Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC522LC4RTR is a GAAS RF/Microwave Mixer with 24 terminals in a ceramic package. It operates b/w -55°C to 85°C, suitable for surface mount applications in various communication systems and radar equipment.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Parana Technologies
$2.705
$2.516
IDEA Electronic Components Group
$2.909
$2.764
AZTECH Wire
$3.650
$3.510
$3.440
$3.370
DigiPath Technology Company
$4.538
$4.357
One Stop Electronics
$12.000
Ampacity Inc.
$13.000
Semicontronic
$32.000
$31.200
$31.040
Corphita
Ceramic is known for its excellent thermal conductivity, helping to dissipate heat effectively and ensuring stable performance at high temperatures.
Having 24 terminals allows for versatile connectivity options, enabling the mixer to be integrated efficiently into various RF systems.
With a high maximum operating temperature, this mixer can withstand demanding applications without compromising on performance or reliability.
The low minimum operating temperature ensures that the mixer can operate reliably even in environments with extreme cold conditions.
Gallium Arsenide (GaAs) technology offers high frequency capabilities, low noise performance, and efficient power handling, making this mixer ideal for RF/microwave applications.
The surface mount feature makes installation quick and easy, saving time and effort during the integration process.
RF/Microwave Mixers HMC522LC4RTR attributes and parameters. Explore more RF/Microwave Mixers devices from Analog Devices
Mounting Feature:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Sub-Category:
Technology:
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
CRCW04020000Z0EDHP
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
STMicroelectronics
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
HMC485AMS8GE
Analog Devices
Analog Devices' HMC485AMS8GE is a GaAs RF mixer with 27 dBm CW input power, 11 dB conversion loss, and 1700-2400 MHz frequency range. Ideal for RF applications requiring single balanced mixers in plastic/epoxy package for surface mounting.
LTC5577IUF#PBF
Linear Technology
DOUBLE BALANCED; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
LTC5549IUDB#TRMPBF
LTC5549IUDB#TRMPBF by Analog Devices is a RF/Microwave Mixer with 20 dBm CW input power, operating from -40 to 105 °C. It features double balanced design, 50 ohm impedance, and operates b/w 2-14 GHz. Ideal for high-frequency applications in communications and radar systems.
LRMS-1MH
Mini-circuits
LRMS-1MH by Mini-circuits is a ceramic RF mixer with 6 terminals. It operates from 2 MHz to 500 MHz, offering a max conversion loss of 8 dB and handling up to 23 dBm CW input power. Ideal for double balanced RF/microwave applications, it has a VSWR of 1.96 and can be surface mounted for ease of installation in various systems.
UPC2753GR-E2
Renesas Electronics
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Terminal Finish: Tin/Lead (Sn/Pb);
CM-3
Vari-l
DOUBLE BALANCED;
HMC620LC4
HMC620LC4 by Analog Devices is a RF/Microwave Mixer with 50 ohm impedance, 9 dB conversion loss, and 3000-7000 MHz frequency range. It can handle up to 20 dBm CW input power and operates b/w -55 to 85 °C. Ideal for applications requiring double balanced mixers in high-frequency circuits.
LRMS-30J
LRMS-30J by Mini-circuits is a ceramic RF mixer with 6 terminals. It operates from -40 to 85°C, suitable for applications requiring double balanced mixers. With a frequency range of 200 MHz to 3 GHz and low conversion loss of 9.8 dB, it can handle up to 17 dBm input power.
ADL5811XCPZ-R7
ADL5811XCPZ-R7 by Analog Devices is a BICMOS RF/Microwave Mixer with 32 terminals, operating temperature range of -40 to 85°C. It requires a 5V power supply and comes in a surface mount package. Ideal for applications requiring high-frequency signal mixing in various electronic systems.
HMC523LC4
HMC523LC4 by Analog Devices is a RF/Microwave Mixer with 24 terminals, operating from -55 to 85°C. It features GaAs technology, 50 ohm impedance, and offers image rejection. With a frequency range of 15-23 GHz and max conversion loss of 13 dB, it's ideal for surface mount applications requiring high input power handling up to 20 dBm.
LTC5552IUDB#TRMPBF
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: LCC12,.08X.12,20; Maximum Supply Current: 150 mA;
MCA1-12GL+
MCA1-12GL+ by Mini-circuits is a RF/Microwave Mixer with max input power of 17 dBm, VSWR of 4.18, and conversion loss of 9.2 dB. Ideal for applications requiring double balanced mixers in the frequency range of 3.8 GHz to 12 GHz, with operating temperatures from -55°C to 100°C.
HMC351S8RTR
Analog Devices' HMC351S8RTR is an RF/Microwave Mixer with 8 terminals, operating b/w -40°C to 85°C. Built with GaAs technology, it features a plastic/epoxy package for surface mount applications in various electronic systems.
HMC170C8TR
DOUBLE BALANCED; JESD-609 Code: e4; Terminal Finish: GOLD OVER NICKEL;
HMC622LP4ETR
Analog Devices' HMC622LP4ETR is a GAAS RF/Microwave Mixer with 24 terminals, operating from -40 to 85 °C. It requires a 5V power supply and draws a max current of 220mA. Ideal for surface mount applications, it is a double balanced device suitable for various RF and microwave systems.
HMC220BMS8GETR
Analog Devices' HMC220BMS8GETR is a RF/Microwave Mixer with 25 dBm CW input power, 85°C max temp, and 50 ohm impedance. Ideal for applications requiring double balanced mixers in the frequency range of 5-12 GHz.
HMC214MS8ETR
Analog Devices' HMC214MS8ETR is a GAAS RF/Microwave Mixer with 8 terminals, operating from 2400-4000 MHz. It offers a max input power of 27 dBm and conversion loss of 12 dB. Ideal for applications requiring double balanced mixers in the temperature range of -40 to 85 °C.
HMC144
Analog Devices' HMC144 RF/Microwave Mixer offers 15 dBm CW input power, 85°C max temp, and 50 ohm impedance. Ideal for applications requiring double balanced technology, with frequency range of 5-20 GHz.
AMMP-6546
Broadcom
TRIPLE BALANCED;
HMC329LM3
Analog Devices' HMC329LM3 is a RF/Microwave Mixer with 50 ohm impedance, operating from 26-40 GHz. Featuring double balanced design, it offers max input power of 13 dBm and conversion loss of 11 dB. Ideal for high-frequency applications requiring precise signal mixing in temperatures ranging from -40 to +85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
HMC560ALM3TR
DOUBLE BALANCED; Maximum Operating Frequency: 38000 MHz; Maximum Conversion Loss: 15 dB; Minimum Operating Temperature: -40 Cel; Maximum Input Power (CW): 25 dBm; Characteristic Impedance: 50 ohm;
HMC560ALM3
DOUBLE BALANCED; Construction: COMPONENT; Maximum Input Power (CW): 25 dBm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Conversion Loss: 15 dB;
HMC558ALC3BTR
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: CERAMIC; Maximum Conversion Loss: 9.5 dB; Characteristic Impedance: 50 ohm;
HMC520ALC4
IMAGE REJECTION; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC520ALC4TR
IMAGE REJECTION; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Minimum Operating Frequency: 6000 MHz;
HMC521ALC4TR
IMAGE REJECTION; Construction: COMPONENT; Maximum Operating Frequency: 13500 MHz; Minimum Operating Temperature: -40 Cel; Maximum Input Power (CW): 20 dBm; Minimum Operating Frequency: 8500 MHz;
HMC521ALC4TR-R5
IMAGE REJECTION; Construction: COMPONENT; Maximum Conversion Loss: 9.5 dB; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 13500 MHz; Characteristic Impedance: 50 ohm;
HMC525LC4TR
Hittite Microwave
IMAGE REJECTION; Maximum Input Power (CW): 20 dBm; Maximum Conversion Loss: 11 dB; Maximum Operating Frequency: 8500 MHz; Maximum Operating Temperature: 85 Cel; Characteristic Impedance: 50 ohm;
IMAGE REJECTION; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Maximum Operating Temperature: 85 Cel; Characteristic Impedance: 50 ohm;
HMC521ALC4
HMC521ALC4 by Analog Devices is an RF/Microwave Mixer with a max input power of 20 dBm, operating from -40 to 85°C. It features image rejection type with 50 ohm impedance, conversion loss of 9.5 dB, and operates b/w 8.5-13.5 GHz. Ideal for applications requiring high-frequency mixing in various electronic systems.
HMC521LC4TR
IMAGE REJECTION; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Minimum Operating Temperature: -55 Cel;
HMC557ALC4
Analog Devices' HMC557ALC4 is a GAAS double balanced RF/Microwave Mixer with 24 terminals. It operates b/w -40°C to 85°C, featuring a ceramic package and W/Ni/Au terminal finish. Ideal for surface mount applications in various RF and microwave systems.
HMC558ALC3BTR-R5
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: CERAMIC; Construction: COMPONENT; Minimum Operating Frequency: 5500 MHz;
HMC520ALC4TR-R5
IMAGE REJECTION; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Characteristic Impedance: 50 ohm;
HMC521LC4
IMAGE REJECTION; JESD-609 Code: e4; Maximum Conversion Loss: 10 dB; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -55 Cel; Maximum Input Power (CW): 20 dBm;
IMAGE REJECTION; JESD-609 Code: e4; Minimum Operating Temperature: -55 Cel; Maximum Operating Frequency: 13500 MHz; Characteristic Impedance: 50 ohm; Additional Features: I/P POWER-MAX (PEAK)=23DBM;
HMC553AG-SX
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 7; Technology: GAAS; Maximum Operating Temperature: 85 Cel; Maximum Conversion Loss: 10 dB;
HMC560A-SX
HMC521A-SX
IMAGE REJECTION; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 20 dBm; Maximum Operating Frequency: 13500 MHz; Minimum Operating Frequency: 8500 MHz; Maximum Operating Temperature: 85 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved