
$0.908
$0.863
DigiPath Technology Company
$1.416
$1.360
Semicontronic
$2.860
$2.788
$2.774
Corphita
$3.024
Component Stockers USA
$3.710
Authorized Procurement Solutions
RC Electronics
$2.970
$2.700
$2.600
Kepictronics
Epart123
$1.920
Perfect Parts
S.R.D Solutions
Assy Fe
ChipstoGo Electronic ltd
PLASTIC/EPOXY material provides durability and protection for the internal components, making the switch suitable for long-term use in various environments.
High compression point allows the switch to handle high power levels without distortion, ensuring reliable performance in high-power applications.
Operating at 5V makes it compatible with standard power supplies, making integration into existing systems easier.
Having 8 terminals provides flexibility for connecting to multiple input and output sources, allowing for versatile routing options.
With a maximum operating temperature of 85 °C, this switch can operate reliably in various temperature conditions without overheating.
The wide range of minimum operating temperature (-40 °C) allows the switch to function in extremely cold environments without performance degradation.
MATTE TIN finish on terminals ensures excellent conductivity and solderability, contributing to reliable signal transmission.
Low insertion loss (0.8 dB) minimizes signal attenuation during switching, preserving signal integrity and reducing power consumption.
Fast nominal on time (0.12 microseconds) allows for quick switching between RF or microwave devices, enhancing system performance and responsiveness.
Utilizing Gallium Arsenide (GAAS) technology ensures high frequency capabilities and low noise operation, making the switch suitable for demanding RF/microwave applications.
Single-Pole Double-Throw (SPDT) configuration offers flexibility in routing signals between two paths, making it versatile for diverse RF/microwave setups.
High minimum isolation (16 dB) between input and output ports prevents signal leakage or interference, ensuring clean and stable signal transmission.
Surface mount design simplifies installation and integration into circuit boards, saving space and facilitating mass production of RF/microwave systems.
Supporting a high maximum operating frequency (3000 MHz) allows the switch to handle GHz-range signals, making it suitable for high-frequency RF/microwave applications.
Reflective port termination helps in impedance matching, reducing signal reflections and ensuring maximum power transfer between connected components.
RF/Microwave Switches HMC574MS8ETR attributes and parameters. Explore more RF/Microwave Switches devices from Analog Devices
Compression Point (1 dB):
Maximum Insertion Loss:
Minimum Isolation:
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Nominal On Time:
Maximum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Port Termination:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Technology:
Terminal Finish:
HMC574MS8ETR RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
2N2222A
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBR0520LT1
Motorola
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
Boca Semiconductor
Hy Electronic
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
Tak Cheong Electronics Holdings
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
UPG139GV
Renesas Electronics
DPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Port Termination: REFLECTIVE;
HMC550ETR
Analog Devices' HMC550ETR is a GAAS SPST RF switch with 6 terminals, operating at up to 6000 MHz. It offers low insertion loss of 0.9 dB and min isolation of 8 dB. Ideal for RF/microwave applications requiring reflective port termination in temperatures ranging from -40°C to 85°C.
ADRF5250BCPZRL
Analog Devices' ADRF5250BCPZRL is a 50 ohm RF/Microwave Diversity Switch with 100-6000 MHz frequency range and 35 dBm CW power handling. Ideal for applications requiring high-frequency signal routing in environments ranging from -40 to 105°C.
UPG2176T5N-A
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Nominal On Time: .1 us;
HMC641LC4
HMC641LC4 by Analog Devices is a SP4T RF switch with 50 ohm impedance, offering 30 dB isolation and 3.5 dB insertion loss. It operates from 0 to 20000 MHz, handles up to 23.98 dBm CW power, and has a compact ceramic construction suitable for surface mount applications in RF/microwave systems.
UPG2179TB-A
SPDT; Minimum Operating Temperature: -45 Cel; JESD-609 Code: e6; Minimum Operating Frequency: 500 MHz; Maximum Insertion Loss: .6 dB; Construction: COMPONENT;
MA4SW510B-1
M/a-com Technology Solutions
SP5T; Maximum Operating Temperature: 125 Cel; Maximum Insertion Loss: 2.1 dB; Minimum Operating Temperature: -65 Cel; Maximum Input Power (CW): 30 dBm; Maximum Operating Frequency: 18000 MHz;
SPM3315
Onsemi's SPM3315 RF/Microwave Switch offers 1.5 VSWR, 29 dBm compression point, and 17 dB isolation. Ideal for SPDT applications up to 2500 MHz with a max insertion loss of 0.5 dB. Suitable for surface mount installations in temperature range -40 to 85 °C.
HMC1084LC4
Analog Devices' HMC1084LC4 is a SP4T RF switch with 50 ohm impedance, offering 21 dB isolation and 4.5 dB insertion loss. Operating from -55 to 85°C, it handles up to 30 dBm CW power in applications like microwave systems and communication equipment.
PE42482A-X
Psemi
PE42482A-X by Psemi is an RF/Microwave Switch with 33 dBm CW power, 1.12 VSWR, and 2.8 dB insertion loss. It's a SP8T device with CMOS technology, operating from 10 MHz to 8000 MHz. Ideal for applications requiring high-frequency switching in compact designs.
HMC276LP4ETR
Analog Devices' HMC276LP4ETR is a GAAS SPDT RF switch with 2 functions, 24 terminals, and max freq of 3000 MHz. It offers -40 to 85 °C temp range, 7 dB insertion loss, and 31 dB isolation. Ideal for RF/microwave applications requiring fast 0.35 us on time and high compression point of 26 dBm.
ADRF5345BCCZN-R7
Analog Devices' ADRF5345BCCZN-R7 is a SP4T RF/Microwave switch with 42.5 dBm CW power, 1.13 VSWR, and 1800-3800 MHz frequency range. Ideal for reflective port termination applications in components requiring 50 ohm impedance and surface mounting features.
F2912NCGI
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Power Supplies (V): 3.3; Maximum Voltage Standing Wave Ratio: 1.09;
HMC596LP4E
Analog Devices' HMC596LP4E is a RF/Microwave switch with max. input power of 23.01 dBm, insertion loss of 9 dB, and operating freq. range from 200 MHz to 3 GHz. Ideal for diversity switching applications due to its 50 ohm impedance and temp. range of -40°C to +85°C.
HMC545A
Analog Devices' HMC545A is an RF/Microwave switch with max input power of 34 dBm, 0.7 dB insertion loss, and operating frequency range of 0-3000 MHz. Ideal for diversity switching applications, it has a temp range of -40 to 85°C and characteristic impedance of 50 ohm.
HMC183QS24E
HMC183QS24E by Analog Devices is a RF/Microwave Switch with 29.03 dBm CW power, 1.8 dB max insertion loss, and 26 dB min isolation. It is ideal for diversity switch applications in the frequency range of 0-2000 MHz, offering high performance in surface mount construction.
HMC536LP2E
Analog Devices' HMC536LP2E is a RF/Microwave Switch with 1.3 dB max insertion loss, 23 dB min isolation, and 6000 MHz max operating frequency. Ideal for diversity switch applications in wireless systems due to its GaAs technology, 50 ohm impedance, and compact surface mount package.
MASWSS0180
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 0 MHz;
HMC944LC4
Analog Devices' HMC944LC4 is a SP4T RF/Microwave switch with 5 dB max insertion loss, handling up to 33.01 dBm CW power. Operating from -40°C to 85°C, it covers frequencies b/w 23-30 GHz. Ideal for high-frequency applications requiring reliable signal routing in a compact form factor.
HMC253LC4RTR
RF/Microwave Switches;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
HMC547ALC3
Analog Devices' HMC547ALC3 is a RF/Microwave Switch with max input power of 25 dBm, insertion loss of 3 dB, and operating frequency range from 0-28000 MHz. Ideal for diversity switch applications due to its 50 ohm impedance and wide temperature range (-40 to +85 °C).
HMC547ALP3ETR
HMC547ALP3ETR by Analog Devices is a RF/Microwave switch with max input power of 30 dBm, insertion loss of 3 dB, and operating frequency range from 0-20 GHz. It is ideal for diversity switching applications due to its 50 ohm impedance and wide temperature range (-40 to +85°C).
HMC544AETR
DIVERSITY SWITCH; Terminal Finish: Matte Tin (Sn) - annealed; Construction: COMPONENT; Maximum Insertion Loss: 1 dB; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3;
HMC545AETR
HMC545AETR by Analog Devices is a RF/Microwave switch with max input power of 34 dBm, insertion loss of 0.7 dB, and operating frequency range from 0-3000 MHz. It is ideal for diversity switching applications due to its 50 ohm impedance and wide temperature range (-40 to 85°C).
HMC547ALP3E
Analog Devices' HMC547ALP3E is a RF/Microwave Switch with 30 dBm CW power, 2.5 dB insertion loss, and 50 ohm impedance. It operates from -40 to 85 °C and covers frequencies from 0-20000 MHz. Ideal for diversity switch applications due to its high power handling and wide frequency range.
HMC544AE
DIVERSITY SWITCH; Maximum Input Power (CW): 39 dBm; Minimum Operating Temperature: -40 Cel; Maximum Insertion Loss: 1 dB; Maximum Operating Temperature: 85 Cel; Construction: COMPONENT;
HMC545AE
Analog Devices' HMC545AE is a RF/Microwave switch with max. input power of 34 dBm, 0.7 dB insertion loss, and 50 ohm impedance. Ideal for diversity switching applications in the frequency range of 0-3000 MHz, it operates b/w -40 to 85°C with matte tin finish.
DIVERSITY SWITCH; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 3000 MHz; Maximum Operating Temperature: 85 Cel; Minimum Operating Frequency: 0 MHz; Maximum Insertion Loss: .7 dB;
HMC544A
DIVERSITY SWITCH; Characteristic Impedance: 50 ohm; JESD-609 Code: e0; Maximum Insertion Loss: 1 dB; Maximum Input Power (CW): 39 dBm; Construction: COMPONENT;
HMC550AE
Hittite Microwave
DIVERSITY SWITCH; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel; Additional Features: CMOS COMPATIBLE; Maximum Operating Temperature: 85 Cel; Maximum Operating Frequency: 6000 MHz;
Analog Devices' HMC550AE is a RF/Microwave switch with max input power of 33.98 dBm, insertion loss of 0.9 dB, and operating frequency range from 0-6000 MHz. Ideal for applications requiring diversity switching in environments ranging from -40 to 85°C.
HMC595AE
DIVERSITY SWITCH; Construction: COMPONENT; Additional Features: CMOS COMPATIBLE; Maximum Operating Frequency: 3000 MHz; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 0 MHz;
HMC547LP3E
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Nominal On Time: .006 us; Characteristic Impedance: 50 ohm;
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Nominal On Time: .006 us; No. of Functions: 1;
HMC547LP3ETR
SPDT; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 20000 MHz; Additional Features: HIGH ISOLATION; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel;
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Compression Point (1 dB): 23 dBm; Nominal On Time: .006 us;
HMC545E
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Insertion Loss: .7 dB;
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Port Termination: REFLECTIVE;
HMC545ETR
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Characteristic Impedance: 50 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved