Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Output Power: 3 dBm; Physical Dimension: 5.1mm x 5.1mm x 1.0mm; Additional Features: TAPE AND REEL;
Median Price
$51.180
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Farnell
1+ parts
$30.750
100+ parts
$24.720
1k+ parts
-
10k+ parts
Chip1Stop
$31.800
Arrow
$42.220
Verical
Mouser Electronics
$41.890
$40.110
DigiKey
$51.330
Analog Devices Inc
$24.410
Newark
$58.000
$54.280
Element14
$80.940
$52.610
$48.850
Digiode
$21.071
Nova Conductors
$38.115
Vyrian
Parana Technologies
$0.618
$0.575
IDEA Electronic Components Group
$0.665
$0.632
DigiPath Technology Company
$1.037
$0.996
Aztec Data Supply Inc.
$2.851
Corphita
$19.962
Semicontronic
$26.550
$25.886
$25.754
Corohmni
$38.671
Continental Prestige Electronics
$39.500
$29.890
Authorized Procurement Solutions
Lixinc
Argo Parts USA
Netroflash
$37.353
$36.209
$35.447
Futuretech Components
RC Electronics
$71.070
$64.490
$62.210
VCO Voltage Controlled Oscillators HMC512LP5ETR attributes and parameters. Explore more VCO Voltage Controlled Oscillators devices from Hittite Microwave
Additional Features:
Maximum Control Voltage:
Minimum Control Voltage:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Offset Frequency:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Power:
Phase Noise:
Physical Dimension:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Terminal Finish:
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Crimson Semiconductor
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
Changzhou Starsea Electronics
New Jersey Semiconductor Products
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
MBR0540T1G
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
HMC582LP5ETR
Analog Devices
Analog Devices' HMC582LP5ETR is a VCO with 32 terminals, operating from 11.1 GHz to 12.4 GHz. It features -110 dBc/Hz phase noise, output power of 5 dBm, and operates at supply voltages b/w 4.75V to 5.25V. Ideal for applications requiring precise frequency control in RF systems.
HMC1161LP5E
Analog Devices' HMC1161LP5E is a VCO with 5.25V max supply voltage, 250 MHz/V modulation sensitivity, and 300mA max supply current. Ideal for applications requiring a compact VCO with -90 dBc/Hz phase noise, operating b/w 8710-9550MHz in surface mount setups.
SN54LS324J-00
Texas Instruments
VOLTAGE CONTROLLED OSCILLATOR;
MAOC-009265-TR0500
TE Connectivity
TE Connectivity's MAOC-009265-TR0500 VCO offers 6 dBm output power, -85 dBc/Hz phase noise, and operates b/w 9400 MHz to 10800 MHz. Ideal for applications requiring a compact 5.0mm x 5.0mm x 0.9mm form factor with a voltage-controlled oscillator design and surface mounting feature.
LTC6990CS6#TRMPBF
LTC6990CS6#TRMPBF by Analog Devices is a VCO with max supply voltage of 5.5V and current of 0.283mA. It operates b/w 0-70°C, with min freq of 0.000488MHz and max freq of 2MHz. Ideal for applications requiring digital tuned oscillators in compact designs.
TLC2940IPWR
TLC2940IPWR by Texas Instruments is a VCO with max supply voltage of 3.15V, operating freq of 50MHz, and CMOS technology. Ideal for applications requiring voltage-controlled oscillators in compact designs due to its small physical dimensions and surface mounting feature.
VTO-8950
Broadcom
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; Minimum Control Voltage: 3 V; Power Variation: 1.5 dB; Output Power: 10 dBm; Maximum Operating Temperature: 65 Cel;
HMC586LC4BTR
Hittite Microwave
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Maximum Operating Frequency: 8000 MHz; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 4000 MHz;
HMC385LP4ETR
Analog Devices' HMC385LP4ETR is a VCO with 24 terminals, operating from 2250 MHz to 2500 MHz. It offers -115 dBc/Hz phase noise and 4.5 dBm output power, suitable for applications requiring precise frequency control in the range of -40°C to 85°C. The device comes in a compact 4.1mm x 4.1mm x 1.0mm plastic/epoxy package for surface mount assembly.
SN54LS626J
SN54LS626J by Texas Instruments is a VCO with 16 terminals, operating at frequencies from 1 MHz to 20 MHz. It has a supply voltage range of 4.5V to 5.5V and consumes up to 55mA. Ideal for applications requiring precise voltage-controlled oscillation in temperature ranges from -55°C to 125°C.
HMC514LP5ETR
Analog Devices' HMC514LP5ETR is a VCO with 3.25V max supply voltage, 290mA max supply current, and 5dBm output power. Ideal for applications requiring precise frequency control in the range of 11.17-12.02GHz, such as radar systems and communication equipment.
SN54LS325W-00
HTO-12000
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: CHASSIS MOUNT; Minimum Operating Temperature: -54 Cel; Maximum Operating Frequency: 18000 MHz; Power Variation: 2.5 dB; Minimum Control Voltage: 1 V;
MTO-8002
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Phase Noise: -109 dBc/Hz; Physical Dimension: 12.7mm x 5.08mm; Nominal Supply Voltage: 15 V;
ADF5509BCPZ-U2
ADF5509BCPZ-U2 by Analog Devices is a VCO with 32 terminals, operating at frequencies b/w 7800-8800 MHz. It uses bipolar technology and requires power supplies of 3/5V. This voltage-controlled oscillator is ideal for applications requiring precise frequency control in temperature ranges from -40 to 85°C.
LTC6992CDCB-3#TRPBF
LTC6992CDCB-3#TRPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a voltage control range of 0.1V to 0.9V and operates b/w -40°C to +70°C. This compact device in PLASTIC/EPOXY package is ideal for applications requiring precise voltage-controlled oscillation.
MAX2622EUA-T
Maxim Integrated
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; Output Power: -8 dBm; Maximum Control Voltage: 2.4 V; Offset Frequency: 100 kHz; Maximum Operating Frequency: 881 MHz;
MAX2752EUA+T
Analog Devices' MAX2752EUA+T is a VCO with Mod Sensitivity of 170 MHz/V, Phase Noise of -125 dBc/Hz, and Output Power of -3 dBm. Ideal for applications requiring precise frequency control in the range of 2025-2165 MHz, such as wireless communication systems.
LTC6992HS6-1#TRPBF
LTC6992HS6-1#TRPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a supply voltage range of 2.25V to 5.5V and consumes only 0.45mA max current, suitable for applications requiring precise voltage-controlled oscillation in compact designs.
HMC632LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn); Maximum Supply Current: 400 mA;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HMC511LP5ETR
HMC511LP5ETR by Analog Devices is a VCO with 32 terminals, operating at frequencies b/w 9050-10150 MHz. It features a GaAs technology, -115 dBc/Hz phase noise, and 9 dBm output power. Ideal for applications requiring precise frequency control in communication systems.
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 10150 MHz; Phase Noise: -115 dBc/Hz;
HMC530LP5E
Analog Devices' HMC530LP5E is a VCO with 32 terminals, operating b/w 9.5-10.8 GHz, offering -110 dBc/Hz phase noise at 100 kHz offset frequency. It requires 4.75-5.25V supply voltage and supports control voltages from 2-12V, making it ideal for applications requiring precise frequency control in RF systems.
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Offset Frequency: 100 kHz; Terminal Finish: Matte Tin (Sn); Minimum Operating Frequency: 9500 MHz;
HMC509LP5ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Physical Dimension: 5.1mm x 5.1mm x 1.0mm; Maximum Supply Current: 270 mA; JESD-609 Code: e3;
Analog Devices' HMC509LP5ETR is a VCO with 10 dBm output power, -115 dBc/Hz phase noise, and operates b/w 7800-8800 MHz. It has a max supply voltage of 5.25 V and current of 270 mA. Ideal for applications requiring precise frequency control in compact designs.
HMC511LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Maximum Operating Temperature: 85 Cel; Minimum Control Voltage: 2 V; Offset Frequency: 100 kHz;
HMC511LP5E by Analog Devices is a VCO with 32 terminals, operating at frequencies b/w 9050-10150 MHz. It features a GaAs technology, -115 dBc/Hz phase noise, and 9 dBm output power. Ideal for applications requiring precise frequency control in temperature ranges from -40 to 85°C.
HMC534LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Physical Dimension: 5.1mm x 5.1mm x 1.0mm; Output Power: 9 dBm; Minimum Operating Temperature: -40 Cel;
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Phase Noise: -110 dBc/Hz; Maximum Operating Temperature: 85 Cel; Offset Frequency: 100 kHz;
HMC512LP5ETR
Analog Devices' HMC512LP5ETR is a VCO with 32 terminals, operating at frequencies b/w 9.6-10.8 GHz. It features -110 dBc/Hz phase noise, 3 dBm output power, and operates on a 5V supply voltage. Ideal for applications requiring precise frequency control in communication systems or radar equipment.
HMC533LP4ETR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Phase Noise: -95 dBc/Hz; Maximum Operating Temperature: 85 Cel; Minimum Operating Frequency: 23800 MHz;
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Terminal Finish: MATTE TIN; Output Power: 9 dBm; Maximum Operating Frequency: 24800 MHz;
HMC510LP5ETR
Analog Devices' HMC510LP5ETR is a VCO with 10 dBm output power, -116 dBc/Hz phase noise, and operates b/w 8450-9550 MHz. Ideal for applications requiring precise frequency control in compact designs.
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Operating Frequency: 8450 MHz; Maximum Supply Current: 360 mA; Output Power: 10 dBm;
HMC529LP5E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Maximum Control Voltage: 13 V; Minimum Operating Temperature: -40 Cel; Maximum Supply Voltage: 5.25 V;
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Maximum Operating Frequency: 13400 MHz; JESD-609 Code: e3; Minimum Control Voltage: 2 V;
HMC533LP4E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Maximum Supply Voltage: 5.25 V; Maximum Control Voltage: 13 V; Output Power: 9 dBm;
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Output Power: 9 dBm; Package Equivalence Code: LCC24,.16SQ,20; Maximum Supply Current: 260 mA;
HMC512LP5TR
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Supply Current: 370 mA; Minimum Operating Frequency: 9600 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved