Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC535LP4ETR is a VCO with 590 MHz/V modulation sensitivity, -110 dBc/Hz phase noise, and 6 dBm output power. Ideal for applications requiring precise frequency control in the 14.7-15.4 GHz range, such as radar systems and satellite communications.
Median Price
$128.730
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Rochester
1+ parts
100+ parts
$121.010
1k+ parts
$113.280
10k+ parts
-
Digiode
$123.472
Vyrian
$129.970
Parana Technologies
$2.802
$2.606
IDEA Electronic Components Group
$3.013
$2.862
DigiPath Technology Company
$4.700
$4.512
Vigor
$108.900
Semicontronic
$110.470
$107.708
$107.156
Ampacity Inc.
Corphita
$116.973
Component Stockers USA
$131.070
$123.200
QUARKTWIN TECHNOLOGY LTD
PLASTIC/EPOXY material provides good durability and resistance to environmental factors, making the product reliable for long-term use.
With a maximum supply voltage of 5.25V, this VCO can operate efficiently and reliably within a safe voltage range.
BIPOLAR technology ensures stable and accurate frequency control, making it suitable for various applications requiring precise oscillation.
High modulation sensitivity allows for fine-tuning of frequencies, providing flexibility and precision in signal generation.
Low maximum supply current consumption of 340mA reduces power consumption and heat generation, enhancing overall efficiency.
With an output power of 6 dBm, this VCO delivers a strong and reliable signal for various RF applications.
Stable nominal supply voltage of 5V ensures consistent performance and reliability in operation.
Low phase noise of -110 dBc/Hz results in cleaner and more accurate frequency signals, suitable for high-performance communication systems.
Compatibility with power supplies of 5V and 12V makes it versatile and adaptable for use in different systems and configurations.
Being a VCO, this oscillator offers precise control over frequency output, making it ideal for frequency modulation and tuning applications.
Having 24 terminals allows for intricate connectivity and functionality, enabling advanced control and modulation capabilities.
Compact size of 4.1mm x 4.1mm x 1.0mm makes it suitable for space-constrained applications while maintaining high performance.
With a minimum supply voltage of 4.75V, the VCO can still operate effectively under lower voltage conditions, ensuring reliable performance.
High maximum operating temperature of 85 °C allows for operation in various environmental conditions without compromising performance.
The ability to operate at a minimum control voltage of 0V provides flexibility in modulation and frequency adjustment for different applications.
Low minimum operating temperature of -40 °C enables reliable performance even in extreme cold environments.
MATTE TIN terminal finish ensures good conductivity and solderability, enhancing the overall durability and reliability of the VCO.
High nominal operating frequency of 15400 MHz allows for high-speed signal generation and processing in various RF systems.
With a maximum control voltage of 13V, precise frequency control and modulation can be achieved for different applications.
The offset frequency of 100 kHz provides additional flexibility in tuning and modulating the output frequency as needed.
Low minimum operating frequency of 14700 MHz allows for a wide frequency range coverage, making it versatile for various signal processing needs.
SURFACE mounting feature offers easy and convenient installation in modern circuit board designs, saving space and simplifying assembly.
With a high maximum operating frequency of 15400 MHz, the VCO can handle high-speed signal processing and modulation requirements efficiently.
VCO Voltage Controlled Oscillators HMC535LP4ETR attributes and parameters. Explore more VCO Voltage Controlled Oscillators devices from Analog Devices
Additional Features:
Maximum Control Voltage:
Minimum Control Voltage:
JESD-609 Code:
Modulation Sensitivity:
Mounting Feature:
No. of Terminals:
Offset Frequency:
Maximum Operating Frequency:
Minimum Operating Frequency:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Power:
Package Body Material:
Package Equivalence Code:
Phase Noise:
Physical Dimension:
Power Supplies (V):
Qualification:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Technology:
Terminal Finish:
HMC535LP4ETR Oscillators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
EU2B-YS3203F
Idec
ROTARY SWITCH;
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Itt Semiconductor
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
Onsemi
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
SPC TECHNOLOGY/ MULTICOMP
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SN74LS626JP4
Texas Instruments
SN74LS626JP4 by Texas Instruments is a TTL VCO with 5V supply, operating from 0 to 70°C. It features a voltage-controlled oscillator type and through-hole mounting. Ideal for applications requiring precise frequency control in electronic circuits.
HMC531LP5TR
Hittite Microwave
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Control Voltage: 2 V; Maximum Control Voltage: 13 V;
LTC6992HS6-4#TRMPBF
Analog Devices
LTC6992HS6-4#TRMPBF by Analog Devices is a VCO with max supply voltage of 5.5V, operating freq range from 0.00000318 MHz to 1 MHz, and temp range of -40°C to 125°C. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
MAX2752EUA+
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; Maximum Control Voltage: 2.4 V; Offset Frequency: 4000 kHz; Minimum Operating Frequency: 2025 MHz; Maximum Operating Frequency: 2165 MHz;
LTC6992IDCB-1#TRPBF
LTC6992IDCB-1#TRPBF by Analog Devices is a VCO with max supply voltage of 5.5V, operating freq range from 0.00000318 MHz to 1 MHz. It's used in applications requiring voltage-controlled oscillators in compact surface mount packages.
HMC358MS8GE
Analog Devices' HMC358MS8GE is a VCO with 6800 MHz operating frequency, -110 dBc/Hz phase noise, and 8 dBm output power. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
HMC1166LP5ETR
Analog Devices' HMC1166LP5ETR is a VCO with 325 MHz/V modulation sensitivity, 11 dBm output power, and 10 dBc/Hz phase noise. Ideal for applications requiring precise frequency control in the range of 11410-12620 MHz, such as wireless communication systems.
LTC6992CS6-3#TRMPBF
LTC6992CS6-3#TRMPBF by Analog Devices is a VCO with max supply voltage of 5.5V, operating freq range from 0.00000318 MHz to 1 MHz. It's a compact (2.9mm x 1.75mm x 1.0mm) surface mount device ideal for applications requiring precise voltage-controlled oscillation in limited space environments.
LTC6992CS6-1#TRPBF
LTC6992CS6-1#TRPBF by Analog Devices is a VCO with max supply voltage of 5.5V, operating freq range from 0.00000318 MHz to 1 MHz. Ideal for applications requiring precise voltage-controlled oscillation in compact designs.
HMC582LP5ETR
Analog Devices' HMC582LP5ETR is a VCO with 32 terminals, operating from 11.1 GHz to 12.4 GHz. It features -110 dBc/Hz phase noise, output power of 5 dBm, and operates at supply voltages b/w 4.75V to 5.25V. Ideal for applications requiring precise frequency control in RF systems.
HMC584LP5ETR
Analog Devices' HMC584LP5ETR is a VCO with 13900 MHz nominal frequency, -110 dBc/Hz phase noise, and 7 dBm output power. It operates b/w -40 to 85 °C and requires 4.75-5.25 V supply voltage for applications like RF communication systems.
HMC8364LP6GETR
Analog Devices' HMC8364LP6GETR is a VCO with 5.25V max supply voltage, 267 MHz/V modulation sensitivity, and -66 dBc/Hz phase noise. Ideal for applications requiring a compact 40-terminal VCO operating b/w 18.1 GHz to 26.6 GHz with surface mounting feature.
LTC6990CS6#PBF
LTC6990CS6#PBF by Analog Devices is a VCO with 6 terminals, operating from 2.25V to 5.5V, consuming 0.283mA max current. It offers a frequency range of 0.000488MHz to 2MHz and is ideal for digital tuned oscillator applications in various electronic devices.
LTC6992IS6-4#WTRMPBF
LTC6992IS6-4#WTRMPBF by Analog Devices is a VCO with 6 terminals, operating freq. range of 0.00000318MHz to 1MHz. It has a supply voltage range of 2.25V to 5.5V and temp. range of -40 °C to 85°C, making it suitable for applications requiring precise voltage-controlled oscillation in compact designs.
LTC6992HDCB-2#TRMPBF
LTC6992HDCB-2#TRMPBF by Analog Devices is a VCO with 6 terminals, operating from -40 to 125 °C. It has a supply voltage range of 2.25V to 5.5V and control voltage range of 0.1V to 0.9V, making it suitable for applications requiring precise frequency control in compact designs.
SN74LS624DE4
VOLTAGE CONTROLLED OSCILLATOR; Terminal Finish: NICKEL PALLADIUM GOLD;
MAX2754EUA
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Maximum Operating Temperature: 85 Cel; Maximum Supply Current: 20 mA; Phase Noise: -137 dBc/Hz;
LTC6992IS6-3#TRPBF
LTC6992IS6-3#TRPBF by Analog Devices is a VCO with 6 terminals, operating freq. range of 0.00000318MHz to 1MHz. It has a supply voltage range of 2.25V to 5.5V and control voltage range of 0.1V to 0.9V, making it suitable for applications requiring precise frequency control in compact designs like IoT devices.
HMC509LP5E
Analog Devices' HMC509LP5E is a VCO with 32 terminals, operating at frequencies from 7.8 GHz to 8.8 GHz. It features a max output power of 10 dBm and phase noise of -115 dBc/Hz, making it ideal for applications requiring precise frequency control in RF systems. With a compact size of 5.1mm x 5.1mm x 1.0mm and surface mounting feature, it offers flexibility in various space-constrained designs while maintaining high performance standards.
VCO190-2450AT(Y)
Sirenza Microdevices
VOLTAGE CONTROLLED OSCILLATOR; Minimum Operating Temperature: -35 Cel; Nominal Supply Voltage: 4.5 V; Modulation Sensitivity: 65 MHz/V; Minimum Supply Voltage: 4.25 V; Maximum Supply Voltage: 4.75 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
HMC511LP5ETR
HMC511LP5ETR by Analog Devices is a VCO with 32 terminals, operating at frequencies b/w 9050-10150 MHz. It features a GaAs technology, -115 dBc/Hz phase noise, and 9 dBm output power. Ideal for applications requiring precise frequency control in communication systems.
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 10150 MHz; Phase Noise: -115 dBc/Hz;
HMC530LP5E
Analog Devices' HMC530LP5E is a VCO with 32 terminals, operating b/w 9.5-10.8 GHz, offering -110 dBc/Hz phase noise at 100 kHz offset frequency. It requires 4.75-5.25V supply voltage and supports control voltages from 2-12V, making it ideal for applications requiring precise frequency control in RF systems.
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Offset Frequency: 100 kHz; Terminal Finish: Matte Tin (Sn); Minimum Operating Frequency: 9500 MHz;
HMC509LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Physical Dimension: 5.1mm x 5.1mm x 1.0mm; Maximum Supply Current: 270 mA; JESD-609 Code: e3;
Analog Devices' HMC509LP5ETR is a VCO with 10 dBm output power, -115 dBc/Hz phase noise, and operates b/w 7800-8800 MHz. It has a max supply voltage of 5.25 V and current of 270 mA. Ideal for applications requiring precise frequency control in compact designs.
HMC511LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Maximum Operating Temperature: 85 Cel; Minimum Control Voltage: 2 V; Offset Frequency: 100 kHz;
HMC511LP5E by Analog Devices is a VCO with 32 terminals, operating at frequencies b/w 9050-10150 MHz. It features a GaAs technology, -115 dBc/Hz phase noise, and 9 dBm output power. Ideal for applications requiring precise frequency control in temperature ranges from -40 to 85°C.
HMC534LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Physical Dimension: 5.1mm x 5.1mm x 1.0mm; Output Power: 9 dBm; Minimum Operating Temperature: -40 Cel;
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Phase Noise: -110 dBc/Hz; Maximum Operating Temperature: 85 Cel; Offset Frequency: 100 kHz;
HMC512LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Output Power: 3 dBm; Physical Dimension: 5.1mm x 5.1mm x 1.0mm; Additional Features: TAPE AND REEL;
Analog Devices' HMC512LP5ETR is a VCO with 32 terminals, operating at frequencies b/w 9.6-10.8 GHz. It features -110 dBc/Hz phase noise, 3 dBm output power, and operates on a 5V supply voltage. Ideal for applications requiring precise frequency control in communication systems or radar equipment.
HMC533LP4ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Phase Noise: -95 dBc/Hz; Maximum Operating Temperature: 85 Cel; Minimum Operating Frequency: 23800 MHz;
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Terminal Finish: MATTE TIN; Output Power: 9 dBm; Maximum Operating Frequency: 24800 MHz;
HMC510LP5ETR
Analog Devices' HMC510LP5ETR is a VCO with 10 dBm output power, -116 dBc/Hz phase noise, and operates b/w 8450-9550 MHz. Ideal for applications requiring precise frequency control in compact designs.
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Operating Frequency: 8450 MHz; Maximum Supply Current: 360 mA; Output Power: 10 dBm;
HMC529LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Maximum Control Voltage: 13 V; Minimum Operating Temperature: -40 Cel; Maximum Supply Voltage: 5.25 V;
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Maximum Operating Frequency: 13400 MHz; JESD-609 Code: e3; Minimum Control Voltage: 2 V;
HMC533LP4E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Maximum Supply Voltage: 5.25 V; Maximum Control Voltage: 13 V; Output Power: 9 dBm;
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Output Power: 9 dBm; Package Equivalence Code: LCC24,.16SQ,20; Maximum Supply Current: 260 mA;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved