Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC545A is an RF/Microwave switch with max input power of 34 dBm, 0.7 dB insertion loss, and operating frequency range of 0-3000 MHz. Ideal for diversity switching applications, it has a temp range of -40 to 85°C and characteristic impedance of 50 ohm.
Median Price
$7.210
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Rochester
1+ parts
$4.540
100+ parts
$4.260
1k+ parts
$3.860
10k+ parts
-
Analog Devices Inc
$2.440
Mouser Electronics
$5.080
$4.390
DigiKey
$7.290
Verical
$4.443
Nova Conductors
$3.450
Digiode
$4.313
Vyrian
Sensible Micro Corp
Parana Technologies
$1.227
$1.141
IDEA Electronic Components Group
$1.319
$1.253
Corohmni
$1.560
DigiPath Technology Company
$2.058
$1.975
Aztec Data Supply Inc.
$2.810
Argo Parts USA
Netroflash
$3.278
$3.209
Ampacity Inc.
$3.780
Semicontronic
$3.686
$3.667
Corphita
$4.086
Continental Prestige Electronics
$5.120
$3.770
$2.710
AZTECH Wire
$11.381
Perfect Parts
High maximum input power allows for reliable and efficient operation without fear of damaging the switch with excessive power.
Being a component-based switch allows for flexibility in integration into various RF systems and setups.
Wide operating temperature range ensures the switch can function in a variety of environmental conditions.
Ability to operate at low temperatures makes this switch suitable for both indoor and outdoor applications.
Tin/Lead finish provides good solderability and conductivity for reliable connections.
Low insertion loss ensures minimal signal degradation when the switch is in use, leading to better overall performance.
Diversity switch allows for seamless switching between multiple RF signals, improving system reliability and performance.
Standard 50 ohm impedance ensures compatibility with a wide range of RF components and systems.
Ability to operate at 0 MHz allows for use in a variety of RF applications, including low-frequency signal switching.
Wide operating frequency range makes this switch suitable for use in a variety of RF and microwave applications.
RF/Microwave Switches HMC545A attributes and parameters. Explore more RF/Microwave Switches devices from Analog Devices
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Insertion Loss:
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
HMC545A RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
1N4148WT
Bytesonic Electronics
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
STM32H743ZIT6
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
1N4148
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Vishay Intertechnology
SW-111
M/a-com Technology Solutions
SW-111 by M/a-com Tech: RF/Microwave Switch with 1.5 VSWR, -55 to 85°C temp range, and 2 dB insertion loss. SPST type for 5-2000 MHz freq range, ideal for high-frequency signal routing in communication systems.
UPG2417T6M-E2-A
Renesas Electronics
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; No. of Functions: 1;
QPC8019QSR
Qorvo
Qorvo's QPC8019QSR is a SPDT RF switch with 1.1 dB max insertion loss, 14.5 dB min isolation, and 1.75 max VSWR. AEC-Q100 screened for automotive applications, it operates from -40 to 105°C with reflective port termination and supports frequencies from 617 MHz to 8 GHz.
NJG1681MD7-TE1
New Japan Radio
SPDT;
HMC104
Analog Devices
Analog Devices' HMC104 is a GAAS SPDT RF switch with -5V power supply, operating from -55°C to 125°C. It supports frequencies up to 6GHz and features absorptive port termination. Ideal for RF/microwave applications requiring high-frequency switching capabilities.
MASWSS0115TR-3000
Tyco Electronics M/a-com
SPDT; Maximum Operating Frequency: 3000 MHz; Maximum Operating Temperature: 85 Cel; Maximum Input Power (CW): 33.98 dBm; Minimum Operating Frequency: 0 MHz; Construction: COMPONENT;
HMC-C011
Analog Devices' HMC-C011 is a COAXIAL SPDT RF switch with 50 ohm impedance. It offers a max insertion loss of 4.9 dB and can handle up to 26.99 dBm CW power. Ideal for applications requiring high-frequency switching in environments ranging from -55°C to 85°C.
TGS2304-SCC
TGS2304-SCC by Texas Instruments is an SP4T RF switch with max input power of 33.01 dBm and VSWR of 1.2. Operating from 0-20000 MHz, it's ideal for RF/Microwave applications requiring high power handling and low insertion loss.
UPG2163T5N-A
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; No. of Functions: 1;
HMC322
Analog Devices' HMC322 is an RF/Microwave Switch with 26.02 dBm CW input power, 3.4 dB max insertion loss, and 18 dB min isolation. It operates from -40 to 85°C, uses GAAS tech, and has SP8T configuration for applications requiring high-frequency signal routing in the range of 0-10000 MHz.
MA4AGSW1A
M/a-com
SPST; Technology: GAAS; Maximum Operating Frequency: 50000 MHz; Power Supplies (V): -5; Package Equivalence Code: DIE OR CHIP; Maximum Operating Temperature: 125 Cel;
HMC544TR
Analog Devices' HMC544TR is a GAAS SPDT RF switch with 1dB max insertion loss, 8dB min isolation, and 36dBm compression point. Ideal for applications requiring high-frequency switching up to 4GHz in temperature range of -40 °C to 85°C. Package material: PLASTIC/EPOXY; Terminals: 6; On Time: 0.14us.
CMD196
Custom Mmic Design Services
SPDT; Maximum Operating Temperature: 85 Cel; Construction: COMPONENT; Maximum Insertion Loss: 2.5 dB; Minimum Operating Frequency: 0 MHz; Maximum Operating Frequency: 28000 MHz;
UPG139GV-E1
DPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -50 Cel;
UPG2158T5K-E2
TGS8630-XCC
TGS8630-XCC by Texas Instruments is an RF/Microwave SPDT switch with a max input power of 30 dBm and VSWR of 1.25. Operating from 0-12000 MHz, it's ideal for applications requiring high-frequency signal routing in components like amplifiers or transceivers.
UPG2009TB-E3-A
Nec Electronics America
SPDT; Minimum Operating Temperature: -45 Cel; Maximum Insertion Loss: .5 dB; Maximum Operating Temperature: 85 Cel; Minimum Operating Frequency: 500 MHz; JESD-609 Code: e6;
UPG2214TB-E4
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Input Power (CW): 30 dBm;
SPM3227
Onsemi's SPM3227 RF/Microwave Switch offers 1.5 VSWR, 15 dBm compression point, and 16 dB isolation. Ideal for SPDT applications up to 2500 MHz with a max insertion loss of 0.6 dB. Suitable for surface mount setups in temperature range -40 °C to 85°C.
HMC595TR
DIVERSITY SWITCH;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
HMC547ALC3
Analog Devices' HMC547ALC3 is a RF/Microwave Switch with max input power of 25 dBm, insertion loss of 3 dB, and operating frequency range from 0-28000 MHz. Ideal for diversity switch applications due to its 50 ohm impedance and wide temperature range (-40 to +85 °C).
HMC547ALP3ETR
HMC547ALP3ETR by Analog Devices is a RF/Microwave switch with max input power of 30 dBm, insertion loss of 3 dB, and operating frequency range from 0-20 GHz. It is ideal for diversity switching applications due to its 50 ohm impedance and wide temperature range (-40 to +85°C).
HMC544AETR
DIVERSITY SWITCH; Terminal Finish: Matte Tin (Sn) - annealed; Construction: COMPONENT; Maximum Insertion Loss: 1 dB; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3;
HMC545AETR
HMC545AETR by Analog Devices is a RF/Microwave switch with max input power of 34 dBm, insertion loss of 0.7 dB, and operating frequency range from 0-3000 MHz. It is ideal for diversity switching applications due to its 50 ohm impedance and wide temperature range (-40 to 85°C).
HMC547ALP3E
Analog Devices' HMC547ALP3E is a RF/Microwave Switch with 30 dBm CW power, 2.5 dB insertion loss, and 50 ohm impedance. It operates from -40 to 85 °C and covers frequencies from 0-20000 MHz. Ideal for diversity switch applications due to its high power handling and wide frequency range.
HMC544AE
DIVERSITY SWITCH; Maximum Input Power (CW): 39 dBm; Minimum Operating Temperature: -40 Cel; Maximum Insertion Loss: 1 dB; Maximum Operating Temperature: 85 Cel; Construction: COMPONENT;
HMC545AE
Analog Devices' HMC545AE is a RF/Microwave switch with max. input power of 34 dBm, 0.7 dB insertion loss, and 50 ohm impedance. Ideal for diversity switching applications in the frequency range of 0-3000 MHz, it operates b/w -40 to 85°C with matte tin finish.
HMC544A
DIVERSITY SWITCH; Characteristic Impedance: 50 ohm; JESD-609 Code: e0; Maximum Insertion Loss: 1 dB; Maximum Input Power (CW): 39 dBm; Construction: COMPONENT;
HMC550AE
Hittite Microwave
DIVERSITY SWITCH; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel; Additional Features: CMOS COMPATIBLE; Maximum Operating Temperature: 85 Cel; Maximum Operating Frequency: 6000 MHz;
Analog Devices' HMC550AE is a RF/Microwave switch with max input power of 33.98 dBm, insertion loss of 0.9 dB, and operating frequency range from 0-6000 MHz. Ideal for applications requiring diversity switching in environments ranging from -40 to 85°C.
HMC595AE
DIVERSITY SWITCH; Construction: COMPONENT; Additional Features: CMOS COMPATIBLE; Maximum Operating Frequency: 3000 MHz; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 0 MHz;
HMC547LP3E
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Nominal On Time: .006 us; Characteristic Impedance: 50 ohm;
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Nominal On Time: .006 us; No. of Functions: 1;
HMC547LP3ETR
SPDT; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 20000 MHz; Additional Features: HIGH ISOLATION; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel;
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Compression Point (1 dB): 23 dBm; Nominal On Time: .006 us;
HMC545E
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Insertion Loss: .7 dB;
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Port Termination: REFLECTIVE;
HMC545ETR
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Characteristic Impedance: 50 ohm;
HMC547LP3
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Minimum Operating Frequency: 0 MHz; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved